TY - JOUR T1 - THE INFLUENCES OF ALTERING THE MIXING CONDITIONS ON THE PROPERTIES OF POLYMER MODIFIED BITUMEN: AN OVERVIEW TT - Karıştırma Koşullarının Polimer Modifiye Bitümün Özellikleri Üzerindeki Etkileri: Genel Bir Bakış AU - Kaya Özdemir, Derya AU - Topal, Ali AU - Sengoz, Burak PY - 2020 DA - August Y2 - 2020 DO - 10.17482/uumfd.711987 JF - Uludağ Üniversitesi Mühendislik Fakültesi Dergisi JO - UUJFE PB - Bursa Uludağ Üniversitesi WT - DergiPark SN - 2148-4155 SP - 1105 EP - 1116 VL - 25 IS - 2 LA - en AB - Modification of bitumen by different modifiers, causes the morphological, rheological and chemical characterisation differences related to the following three main factors: the type of the polymer, bitumen components and blending conditions. Manufacturing conditions can be investigated in several groups such as; mixing temperature, duration of mixing and shear rate (mixing speed). These manufacturing conditions are the key parameters, since they act an important role on the properties of the final product. These key parameters and their effects have always been an interesting topic for the researchers, because they may have some consequences like aging of the sample, degradation of the polymer or sometimes less absorption of the polymer by bitumen etc. This study aims to present the influences of mixing conditions on different properties of the bituminous mixtures with the help of reviewing the previous studies in the literature. KW - Polymer Modified bitumen KW - Mixing conditions KW - Key parameters KW - Shear rate KW - Duration of mixing KW - Mixing temperature N2 - Bitümün farklı polimerler ile modifikasyonu, polimerin tipi, bitüm bileşenleri ve karışım koşulları gibi faktörlere bağlı olarak, reolojik ve kimyasal karakterizasyon farklılıklarına neden olur. Anahtar parametreler olarak da adlandırılabilen karışım koşulları; karıştırma sıcaklığı, karıştırma süresi, kesme oranı (karıştırma hızı) gibi alt başlıklarla incelenebilir. Polimer Modifiye Bitüm (PMB) karışım koşulları, ya da diğer bir deyişle anahtar parametreler, malzemenin yaşlanma özellikleri, polimerin degredasyonu ya da polimerin bitüm tarafından emilimi gibi PMB karakterizasyonu üzerinde önemli etkilere sahiptir ve bu sebeple araştırmacılar için her zaman ilgi çekici bir konu olmuştur. Bu çalışma, literatürde şimdiye kadar gerçekleştirilmiş ve PMB’nin üretiminde karışım koşullarının etkisini ortaya koyan yayınların derlemesini sunarak anahtar parametrelerin önemini ortaya koymayı amaçlamaktadır. CR - 1. Al-Rub, R. K. A., Darabi, M. K., Little, D. N. and Masad, E. A. (2010). A micro-damage healing model that improves prediction of fatigue life in asphalt mixes. International Journal of Engineering Science, 48(11), 966-990. doi:10.1016/j.ijengsci.2010.09.016 CR - 2. Alsoliman, H. A. 2010 Engineering characteristics of local polymer modified asphalt mixtures, Doctoral Thesis, King Saud University, Riyad. CR - 3. Babalghaith, A. M., Koting, S., Sulong, N. H. R. and Karim, M. R. (2019). Optimization of mixing time for polymer modified asphalt. In IOP Conference Series: Materials Science and Engineering, 512(1), 1-8. doi:10.1088/1757-899x/512/1/012030 CR - 4. Bagshaw, S. A., Kemmitt, T., Waterland, M. and Brooke, S. (2019). Effect of blending conditions on nano-clay bitumen nanocomposite properties. Road Materials and Pavement Design, 20(8), 1735-1756. doi: 10.1080/14680629.2018.1468802 CR - 5. Bearsley, S., Forbes, A. and