@article{article_601225, title={Design and Finite Element Analysis of a Foldable and Single-Arm Wheelchair Lift for M-Class Vehicles}, journal={Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi}, volume={34}, pages={33–42}, year={2019}, DOI={10.21605/cukurovaummfd.601225}, author={Uludamar, Erinç}, keywords={Tekerlekli sandalye asansörü,Sonlu elemanlar metodu,Yapısal analiz,Titreşim}, abstract={<p style="text-align: justify; ">Commercially, many types of lifts and ramps are available to help the wheelchair users getting on and off the vehicles. In this study, a foldable wheelchair lift, which has a single arm was analysed by Finite Element Method according to specified maximum carrying mass of 300 kg in Directive 2001/85/EC. Examination was carried out on the manufactured wheelchair lift to validate the result of Finite Element Analysis. Initial analyses have shown that the lift is insufficient to be safe. Hence a modification was performed on the lift. After the modification, maximum von-Mises stress was calculated as 300.15 MPa in the cantilever beam of the platform which is produced by S355JR quality steel. The largest deformation was measured as 82.4 mm and 78.3 mm on the manufactured lift and on the model, respectively. Modal analysis indicates the result of the first eight modes occurred in low frequencies. </p>}, number={1}, publisher={Çukurova Üniversitesi}