E-CAMI/EPOKSİ KOMPOZİT BORULARIN DARBE CEVABINA VURUCU GEOMETRİSİNİN ETKİSİ
Abstract
Bu çalışmada filaman sarım yöntemiyle üretilmiş ±55° sarım açısına sahip 10 tabakalı E-camı/epoksi kompozit boruların düşük hızlı darbe cevabına vurucu geometrisinin etkisi deneysel olarak araştırılmıştır. V yatağı üzerine yerleştirilen kompozit boru numunelerine düşük hızlı darbe cihazı kullanılarak, 24 mm ve 12 mm çaplı yarı-küresel ve 120° piramit uca sahip vurucularla düşük enerjili darbe yapılmıştır. Düşük enerjili darbe deneyleri 5 J, 10 J ve 15 J enerji seviyelerinde yapılmıştır. Vurucu geometrisine ve enerji seviyesine bağlı olarak elde edilen kuvvet-zaman ve kuvvet yer değiştirme değişimleri incelenmiştir. Ayrıca farklı geometrilere sahip vurucuların kompozit boru numunesinde meydana getirmiş olduğu hasarlar haritalanmış, vurucu geometrisine bağlı olarak değişen hasar alanları tetkik edilmiştir.
Keywords
Kompozit boru , Darbe cevabı, Vurucu geometrisi, Hasar mekanizması
References
- Kara M, Düşük Hızlı Darbe Sonrası Yama İle Tamir Edilmiş Filaman Sarım CTP Boruların İç Basınç Altındaki Hasar Davranışı, Doktora Tezi Selçuk Üniversitesi Fen Bilimleri Enstitüsü, 2012, Konya.
- Lee SM, Cheon JS, Im YT. Experimental and numerical study of the impact behavior of SMC plates Compos. Struct., 1999; 47, 551–561
- Kim SJ, Goo NS. Dynamic contact responses of laminated composite plates according to the impactor’s shapes, Comput. Struct., 1997; 65 (1), 83–90.
- Zhou GJC, Lloyd J. McGuirk J. Experimental evaluation of geometric factors affecting damage mechanisms in carbon/epoxy plates, Compos. Part A: Appl. Sci. Manuf., 2001; 32, 71–84.
- G. Zhou, Damage mechanisms in composite laminates impacted by a flat-ended impactor, Compos. Sci. Technol., 1995; 54, 267–273.
- Mines RAW, Roach AM. N. Jones, High velocity perforation behaviour or polymer composite laminates, Int. J. Impact Eng., 1999; 22, 561–588 [7] Uyaner M and Kara M. Experimental study of the impact behavior of laminated composites stricken by sharp impactors. Sci Eng Compos Mater, 2012; 19, 307-313.
- H.N. Dhakal, Z.Y. Zhang, N. Bennett, P.N.B. Reis, Low-velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites: Influence of impactor geometry and impact velocity, Compos. Struct., 2012; 94, 2756–2763. [9] Faizul YM, Ghani SA and Salleh J. Effect of impactor shapes and yarn frictional effects on plain woven fabric puncture simulation. Textile Research Journal, 2014; 0040517513515319.
- Icten BM, Kıral BG and Deniz ME Impactor diameter effect on low velocity impact response of woven glass epoxy composite plates. Composites Part B: Engineering, 2013; 50 325-332.
- Abrate, S. Impact on composite structures. Cambridge, Cambridge University Press., 1998, 135-160. [12] ASTM D 7136/D 7136M 07 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event 2.