Effect of Home Bleaching on the Color Differences of Polished and Glazed CAD-CAM Produced Monolithic Ceramics

Yıl 2024, , 337 - 346, 20.05.2024

Ayşe Buşra Taşar Bulut , Neşet Volkan Asar , Elif Su Çiçek , Merve Bankoğlu Güngör

https://doi.org/10.54617/adoklinikbilimler.1375521

Öz

Aim: The aim of this study was to evaluate the color differences of mechanically polished and glazed CAD-CAM produced monolithic ceramics after home bleaching.
Materials and Method: In this study; three different CAD-CAM ceramics (lithium disilicate, zirconia-reinforced lithium silicate, and monolithic zirconia) were prepared in 14x12x1 mm3 dimensions and divided into two subgroups as mechanical polishing and glazing (n=8). Afterwards, home bleaching agent containing 16% carbamide peroxide was applied to the specimen surfaces for 14 days (4 hours daily). The color parameters of the specimens were measured before and after the bleaching application and the values were recorded. The color difference values were calculated with two different formulas as ΔE00 and ΔEab. Results were statistically analyzed by using two-way ANOVA and Tukey HSD tests (P<0.05).
Results: According to the two-way ANOVA results, it was determined that material type and surface treatment factors were effective on the ΔE00 and ΔEab values and there was an interaction between the factors (P<0.05). The highest ΔE00 and ΔEab values were found in the monolithic zirconia group. ΔEab value was significantly lower in the glazed monolithic zirconia group than the mechanically polished monolithic zirconia group (P<0.05).
Conclusion: Ceramic type and surface finishing procedures affected the color difference values of lithium disilicate, zirconia-reinforced lithium silicate, and monolithic zirconia ceramics which were subjected to home bleaching; however, both color difference values were below the perceptible threshold values (<0.8 and 1.2) in the all experimental groups.

Anahtar Kelimeler

CAD-CAM, ceramics, color, tooth bleaching

Ev Tipi Beyazlatma İşleminin Farklı Yüzey Bitirme İşlemleri Uygulanan Monolitik CAD-CAM Seramiklerinin Renk Değişimine Etkisi

Öz

Amaç: Bu çalışmanın amacı mekanik polisaj ve glaze uygulanmış CAD-CAM seramiklerinde ev tipi beyazlatma işlemi sonrasında meydana gelen renk değişiminin değerlendirilmesidir.
Gereç ve Yöntem: Bu çalışmada; lityum disilikat, zirkonya katkılı lityum silikat ve monolitik zirkonya olmak üzere üç farklı CAD-CAM seramiğinden 14x12x1 mm3 boyutlarında hazırlanan örnekler; mekanik polisaj ve glaze olmak üzere iki alt gruba ayrıldı (n=8). Örnek yüzeylerine %16 karbamid peroksit içeren ev tipi beyazlatma ajanı 14 gün (günlük 4 saat) ara vermeden uygulandı. Örneklere ait renk parametreleri beyazlatma ajanı uygulamasından önce ve sonra ölçüldü. Renk değişimi değerleri iki farklı formülle (ΔE00 ve ΔEab) hesaplandı. Sonuçlar istatistik anlamlılık düzeyi P<0.05 alınarak, iki yönlü ANOVA ve Tukey çoklu karşılaştırma testleri ile analiz edildi.
Bulgular: İki yönlü ANOVA testi sonucuna göre farklı materyal ve yüzey işlemleri faktörlerinin ΔE00 ve ΔEab değerleri üzerinde etkili olduğu ve faktörler arasında etkileşim bulunduğu belirlendi (P<0.05). Mekanik polisaj işleminde, materyal grupları içerisinde en yüksek ΔE00 ve ΔEab değerleri monolitik zirkonya grubunda bulundu. ΔEab değerinin glaze uygulanmış monolitik zirkonya grubunda, mekanik polisaj uygulanmış monolitik zirkonya grubuna göre anlamlı olarak daha düşük olduğu belirlendi (P>0.05).
Sonuç: Ev tipi beyazlatma işlemi uygulanan lityum disilikat, zirkonya katkılı lityum silikat ve monolitik zirkonya seramiklerde seramik tipi ve yüzey bitirme işlemleri renk değişimi değerlerini etkilemektedir ancak bütün deney gruplarında her iki renk değişim değeri de (ΔE00 ve ΔEab) algılanabilir eşik değerlerinin altındadır (<0.8 ve 1.2).