G. Haverkamp, R. (2004). Direct observation of the asphaltene structure in paving‐grade bitumen using confocal laser‐scanning microscopy. Journal of Microscopy, 215(2), 149-155. doi:10.1111/j.0022-2720.2004.01373.x CR - 6. Berthomieu, C. and Hienerwadel, R. (2009). Fourier transform infrared (FTIR) spectroscopy. Photosynthesis research, 101(2-3), 157-170. doi:10.1007/s11120-009-9439-x CR - 7. Brûlé, B., Brion, Y. and Tanguy, A. (1988). Paving asphalt polymer blends: Relationships between composition, structure and properties, Proc Assoc Asphalt Paving Technologists, 57, 41-64. CR - 8. Collins, J., Bouldin, M., Gelles, R. and Berker, A. (1991). Improved performance of paving asphalts by polymer modification. Journal of the Association of Asphalt Paving Technologists, 60, 43-79. CR - 9. Dehouche, N., Kaci, M. and Mouillet, V. (2016). The effects of mixing rate on morphology and physical properties of bitumen/organo-modified montmorillonite nanocomposites. Construction and Building Materials, 114, 76-86. doi: 10.1016/j.conbuildmat.2016.03.151 CR - 10. Doğan, M. and Bayramli, E. (2009). Effect of polymer additives and process temperature on the physical properties of bitumen‐based composites. Journal of Applied Polymer Science, 113(4), 2331-2338. doi: 10.1002/app.30280 CR - 11. Fang, C., Liu, P., Yu, R. and Liu, X. (2014). Preparation process to affect stability in waste polyethylene-modified bitumen. Construction and Building Materials, 54, 320-325. doi: 10.1016/j.conbuildmat.2013.12.071 CR - 12. Forbes, A., Haverkamp, R. G., Robertson, T., Bryant, J. and Bearsley, S. (2001). Studies of the microstructure of polymer‐modified bitumen emulsions using confocal laser scanning microscopy. Journal of Microscopy, 204(3), 252-257. CR - 13. García‐Morales, M., Partal, P., Navarro, F. J., Martínez‐Boza, F. J. and Gallegos, C. (2007). Processing, rheology, and storage stability of recycled EVA/LDPE modified bitumen. Polymer Engineering & Science, 47(2), 181-191. doi: 10.1002/pen.20697 CR - 14. Gingras, J., Tanguy, P., Mariotti, S. and Chaverot, P. (2005). Effect of process parameters on bitumen emulsions. Chemical Engineering and Processing: Process Intensification, 44(9), 979-986. doi:10.1016/j.cep.2005.01.003 CR - 15. Haddadi, S., Ghorbel, E. and Laradi, N. (2008). Effects of the manufacturing process on the performances of the bituminous binders modified with EVA. Construction and Building Materials, 22(6), 1212-1219. doi:10.1016/j.conbuildmat.2007.01.028 CR - 16. Handle, F., Füssl, J., Neudl, S., Grossegger, D., Eberhardsteiner, L., Hofko, B., et al. (2014). Understanding the microstructure of bitumen: a CLSM and fluorescence approach to model bitumen ageing behavior. The 12th ISAP International Conference on Asphalt Pavements, Raleigh. CR - 17. Handle, F., Grothe, H. and Neudl, S. (2012). Confocal laser scanning microscopy—observation of the microstructure of bitumen and asphalt concrete. 