TY  - JOUR
T1  - Fiziksel Zenginleştirme ve Hidrometalurjik Yöntemlerle Kuvars Cevherinden Demir Uzaklaştırma
TT  - Removal of Iron from Quartz Ore by Physical Enrichment and Hydrometallurgical Methods
AU  - Akçil, ATA UTKU
AU  - Tuncuk, Ayşenur
AU  - Candan Tosun, Yasemin
AU  - Okudan, Mediha Demet
PY  - 2020
DA  - January
DO  - 10.21205/deufmd.2020226419
JF  - Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
JO  - DEUFMD
PB  - Dokuz Eylül Üniversitesi
WT  - DergiPark
SN  - 1302-9304
SP  - 187
EP  - 197
VL  - 22
IS  - 64
LA  - tr
AB  - Kuvarsın saflaştırılması,içeriğindeki demirin kimyasal yöntemlerle uzaklaştırılıp öncelikli olarak cam,elektronik, deterjan, seramik, boya, refrakter, metalürji sanayilerindekullanılabilecek hale getirilmesi açısından önemlidir. Bu çalışmada kuvars cevherlerinden özellikle demir gibisafsızlıkların fiziksel ve kimyasal yöntemler ile uzaklaştırılması ve yükseksaflıkta, nitelikli ürün eldesi laboratuar ölçekte araştırılmıştır. Yüksek alanşiddetli manyetik ayırıcı ile manyetik özelliğe sahip safsızlıklaruzaklaştırılmış, liç testlerinde ise farklı asitlerin performansı, sıcaklık,liç süresi, katı/sıvı oranı, ve asit derişimi gibi parametrelerin demiruzaklaştırma verimine etkisi incelenmiştir. Başlangıçta 400 ppm Fe2O3içeriğine sahip kuvars örneği ile yapılan deneysel çalışmalar sonucunda Fe2O3içeriği 37,8 ppm’e düşürülmüş, beyazlık indeksi değeri de 87,43’den 96,81’eyükseltilmiştir.
KW  - Demir uzaklaştırma
KW  - Fiziksel ve kimyasal ayırma
KW  - Kuvars
KW  - Liç
KW  - Saflaştırma
N2  - Removal ofimpurities (iron in particular) from quartz using aqueous chemical processes isimportant for its potential use in many industries including detergent,ceramics, paint, refractory, metallurgy and, in particular, glass andelectronic industries to fulfill the desired requirements by these industriesfor high quality quartz as raw material. In this study the removal ofimpurities, iron in particular, from the quartz ore by physical and chemicalmethods with the aim of producing high quality quartz with desiredspecifications were investigated on laboratory scale. Impurities with magneticproperties were removed by high field intense magnetic separator and inleaching tests, the influence of various factors including the performance ofacids, reagent type/concentration, temperature, leaching time and solid/liquidratio and extent of the removal of iron were studied. After the experimentalstudies with quartz sample, Fe2O3 content was decreasedto 37,8 ppm from 400 ppm, whiteness index was also increased to 96,81 from87,43.
CR  - Breiter, K., Svojtka, M., Ackerman, L., Švecová, C. 2012. Trace Element Composition of Quartz from the Variscan Altenberg–Teplice Caldera (Krušné Hory/Erzgebirge Mts, Czech Republic/Germany): Insights into the Volcano-Plutonic Complex Evolution, Chemical Geology, Cilt. 326-327, s. 36-50. DOI: 10.1016/j.chemgeo.2012.07.028
CR  - Boussaa, A.S., Kheloufi, A., Zaourar, B.N. 2017. Characterization of Impurities Present on Tihimatine (Hoggar) Quartz, Algeria, Journal of African Earth Sciences, Cilt.135, s. 213–219. DOI: 10.1016/j.jafrearsci.2017.09.001
CR  - Boussa, A.S., Kheloufi, A., Zaourar, B.N., Kefaifi, A., Kerkar, F. 2016. Characterization of Silica Quartz as Raw Material in Photovoltaic Applications, AIP Conference Proceedings 1758, 030043, DOI: 10.1063/1.4959439
CR  - Larsen, E., Kleiv, R.A. 2015. Towards a New Process for the Flotation of Quartz, Minerals Engineering, Cilt.83, s. 13–18. DOI: 10.1016/j.mineng.2015.08.004
CR  - Conibeer, G. Wurfl, I.P., Hao, X., Di, D., Lin, D. 2012. Si Solid-State Quantum Dot-Based Materials for Tandem Solar Cells, Nanoscale Research Letters, Cilt.7, s. 2–7. DOI: 10.1186/1556-276X-7-193
