TY - JOUR T1 - Isıl İşlemin Vernikli Ağaç Malzemede Renk Değişimine Etkisi TT - Impact of Heat Treatment on the Exchange of Color in Varnished Wood Materials AU - Atar, Musa AU - Yalınkılıç, A. Cihangir AU - Keskin, Hakan PY - 2019 DA - June DO - 10.2339/politeknik.404008 JF - Politeknik Dergisi PB - Gazi Üniversitesi WT - DergiPark SN - 2147-9429 SP - 407 EP - 413 VL - 22 IS - 2 LA - tr AB - Buçalışmada, ısıl işlemin vernikliağaç malzemede renk değişimineetkisi araştırılmıştır. Bu maksatla; Doğu Kayını (Fagus orientalis Lipsky), Sapsız Meşe (Quercus petreae Lieble.), Kara Kavak (Populus nigra Lipsky), Sarıçam (Pinussylvestris Lipsky) ve Uludağ Göknarı (Abiesbornmülleriana Mattf.) odunlarından TS 2470 ve TS 53’e göre hazırlananörnekler 165°C ve 175°C sıcaklık,  2 ve 4saat süre ile toplam 4 varyasyonda sıcaklığı ±1°C duyarlıkta kontrol edebilen ısıl işlem fırınında normal atmosferortamında bırakılmıştır. Üstyüzey işlemi için örnekler, ASTM D 3023’e göresentetik, parke ve su bazlı verniklerle kaplandıktan sonra vernikli yüzeylerdeASTM D 2244-02’e göre renk değişimi tespit edilmiştir. Sonuç olarak; toplam renk değişimi ağaç türü-ısıl işlem-vernikçeşidi etkileşimi düzeyinde en yüksek sentetik vernik uygulanmış 175/2 °C/Saatısıl işlemli kavakta (60,96), en düşük su bazlı vernik uygulanmış 165/2 °C/Saatısıl işlemli sarıçamda (10,95) elde edilmiştir. Buna göre, renk değişimiolmasının istenmediği veya en az istendiği mobilya ve dekorasyonuygulamalarında toplam renk değişimi değeri en düşük olan su bazlı vernikli ve165/2 °C/Saat ısıl işlemli sarıçam ağaç malzemenin kullanılması önerilebilir. KW - Isıl işlem KW - vernik KW - ağaç malzeme KW - renk değişimi N2 - This study investigatedthe effect of heat treatment discoloration of varnished wood materials. In this purpose; samplesof Oriental Beech (Fagus orientalis Lipsky), Oak (Quercus petreae Lieble.), Black Poplar (Populusnigra Lipsky), Scots Pine (Pinus sylvestris Lipsky) and Uludağ Fir (Abies bornmülleriana Mattf.) prepared in accordance with TS 2470 and TS53, were left in the heat-treatmentoven under normalatmosphere with temperatures of 165°C, 175°C, for periods of 2, 4 hours with ±1°C temperaturesensitivity in a total of 4 variations. For the surface processes, the samples werecoated with synthetic, parquet and water-based varnishes in accordance withASTM-D 3023 and color alteration according to ASTM D 2244-02 was determined.According to the results of the study; At the level of interaction between the type ofwood, type of heat-treatment and type of varnish; the highest value of totalcolor alteration was obtained from the poplar (60.96) which was varnished with Synthetic varnish and heat-treatedwith 175/2 (°C/Hours), the lowest value wasobtained from the pine (10.95) which was varnished with water-based varnish andheat-treated with 165/2 (°C/Hours). Accordingly, the colorchange is desired or required furniture and decoration applications at thelowest total color change the value of water-based varnish, and the use ofheat-treated pine wood were suggested CR - [1] Korkut S., Korkut D.S., Bekar İ., ‘‘Okaliptüs (Eucalyptus camaldulensis Dehn.) Odununun Bazı Teknolojik Özellikleri Üzerine Isıl İşlemin Etkisi’’, I. Ulusal Okaliptüs Sempozyumu, 209-214, Tarsus (2008). CR - [2] Tomak E.D., Yıldız Ü.C., ‘‘Odunun Kimyasal Modifikasyonu’’,III.Ulusal Karadeniz Ormancılık Kongresi, Artvin, 4:1681-1690 (2010). CR - [3] Wikberg H., ‘‘Advanced Solid State NMR Spectroscopic Techniques in the Study of Thermally Modified Wood’’, Academic Dissertation, University