5th Eurasphalt & Eurobitume Congress, Istanbul. Retrieved March 30, 2020, from https://publik.tuwien.ac.at/files/PubDat_211706. CR - 18. Hatakeyama, T. and Quinn, F. (1999). Thermal analysis. Wiley, New York. CR - 19. Hou, Y., Wang, L., Wang, D., Guo, M., Liu, P. and Yu, J. (2017). Characterization of bitumen micro-mechanical behaviors using AFM, phase dynamics theory and MD simulation. Materials, 10(208), 1-16. doi:10.3390/ma10020208 CR - 20. Kaya, D., Topal, A. and McNally, T. (2019a). Relationship between processing parameters and aging with the rheological behaviour of SBS modified bitumen. Construction and Building Materials, 221, 345-350. doi:10.1016/j.conbuildmat.2019.06.081 CR - 21. Kaya, D., Topal, A. and McNally, T. (2019b). Correlation of processing parameters and ageing with the phase morphology of styrene-butadiene-styrene block co-polymer modified bitumen. Materials Research Express, 6(10), 1-24. doi:10.1088/2053-1591/ab349c CR - 22. Kaya, D., Topal, A. Sengoz B. and Aghazadeh, P. (2018). Short Term and Long Term Aging Performance Effects of Mixing Conditions on the Rheological Characteristics of Styrene-Butadiene-Styrene Modified Bitumen. The 13th ISAP International Congress on Advances in Civil Engineering, Izmir, Turkey. CR - 23. Kaya, D., Topal, A., Gupta, J. and McNally, T. (2020). Aging effects on the composition and thermal properties of styrene-butadiene-styrene (SBS) modified bitumen. Construction and Building Materials, 235, 117450. doi:10.1016/j.conbuildmat.2019.117450 CR - 24. Kök, B. V., Yılmaz, M., Kuloğlu, N. and Alataş, T. (2011). Investigation of the Rheological Properties of SBS Modified Binder Produced by Different Methods. Sigma, 29, 272-288. CR - 25. Lambert, J. B. (2005). The 2004 Edelstein award address, The deep history of chemistry. Bulletin for the History of Chemistry, 30, 1-9. CR - 26. Larsen, D. O., Alessandrini, J. L., Bosch, A. and Cortizo, M. S. (2009). Micro-structural and rheological characteristics of SBS-asphalt blends during their manufacturing. Construction and Building Materials, 23(8), 2769-2774. doi:10.1016/j.conbuildmat.2009.03.008 CR - 27. Lee, Y., France, L. M. and Hawley, M. C. (1997). The effect of network formation on the rheological properties of SBR modified asphalt binders. Rubber Chemistry and Technology, 70(2), 256-263. doi:10.5254/1.3538430 CR - 28. Liu, Y., Zhang, J., Chen, R., Cai, J., Xi, Z. and Xie, H. (2017). Ethylene vinyl acetate copolymer modified epoxy asphalt binders: phase separation evolution and mechanical properties. Construction and Building Materials, 137, 55-65. doi:10.1016/j.conbuildmat.2017.01.081 CR - 29. Loeber, L., Sutton, O., Morel, J., Valleton, J. M. and Muller, G. (1996). New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy. Journal of Microscopy, 182(1), 32-39. doi:10.1046/j.1365-2818.1996.134416.x CR - 30. Mahboob Kanafi, M., Kuosmanen, A., Pellinen, T. K. and Tuononen, A. J. (2015). Macro-and micro-texture evolution of road pavements and correlation with friction. International Journal of Pavement Engineering, 16(2), 168-179. doi:10.1080/10298436.2014.937715 CR - 31. Martín-Alfonso, M., Partal, P., Navarro, F., García-Morales, M., Bordado, J. and Diogo, A. (2009). Effect of processing temperature on the bitumen/MDI-PEG reactivity. Fuel Processing Technology, 90(4), 525-530. doi:10.1016/j.fuproc.2009.01.007 CR - 32. Mohan, S. A., Woldekidan, M. F. and Qiu, J. (2013). Effects of mixing procedures on the properties of polymer modified bitumen. In Proceedings of the International Conferences on the Bearing Capacity of Roads, Railways and Airfields, 687-698. CR - 33. Navarro, F., Partal, P., Martínez‐Boza, F. and Gallegos, C. (2007). Influence of processing conditions on the rheological behavior of crumb tire rubber‐modified bitumen. Journal of Applied Polymer Science, 104(3), 1683-1691. doi:10.1002/app.25800 CR - 34. Newman, J. K. (1998). Dynamic shear rheological