Anahtar Kelimeler

CAD-CAM, diş beyazlatma, renk, seramikler

Kaynakça

• Deniz D, Aktaş G. Güncel zirkonya jenerasyonları: Klinik ipuçları. Acta Odontol Turc 2023;40:95-102.
• Gracis S, Thompson VP, Ferencz JL, Silva NR, Bonfante EA. A new classification system for all-ceramic and ceramic-like restorative materials. Int J Prosthodont 2015;28:227-35.
• Ziyad TA, Abu-Naba'a LA, Almohammed SN. Optical properties of CAD-CAM monolithic systems compared: three multi-layered zirconia and one lithium disilicate system. Heliyon 2021;7:e08151.
• Ülkü O, Cengiz S. Klinikte kullanılan CAD/CAM sistemlerinin güncel materyalleri. J Int dent Sci 2015;1:9-12.
• Zhang Y, Vardhaman S, Rodrigues C, Lawn B. A critical review of dental lithia-based glass–ceramics. J Dent Res 2023;102:245-53.
• Zarone F, Ruggiero G, Leone R, Breschi L, Leuci S, Sorrentino R. Zirconia-reinforced lithium silicate (ZLS) mechanical and biological properties: A literature review. J Dent 2021;109:103661.
• Alshali RZ, Alqahtani MA. The effect of home and in-office bleaching on microhardness and color of different CAD/CAM ceramic materials. Materials 2022;15:5948.
• De Geus J, Wambier L, Boing T, Loguercio A, Reis A. At-home bleaching with 10% vs more concentrated carbamide peroxide gels: a systematic review and meta-analysis. Oper Dent 2018;43:E210-E222.
• Al-Angari NS, Quwayhis S, Almayouf N, Meaigel S, Aldahash A, Al-Angari SS. Effect of staining and whitening systems on color stability of computer aided design/computer aided manufacturing lithium disilicate glass ceramic. The Saudi Dental Journal 2023;35:359-64.
• Razeen HM, Mahmoud AS, El-dessouky RA. Evaluation of color changes produced by different bleaching techniques on stained two different ceramic materials. Tanta Dental Journal 2023;20:275-80.
• Karakaya I, Cengiz‐Yanardag E. Changes in optical characteristics and surface topography of CAD/CAM materials after bleaching applications: an AFM evaluation. J Prosthodont 2020;29:226-36.
• Tavangar MS, Mousavipour E, Ansarifard E. The effect of bleaching on the optical and physical properties of externally stained monolithic zirconia. Clin Exp Dent Res 2021;7:861-7.
• Silva MdA, Davies R, Stewart B, DeVizio W, Tonholo J, da Silva Júnior JG, et al. Effect of whitening gels on the surface roughness of restorative materials in situ. Dent Mater 2006;22:919-24.
• Kara HB, Aykent F, Ozturk B. The effect of bleaching agents on the color stability of ceromer and porcelain restorative materials in vitro. Oper Dent 2012;38:E1-E8.
• Polydorou O, Mönting JS, Hellwig E, Auschill TM. Effect of in-office tooth bleaching on the microhardness of six dental esthetic restorative materials. Dent Mater 2007;23:153-8.
• Vanderlei AD, Passos SP, Salazar-Marocho SM, Pereira SM, Vásquez VZ, Bottino MA. Effect of bleaching agent on dental ceramics roughness. Acta Odontol Latinoam 2010;23:249-56.
• Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: A comprehensive review of clinical and research applications. J Esthet Restor Dent 2019;31:103-12.
• Ramos A, Peña R, Dovigo L, Pérez M, Fonseca R. Effect of Simulated Annual At-home Bleaching on Susceptibility to Staining, Translucency, and Whiteness Variations of Computer-aided Design and Computer-aided Manufacturing Monolithic Materials. Oper Dent 2023;48:404-15.
• Alkurt M, Duymus ZY, Yildiz Ş. How home bleaching agents affect the color and translucency of CAD/CAM monolithic zirconia materials. Dent Mater J 2022;41:511-9.
• Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Restor Dent 2015;27:S1-S9.
• Murat S, Batak B, Yilmaz D, Öztürk C. Effects of 16% carbamide peroxide on optical properties of thermally aged monolithic CAD-CAM glass ceramics with different surface treatments. Oper Dent 2023;48:176-85.
• Kurt M, Güngör MB, Nemli SK, Bal BT. Effects of glazing methods on the optical and surface properties of silicate ceramics. J Prosthodont Res 2020;64:202-9.
• Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent 2010;38:e57-e64.
• Meireles SS, Heckmann SS, Leida FL, Santos IS, Bona Á, Demarco FF. Efficacy and safety of 10% and 16% carbamide peroxide tooth-whitening gels: a randomized clinical trial. Oper Dent 2008;33:606-12.
• Basting RT, Amaral F, França F, Flório F. Clinical comparative study of the effectiveness of and tooth sensitivity to 10% and 20% carbamide peroxide home-use and 35% and 38% hydrogen peroxide in-office bleaching materials containing desensitizing agents. Oper Dent 2012;37:464-73.
• Alshali RZ, AlQahtani MA, Bukhary DM, Alzahrani MA, Alsoraihi SS, Alqahtani MA. The effect of bleaching on surface roughness and gloss of different CAD/CAM ceramic and hybrid ceramic materials. J Appl Biomater Funct Mater 2023;21:22808000231152566.
• Nikanjam S, Abbasi S, Khazaei S. Effect of different bleaching methods on optical behaviors of CAD/CAM ceramics. Avicenna Journal of Dental Research 2021;13,113-8.