Research Article

Optical fiber bending sensor based on speckle pattern imaging

Volume: 66 Number: 2 December 11, 2024
EN

Optical fiber bending sensor based on speckle pattern imaging

Abstract

In this paper, we propose a new fiber bending sensor based on speckle pattern imaging. The design and implementation of the sensor are demonstrated by simulated studies. The speckle pattern imaging technique by using a multimode fiber can offer high spatial resolution. In this study, we showed that the bending sensor responds very sensitively by using the correlation of the images. The fiber sensing part consists of a curve in a form similar to the S structure. We reached a sensitivity of 0.0295 μm-1 by bending the fiber only 60°. Sensitivity can be further increased by reducing the bending diameter or creating a full loop.

Keywords

Supporting Institution

TUBITAK

Project Number

1919B012219546

Thanks

This research was supported by the Scientific and Technological Research Council of Turkey (TUBITAK 2209-A Program in 2023).

References

  1. Gao, H., Hu, H., Zhao, Y., Li, J., Lei, M., Zhang, Y., Highly-sensitive optical fiber temperature sensors based on PDMS/silica hybrid fiber structures, Sens. Actuators A Phys., 284 (2018), 22-27, https://doi.org/10.1016/j.sna.2018.10.011.
  2. Su, H., Zhang, Y., Ma, K., Zhao, Y., Wang, J., High-temperature sensor based on suspended-core microstructured optical fiber, Opt. Express, 27 (2019), 20156, https://doi.org/10.1364/OE.27.020156.
  3. Li, M., Gong, Y., Yin, J., Li, W., Shao, Y., Cong, A., Huang, G., Highly-sensitive and wide-range temperature sensor based on polymer-filled micro-cavity in fibre Bragg grating by temperature segmentation, Optik, 245 (2021), 167707.
  4. Sun, X., Zhang, L., Zeng, L., Hu, Y., Duan, J., Micro-bending sensing based on single mode fiber spliced multimode fiber Bragg grating structure, Opt. Commun., 505 (2022), 127513, https://doi.org/10.1016/j.optcom.2021.127513.
  5. Perez-Herrera, R.A., Andre, R.M., Silva, S.F. et al., Simultaneous measurement of strain and temperature based on clover microstructured fiber loop mirror, Measurement, 65 (2015), 50-53, https://doi.org/10.1016/j.measurement.2014.12.052.
  6. Bilsel, M., Navruz, I., Tapered optical fiber sensor for discrimination of strain and temperature, Advances in Electrical and Electronic Eng., 18 (2020), 50-56.
  7. Kissinger, T., Correia, R., Charrett, T. O. H., James, S. W., Tatam, R. P., Fiber segment interferometry for dynamic strain measurements, J. Light. Technol., 34 (2016), 4620-4626, https://doi.org/10.1109/JLT.2016.2530940.
  8. Sazio, P. J. A., Microstructured optical fibers as high-pressure microfluidic reactors, Science, 311 (2006), 1583-1586.

Details

Primary Language

English

Subjects

Photonic and Electro-Optical Devices, Sensors and Systems (Excl. Communications) , Optical Fibre Communication Systems and Technologies

Journal Section

Research Article

Publication Date

December 11, 2024

Submission Date

April 2, 2024

Acceptance Date

May 22, 2024

Published in Issue

Year 1970 Volume: 66 Number: 2

APA
Navruz, İ., Dilsiz, C., Ortak, E. S., & Boyraz, S. N. (2024). Optical fiber bending sensor based on speckle pattern imaging. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering, 66(2), 201-213. https://doi.org/10.33769/aupse.1461078
AMA
1.Navruz İ, Dilsiz C, Ortak ES, Boyraz SN. Optical fiber bending sensor based on speckle pattern imaging. Commun.Fac.Sci.Univ.Ank.Series A2-A3: Phys.Sci. and Eng. 2024;66(2):201-213. doi:10.33769/aupse.1461078
Chicago
Navruz, İsa, Ceren Dilsiz, Eylül Sevim Ortak, and Sevde Nur Boyraz. 2024. “Optical Fiber Bending Sensor Based on Speckle Pattern Imaging”. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering 66 (2): 201-13. https://doi.org/10.33769/aupse.1461078.
EndNote
Navruz İ, Dilsiz C, Ortak ES, Boyraz SN (December 1, 2024) Optical fiber bending sensor based on speckle pattern imaging. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering 66 2 201–213.
IEEE
[1]İ. Navruz, C. Dilsiz, E. S. Ortak, and S. N. Boyraz, “Optical fiber bending sensor based on speckle pattern imaging”, Commun.Fac.Sci.Univ.Ank.Series A2-A3: Phys.Sci. and Eng., vol. 66, no. 2, pp. 201–213, Dec. 2024, doi: 10.33769/aupse.1461078.
ISNAD
Navruz, İsa - Dilsiz, Ceren - Ortak, Eylül Sevim - Boyraz, Sevde Nur. “Optical Fiber Bending Sensor Based on Speckle Pattern Imaging”. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering 66/2 (December 1, 2024): 201-213. https://doi.org/10.33769/aupse.1461078.
JAMA
1.Navruz İ, Dilsiz C, Ortak ES, Boyraz SN. Optical fiber bending sensor based on speckle pattern imaging. Commun.Fac.Sci.Univ.Ank.Series A2-A3: Phys.Sci. and Eng. 2024;66:201–213.
MLA
Navruz, İsa, et al. “Optical Fiber Bending Sensor Based on Speckle Pattern Imaging”. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering, vol. 66, no. 2, Dec. 2024, pp. 201-13, doi:10.33769/aupse.1461078.
Vancouver
1.İsa Navruz, Ceren Dilsiz, Eylül Sevim Ortak, Sevde Nur Boyraz. Optical fiber bending sensor based on speckle pattern imaging. Commun.Fac.Sci.Univ.Ank.Series A2-A3: Phys.Sci. and Eng. 2024 Dec. 1;66(2):201-13. doi:10.33769/aupse.1461078

Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons License