TY  - JOUR
TT  - Influence of boron content on microstructure and impact behavior of Zinc–Zluminium based ZA-12 alloy
AU  - Ayday, Aysun
PY  - 2018
DA  - July
DO  - 10.25092/baunfbed.370595
JF  - Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi
JO  - BAUN Fen. Bil. Enst. Dergisi
PB  - Balıkesir Üniversitesi
WT  - DergiPark
SN  - 1301-7985
SP  - 243
EP  - 249
VL  - 20
IS  - 1
KW  - Çinko-alüminyum
KW  - mikroyapı
KW  - darbe testi
KW  - bor
N2  - In this study, theeffect of boron (0, 0.1, 0.2, 0.4 B wt%) on the microstructure, hardness andimpact properties of a zinc-aluminum alloy (ZA-12) were investigated. Thealloys were produced under a controlled atmosphere by a gravity castingprocess. The results show that the addition of B element modified the structure,dendrites shape change to spherical shape and decrease of the eutectic lamellarspacing. The hardness value of ZA-12 increased with adding B. The same results wereobtained by impact test. The impact energy increased with increasing B addition.
CR  - Fatile B.O., Adewuyi B.O. and Owoyemi H.T., Synthesis and characterization of ZA-27 alloy matrix composites reinforced with zinc oxide nanoparticles, Engineering Science and Technology, an International Journal, 20, 1147–1154, (2017).
CR  - Şevik H., The effect of silver on wear behaviour of zinc–aluminium-based ZA-12 alloy produced by gravity casting, Materials Characterization, 89, 81–87, (2014).
CR  - Shivakumar, N., Vasu, V. and Narasaiah N, Processing and dry sliding wear behavior of Al2O3 nanoparticles reinforced ZA-27 composites, Materials Today: Proceedings, 4, 4006–4012, (2017).
CR  - Babic, M., Mitrovic, S. and Jeremic B., The influence of heat treatment on the sliding wear behavior of a ZA-27 alloy, Tribology International, 43, 16–21, (2010).
CR  - Çay, F. and Kurnaz, S.C., Hot tensile and fatigue behaviour of zinc–aluminum alloys produced by gravity and squeeze casting, Materials and Design, 26, 479–485, (2005).
CR  - Ataç, A.M. and Güral, A., Çinko-Alüminyum (ZA) alaşımlarının mekanik alaşımlama yöntemiyle üretilebilirliği üzerine bir çalışma, Politeknik Dergisi, 16, 4, 147-154, (2013).
CR  - Türk, A., Kurnaz, S.C. and Şevik, H., Comparison of the wear properties of modified ZA-8 alloys and conventional bearing bronze, Materials and Design, 28, 1889–1897, (2007).
CR  - Zhou, W.B., Liu, C.Y., Yu, P.F., Zhang, B., Ma, Z.Y., Luo, K., Ma, M.Z. and Liu, R.P., Effect of scandium on microstructure and mechanical properties of high zinc concentration aluminum alloys, Materials Characterization, 127, 371–378, (2017).
CR  - Kurnaz S.C., Production of saffil fibre reinforced Zn-Al (ZA 12) based metal matrix composites using infiltration technique and study of their properties, Materials Science and Engineering A, 346, 108-115, (2003).
UR  - https://doi.org/10.25092/baunfbed.370595
L1  - https://dergipark.org.tr/tr/download/article-file/390596
ER  -