CR  - Yu, Y., Ming, P., Zhou, S. 2014. Numerical Study on Transient Heat Transfer of a Quartz Lamp Heating System, Mathematical Problems in Engineering, Cilt.2014, 11s. DOI: 10.1155/2014/530476
CR  - O’Sullivan, C.K., Guilbault, G. G. 1999. Commercial Quartz Crystal Microbalances - Theory and Applications, Biosensors & Bioelectronics, Cilt.14, No. 8–9, s. 663–670. DOI: 10.1016/S0956-5663(99)00040-8
CR  - Booth, C.F. 1941. The Application and Use of Quartz Crystals in Telecommunications, Electrical Engineers-Part III: Communication Engineering, including the Proceedings of the Wireless Section of the Institution, Journal of the Institution, Cilt.88, No. 2, s. 97. DOI: 10.1049/ji-3-1.1941.0011
CR  - Nohira, T., Yasuda, K., Ito, Y. 2003. Pinpoint and Bulk Electrochemical Reduction of Insulating Silicon dioxide to Silicon, Nature Materials, Cilt.2, s. 397-401. DOI: 10.1038/nmat900
CR  - Jin, X., Gao, P., Wang, D., Hu, X., Chen, G.Z. 2004. Electrochemical Preparation of Silicon and its Alloys from Solid Oxides in Molten Calcium Chloride, Angewandte Chemie - International Edition, Cilt.43, No. 6, s. 733–736. DOI: 10.1002/anie.200352786
CR  - Banza, A.N., Quindt, J., Gock, E. 2006. Improvement of the Quartz Sand Processing at Hohenbocka, International Journal of Mineral Processing, Cilt.79, No. 1, s. 76–82. DOI: 10.1016/j.minpro.2005.11.010
CR  - Taxiarchou, M., Panias, D., Douni, I., Paspaliaris, I., Kontopoulos, A. 1997. Removal of Iron from Silica Sand by Leaching with Oxalic Acid, Hydrometallurgy, Cilt.46, No. 1-2, s. 215-227. DOI: 10.1016/S0304-386X(97)00015-7
CR  - Akcil, A., Tuncuk, A. 2006. Kaolenlerin Safsızlaştırılmasında Kimyasal ve Biyolojik Yöntemlerin İncelenmesi, Kil Bilimi ve Teknoloji Dergisi, Cilt.1, No. 2, s. 59-69.
CR  - Tuncuk, A., Akcil, A. 2014. Removal of Iron from Quartz Ore Using Different Acids: A Laboratory-Scale Reactor Study, Mineral Processing and Extractive Metallurgy Review, Cilt.35, No. 4, s. 217–228. DOI: 10.1080/08827508 .2013.825614
CR  - Cao, W., Xia, G., Lu, M., Huang, H., Xu, Y. 2016. Iron Removal from Kaolin Using Binuclear Rare Earth Complex Activated Thiourea Dioxide, Applied Clay Science, Cilt. 126, s. 63-67. DOI: 10.1016/j.clay.2016.03.002
CR  - Kheloufi, A. 2009. Acid Leaching Technology for Obtaining a High-Purity of Silica for Photovoltaic Area, Chemical Engineering Transactions, Cilt.17, s. 197-202. DOI: 10.3303/CET0917034
CR  - Ledgerwood, J., Westhuyzen, P. 2011. The Use of Sulphuric Acid in the Mineral Sands Industry as a Chemical Mechanism for Iron Removal, The Southern African Institute of Mining and Metallurgy, 6th Southern African Base Metals Conference, s. 169-186.
CR  - Zhang, Z., Li, J., Li, X., Huang, H., Zhou, L., Xiong, T. 2012. High Efficiency Iron Removal from Quartz Sand Using Phosphoric Acid, International Journal of Mineral Processing, Cilt. 114–117, s. 30–34. DOI: 10.1016/j.minpro.2012.09.001
CR  - Štyriaková, I., Mockovčiaková, A., Štyriak, I., Kraus, I., Uhlik, P., Madejová, J., Orolínová, Z. 2012. Bioleaching of Clays and Iron Oxide Coatings from Quartz Sands, Applied Clay Science, Cilt. 61, s. 1-7. DOI: 10.1016/j.clay.2012.02.020
CR  - Al-Maghrabi, M.N.H., 2004. Improvement of Low-Grade Silica Sand Deposits in Jeddah Area, Engineering Sciences, Cilt.15, No. 2, s. 113-128. DOI: 10.4197/eng.15-2.8.
CR  - Suratman, S. 2015. Removal of Metallic Impuruties from Quartz Sand Using Oxalic Acid, Indonesian Mining Journal, Cilt.18, No. 3, s. 133-141. DOI: 10.30556/imj.Vol18.No3.2015.262
CR  - Anonim, 2001. Sekizinci Beş Yıllık Kalkınma Planı, Madencilik Özel İhtisas Komisyonu Raporu, Endüstriyel Hammaddeler Alt Komisyonu, Toprak Sanayii Hammaddeleri III (Kuvars kumu, Kuvarsit, Kuvars) Çalışma Grubu Raporu, Devlet Planlama Teşkilatı, 37s., Ankara.
CR  - Ashrafi, H., Emadi, R., Foroushani, Z.R. 2015. Synthesis and Characterization of Mullite–Zirconia Nanostructured Composite by Combined Mechanical Activation and Reaction Sintering, Advanced Powder Technology, Cilt. 26, No. 5, s. 1452-1457. DOI: 10.1016/j.apt.2015.08.001
CR  - Baláž, P., Achimovičová, M. 2006. Mechano-Chemical Leaching in Hydrometallurgy of Complex Sulphides, Hydrometallurgy, Cilt.84, No. 1-2, s. 60-68. DOI: 10.1016/j.hydromet.2006.04.006
CR  - Goktas, M. 2018. Cevher Hazirlamada Mekani̇k Akti̇vasyon Uygulamalari, Bilimsel Madencilik Dergisi, Cilt. 57, No. 1, s. 57–66.
CR  - Liu, A., Fan, M., Fan, P. 2014. Interaction Mechanism of Miscible DDA–Kerosene and Fine Quartz and Its Effect on the Reverse Flotation of Magnetic Separation Concentrate, Minerals Engineering, Cilt.65, s. 41-50. DOI: 10.1016/j.mineng.2014.05.008
CR  - Ubaldini, S., Piga, L., Fornari, P., Massida, R. 1996. Removal of Iron from Quartz Sands: A study by Column Leaching Using a Complete Factorial Design, Hydrometallurgy, Cilt.40, No. 3, s. 369-379. DOI: 10.1016/0304-386X(95)00012-6
CR  - Šuba, J., Štyriaková, D. 2015. Iron Minerals Removal from Different Quartz Sands, Procedia Earth and Planetary Science, Cilt. 15, s. 849–854. DOI: 10.1016/j.proeps.2015.08.136
CR  - Toro, L., Marabini, A.M., Paponetti, B., Passariello, B. 1993. Process for Removing Iron from Kaolin, Quartz and Other Mineral Concentrates of Industrial Interest, United States Patent, Patent Number: 5,190,900
CR  - Bonney, C. F. 1994. Removal of Iron from Kaolin and Quartz: Dissolution with Organic Acids, Hydrometallurgy’94, Cambridge, United Kingdom, s. 313–323.
CR  - Veglio, F., Passariello, B., Barbaro, M., Plescia, P., Marabini, A.M. 1998. Drum Leaching Tests in Iron Removal from Quartz Using Qxalic and Sulphuric Acids, International Journal of Mineral Processing, Cilt. 54, No. 3-4, s. 183-200. DOI: 10.1016/S0301-7516(98)00014-3
CR  - Vegliò, F., Passariello, B., Abbruzzese, C. 1999. Iron Removal Process for High-Purity Silica Sands Production by Oxalic Acid Leaching, Industrial Engineering Chemistry Research, Cilt. 38, No. 11, s. 4443–4448. DOI: 10.1021/ie990156b
CR  - Du, F., Li, J., Li, X., Zhang, Z. 2011. Improvement of Iron Removal from Silica Sand Using Ultrasound-Assisted Oxalic Acid, Ultrasonics Sonochemistry, Cilt.18, No. 1, s. 389-393. DOI: 10.1016/j.ultsonch.2010.07.006
CR  - Veglio, F., Toro, L. 1994. Process Development of Kaolin Pressure Bleaching Using Carbohydrates in Acid Media, International Journal of Mineral Processing, Cilt.41, No. 3-4, s. 239-255. DOI: 10.1016/0301-7516(94)90031-0
CR  - Cameselle, C., Núñez, M.J., Lema, J.M. 1997. Leaching of Kaolin Iron-Oxides with Organic Acids, Journal of Chemical Technology & Biotechnology, Cilt. 70, No. 4, s. 349–354. DOI: 10.1002/(SICI)1097-4660(199712)70:4
CR  - Tuncuk, A., Ciftlik, S., Akcil, A. 2013. Factorial Experiments for Iron Removal from Kaolin by Using Single and Two-Step Leaching with Sulfuric Acid, Hydrometallurgy, Cilt. 134–135, s. 80–86. DOI: 10.1016/j.hydromet.2013.02.006
CR  - Cameselle, C., Núñez, M.J., Lema, J.M., Pais, J. 1995. Leaching of Iron from Kaolins by a Spent Fermentation Liquor: Influence of Temperature, pH, Agitation and Citric Acid Concentration Journal of Industrial Microbiology and Biotechnology Cilt.14, No. 3-4, s. 288-292. DOI: 10.1007/BF01569941
UR  - https://doi.org/10.21205/deufmd.2020226419
L1  - https://dergipark.org.tr/tr/download/article-file/935968
ER  -