properties of polymer-modified asphalt binders. Journal of Elastomers & Plastics, 30(3), 245-263. doi:10.1177/009524439803000305 CR - 35. Ortega, F., Navarro, F., García-Morales, M. and McNally, T. (2015). Thermo-mechanical behaviour and structure of novel bitumen/nanoclay/MDI composites. Composites Part B: Engineering, 76, 192-200. doi:10.1016/j.compositesb.2015.02.030 CR - 36. Reading, M., Luget, A. and Wilson, R. (1994). Modulated differential scanning calorimetry. Thermochimica Acta, 238, 295-307. doi:10.1016/s0040-6031(94)85215-4 CR - 37. Rozeveld, S. J., Shin, E. E., Bhurke, A., France, L. and Drzal, L. T. (1997). Network morphology of straight and polymer modified asphalt cements. Microscopy Research and Technique, 38(5), 529-543. doi:10.1002/(sici)1097-0029(19970901)38:5 <529::aid-jemt11>3.0.co;2-o CR - 38. Sam, Z., Lin, L. and Ashok, K. (2009). Materials Characterization Techniques. Taylor & Francis Group Cap, 7, 177-205. CR - 39. Shaffie, E., Arshad, A. K., Alisibramulisi, A., Ahmad, J., Hashim, W., Abd Rahman, Z. and Jaya, R. P. (2018). Effect of mixing variables on physical properties of modified bitumen using natural rubber latex. International Journal of Civil Engineering and Technology, 9, 1812-1821. CR - 40. Shafii, M. A., Veng, C. L. Y., Rais, N. M. and Ab Latif, A. (2017). Effect of blending temperature and blending time on physical properties of NRL-modified bitumen. International Journal of Applied Engineering Research, 12(13), 3844-3849. CR - 41. Shenoy, A. (2001). Determination of the temperature for mixing aggregates with polymer-modified asphalts. International Journal of Pavement Engineering, 2(1), 33-47. doi:10.1080/10298430108901715 CR - 42. Skoog, D. and Leary, J. (1996). Instrumentelle Analytik. Springer Verlag, Berlin. CR - 43. Soenen, H., Besamusca, J., Fischer, H. R., Poulikakos, L. D., Planche, J., Das, P. K., et al. (2014). Laboratory investigation of bitumen based on round robin DSC and AFM tests. Materials and Structures, 47(7), 1205-1220. doi:10.1617/s11527-013-0123-4 CR - 44. Takamura, K. and Heckmann, W. (1999). Polymer network formation in the emulsion residue recovered by forced air drying. The 2nd International Symposium on Asphalt Emulsion Technology. Retrieved March 30, 2020 from https://s3.amazonaws.com/academia.edu.documents. CR - 45. Wang, M. and Liu, L. (2017). Investigation of microscale aging behavior of asphalt binders using atomic force microscopy. Construction and Building Materials, 135, 411-419. doi:10.1016/j.conbuildmat.2016.12.180 CR - 46. Wegan, V., (2001) "Effect of Design Parameters on Polymer Modified Bituminous Mixtures," Danish Road Institute CR - 47. Yoon, S., Bhatt, S., Lee, W., Lee, H. Y., Jeong, S. Y., Baeg, J., et al. (2009). Separation and characterization of bitumen from Athabasca oil sand. Korean Journal of Chemical Engineering, 26(1), 64-71. doi:10.1007/s11814-009-0011-3 CR - 48. Yu, J.-Y., Feng, Z.-G., and Zhang, H.-L. (2011). Ageing of polymer modified bitumen (PMB). In Polymer modified bitumen (pp. 264-297). Woodhead Publishing, Cambridge. CR - 49. Zhang, H., Yu, J., Wang, H. and Xue, L. (2011). Investigation of microstructures and ultraviolet aging properties of organo-montmorillonite/SBS modified bitumen. Materials Chemistry and Physics, 129(3), 769-776. doi:10.1016/j.matchemphys.2011.04.078 UR - https://doi.org/10.17482/uumfd.711987 L1 - https://dergipark.org.tr/tr/download/article-file/1029659 ER -