of Helsinki, Department of Chemistry, Laboratory of Polymer Chemistry, Helsinki-Finland (2004). CR - [4] Enjily V., Jones D., ‘‘The potential for modified materials in the panel products industry’’, Wood Resources and Panel Properties Conference, COST Action E44/E49, Valencia, Spain, 12-14 June, (2006). CR - [5] Korkut S., Kocaefe D., ‘‘Isıl İşlemin Odun Özellikleri Üzerine Etkisi’’, Düzce Üniversitesi Ormancılık Dergisi, 5(2): 11-34 (2009). CR - [6] Aydemir D., Gündüz G., ‘‘Ahşabın Fiziksel, Kimyasal, Mekaniksel ve Biyolojik Özellikleri Üzerine Isıyla Muamelenin Etkisi’’, Bartın Orman Fakültesi Dergisi, 11(15): 71-81, ISSN: 1302-0943 (2009). CR - [7] Bekhta P., Niemz P., ‘‘Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood’’, Holzforschung, 57 (5): 539-546 (2003). CR - [8] Çakıcıer N., Korkut S., Güler F.D., ‘‘Effects of heating treatment on some of the physical properties of varnish layers applied on various wood species’’, African Journal of Biotechnology, 10(9): 1578-1585 (2011). CR - [9] Edlund1 M.L., Jermer J., ‘‘Durability Of Heat-Treated Wood’’, Final Workshop COST Action E22 - Environmental Optimisation of Wood Protection, Lisboa-Portugal (2004). CR - [10] Ishiguri F., Masubuchi N., Yokota S., Yoshizawa N., ‘‘Changes in the physical and chemical properties of six Japanese softwoods caused by lengthy smoke - heating treatment’’, Journal of Wood Science, 51: 161–166 (2005). CR - [11] Johansson D., Mor'en T., ‘‘The potential of colour measurement for strength prediction of thermally treated wood’’, Holz als Roh- und Werkstoff, (64): 104-110 (2006). CR - [12] Karakaş G., ‘‘Ahlat (Pyrus elaeagnifolia Pall.) Odununun Fiziksel ve Mekanik Özellikleri Üzerine Isıl İşlemin Etkisi’’, Z.K.Ü., Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, Bartın (2008). CR - [13] Özçifçi A., Altun S., Yapıcı F., ‘‘Isıl İşlem Uygulanmış Ağaç Malzemenin Teknolojik Özelliklerine Etkisi’’, 5. Uluslararası İleri Teknolojiler Sempozyumu, 13-15 Mayıs 2009, Karabük, Türkiye (2009). CR - [14] Unsal O, Korkut S., Atik A., ‘‘The Effect of Heat Treatment on Some Properties and Colour in Eucalyptus (Eucalyptus camaldulensis Dehn.) Wood’’, Maderas Ciencia y tecnologia, 5(2): 145-152 (2003). CR - [15] TS 53, ‘‘Odunun fiziksel özelliklerini tayin için numune alma, muayene ve deney metotları’’, T.S.E., Ankara, 1-5 (1981). CR - [16] TS 2470, ‘‘Odunda Fiziksel ve Mekaniksel Deneyler İçin Numune Alma Metotları ve Genel Özellikleri’’, T.S.E., Ankara, 1-5 (1976). CR - [17] ASTM D 3023, ‘‘Standard practice for determination of resistance of factory - applied coatings on wood products to stains and reagents’’, ASTM Standards, 1-3 (1998). CR - [18] ASTM D 3924, ‘‘Standard Specification for Standart Environment for Condintioning and Testing Point Varnish, Lacquer and Related Materials’’, ASTM Standards, USA, (1991). CR - [19] ASTM D 2244, “Standard Practice for Calculation or Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates”, ASTM Standards, A.B.D., 1-13 (2007). CR - [20] Anonim, “Minolta CR-231 Chromometer, ver 3.0.”, Cihaz Kullanma Klavuzu, Ankara (2000). CR - [21] Çağlar A., Yamanel K., ‘‘Diş renginin belirlenmesinde kullanılan yöntemler’’, ADO Klinik Bilimler Dergisi, 2(1): 49-54 (2007). CR - [22] Söğütlü C., Sönmez A., "Değişik Koruyucular ile İşlem Görmüş Bazı Yerli Ağaçlarda UV Işınlarının Renk Değiştirici Etkisi", Gazi Üniversitesi Müh. Mimarlık Fak. Dergisi, 21(1): 151-159 (2006). UR - https://doi.org/10.2339/politeknik.404008 L1 - https://dergipark.org.tr/tr/download/article-file/438513 ER -