TY  - JOUR
T1  - Dalgıç Pompa Elektrik Motorunun İyileştirilmesi
AU  - Altıntaş, Nihan
AU  - Samur, Kamil
PY  - 2020
DA  - August
Y2  - 2020
DO  - 10.46578/humder.738310
JF  - Harran Üniversitesi Mühendislik Dergisi
JO  - HUMDER
PB  - Harran Üniversitesi
WT  - DergiPark
SN  - 2528-8733
SP  - 82
EP  - 93
VL  - 5
IS  - 2
LA  - tr
AB  - Dalgıç pompalarda elektrik motoru olarak genellikle tek ve üç fazlı sincap kafesli asenkron motorlar kullanılır. Bu çalışmada, Ansys Maxwell/RMxprt programı kullanılarak piyasada bulunan bir firmaya ait üç fazlı sincap kafesli asenkron dalgıç pompası motorunun verimini artırmak üzere çalışmalar yapılmıştır. Mevcut motorun verimini arttırmak için stator ve rotor oluk yapıları, malzeme cinsi, stator paket boyu, sipir sayısı ve hava aralığı büyüklüklerinin analizleri yapılarak, optimum değerler elde edilmiştir. Yeni tasarım motora ait performans parametreleri ile firmaya ait ürün kataloğunda yer alan bilgiler karşılaştırılmıştır. Yeni tasarım sayesinde mevcut motorun nominal akımında %3, güç faktöründe %1, veriminde %2 oranında iyileşme sağlanmıştır.
KW  - Dalgıç pompa
KW  - Asenkron motor
KW  - Verim
KW  - Oluk yapısı
CR  - [1]	Üstünel Dalgıç Pompa firmasına ait 2019 tarihli firma kataloğu
CR  - [2]	C. Shumei, D. Ying and S. Liwei, "Rotor Slots Design of Induction Machine for Hybrid Electric Vehicle Drives" IEEE Vehicle Power and Propulsion Conference, Windsor, 2006, pp.1-3. doi:10.1109/VPPC.2006.364375
CR  - [3]	E. Makhetha, M. Muteba and D. V. Nicolae, "Effect of Rotor bar Shape and Stator Slot Opening on the Performance of Three Phase Squirrel Cage Induction Motors with Broken Rotor Bars”, Southern African Universities Power Engineering Conference / Robotics and Mechatronics / Pattern Recognition Association of South Africa (SAUPEC /RobMech), Bloemfontein, South Africa, 2019, pp.463-468. doi:10.1109/RoboMech.2019.8704850
CR  - [4]	P. Lumyong and P. Sarikprueck, “A Study on Induction Motor Efficiency Improvement for Implementing in Electric Vehicle”, 21st International Conference on Electrical Machines and Systems (ICEMS), Jeju, 2018, pp.616-619, doi:10.23919/ICEMS.2018.8549478
CR  - [5]	Donolo, P., Bossio, G. ve De Angelo, C., “Analysis of Voltage Unbalance Effects on Induction Motors with Open and Closed Slots”, Energy Conversion and Management, vol.52, pp.2024-2030, 2011. doi:10.1016/j.enconman.2010.10.045
CR  - [6]	J. L. Kirtley, J. G. Cowie, E. F. Brush, D. T. Peters and R. Kimmich, “Improving Induction Motor Efficiency with Die-cast Copper Rotor Cages”, IEEE Power Engineering Society General Meeting, Tampa, FL, 2007, pp.1-6, doi:10.1109/PES.2007.385767
CR  - [7]	Y.Huang and H.Wang “Structure Design of Asynchronous Frequency Conversion Motor with Cast Copper Rotor”, 19th International Conference on Electrical Machines and Systems (ICEMS), Chiba, Japan, 2016.
CR  - [8]	Ashwin D, Ashok S, M. Dixit and V. Chavan, “Design optimization of 15 kW, 2-pole induction motor to achieve IE4 efficiency level with copper diecasting”, IEEE International Conference on Technological Advancements in Power & Energy, 2015. doi:10.1109/TAPENERGY.2015.7229599
CR  - [9]	P.W. Han, U.J.Seo, J.H.Choi, Y.D.Chun, D.H.Koo and J.Lee “Optimizing Design Variables for High Efficiency Induction Motor Considering Cost Effect by Using Genetic Algorithm”, Journal of Electrical Engineering and Technology (JEET), vol.7, pp.948-953, 2012. doi:10.5370/JEET.2012.7.6.948
CR  - [10]	Y. Yanawati et al., “Efficiency increment of 0.5hp induction motor by using different thickness of rotor lamination steel sheet via FEM”, 5th International Power Engineering and Optimization Conference, Shah Alam, Selangor, 2011, pp.188-192. doi:10.1109/PEOCO.2011.5970407
CR  - [11]	C.Saravanan, J.Sathiswar and S.Raja “Performance of Three Phase Induction Motor using Modified Stator Winding”, International Journal of Computer Applications, vol. 46, no.1, 2012.
CR  - [12]	M. Kondo, R. Ebizuka and A. Yasunaga, “Rotor design for high efficiency induction motors for railway vehicle traction”, 2009 International Conference on Electrical Machines and Systems, Tokyo, 2009, pp. 1-4. doi: 10.1109/ICEMS.2009.5382961
CR  - [13]	D. Kim, J. Jung, J. Hong, K. Kim and C. Park, “A Study on the Design Process of Noise Reduction in Induction Motors”, IEEE Transactions on Magnetics, vol. 48, no.11, pp. 4638-4641, 2012. doi:10.1109/TMAG.2012.2197187
CR  - [14] C.Choudhury and N.K.Deshmukh, “A Novel Method for Reduction of Stray Loss in Induction Motor”, IEEE Transactions on Magnetics, doi:10.1109/PECI.2013.6506042
CR  - [15]	A.İ.Çanakoğlu and U.Özel, “Asenkron Motorlarda Uzay Harmoniklerin Yok Edilmesi İçin Yeni Bir Stator Oluk Tasarımı”, Afyon Kocatepe University Journal of Science and Engineering, doi:10.5578/fmbd.67809
CR  - [16]	J.Daut, K.Anayet, M.Irwanto, N.Gomesh, M.Muzhar, M.Asri and Syatirah, “Parameters Calculation of 5 Hp AC Induction Motor”, Proceedings of International Conference on Aplications and Design in Mechanical Engineering(ICADME), Batu Ferringhi, Penang, MALAYSIA, pp.12B(1-5), 2009.
UR  - https://doi.org/10.46578/humder.738310
L1  - https://dergipark.org.tr/tr/download/article-file/1106503
ER  -