Balkan Journal of Electrical and Computer Engineering

2147-284X 2147-284X

MUSA YILMAZ

10.17694/bajece.410219

Analyzing High Efficiency Asynchronous Motors Using Scalar Control Technique

Uzun

Hasan

Akar

Onur

Demırcı

Alpaslan

Akuner

M. CANER

Terzi

UMIT K:

04 01 2018

6 23 26 09 13 2017 01 08 2018

2013

Balkan Journal of Electrical and Computer Engineering

In industry, more than half of the totalelectrical energy produced in developed countries is converted into mechanicalenergy by electric motors. The usage rate of asynchronous motors is estimatedto be 90% of all electric motors. For these motors, an improvement inefficiency may result in huge savings. These electric motors which haveminimized losses can be improved with speed control drives to be more efficientin terms of energy consumption and performance. In speed control drives of asynchronousmotors widely used in industry; scalar, vector control and direct torquecontrol are used. In this study, in a Matlab/Simulink environment,high efficiency and standard asynchronous motors with the same characteristicswere driven with scalar control technique and the simulations were compared indetail. From the point of view of both speed control performance and energysaving, it observed that high efficiency motors have more advantages. 

Asynchronous motor High Efficiency Motors Speed Control Scalar Control

[1] H. Uzun, “Yüksek Verimli ve Standart Asenkron Motorların Farklı Hız Kontrol Yöntemleri Kullanılarak Karşılaştırılması”, Master Thesis, Marmara University, Istanbul, Turkey, 2013.

[2] H. Uzun, M. C. Aküner, İ. Temiz, & E. Hüner, (2012). “Comparison of high efficiency and standard induction motors with different speed control methods”, Energy Education Science and Technology Part A Energy Science and Research. Sayı SI-1. Cilt 30 sf 533-538.

[3] C. Tekin, “Yuksek Verimli Asenkron Motorların Analizi” Master Thesis, Marmara University, Istanbul, Turkey, 2008 [in Turkish].

[4] F. Akova, “Elektrik Motor Sistemlerinde Enerji Verimliligine Bakis. Verimli Endustriyel Komponentler Ic ve Dis Tic Ltd Sti” [Online]. Available: www.uevf.com.tr/uevf1/sunumlar/ot08-05.doc. [Accessed: August 16, 2011]. [in Turkish].

[5] E. Goren, “Elektrik Motoru ve Hiz Kontrol Sistemleri ile Enerji Verimliligi. Siemens San ve Tic AS” [Online]. Available: www.uevf.com.tr/uevf1/sunumlar/ot08-01.doc, [Accesses: August 16, 2011] [in Turkish].

[6] MK .SariogIu, M . Gokasan, S. Bogosyarı, “Asenkron Makinalar ve Kontrolu”, Birsen Print House, Istanbul, 2003 [in Turkish]. [7] B. Widell, D. Danfoss, L. Park, “High Efficiency Motors And Nuisance Starting Trips”, Illinois, USA, 2007.

[8] J. Pyrhonen, J. Haataja, K. Luostarinen, “High Efficient Induction Motors”, Lappeenranta University of Technology.

[9] [Online].Available:www.energysc.org/energy_tips.html high_efficiency_MOTORS.PDF, [ACCESSES: AUGUST 10, 2011].

[10] ABB. ACS 800 Programlama Kilavuzu [in Turkish].

[11] S. Dursun, “Energy utilization and energy efficiency”, Ener Educ Sci Tech 2005;15:59−70.

[12] N. Ozturk, “Yumusak Anahtarlamalı Asenkron Motorun Dolaylı Vektor Denetiminin Gerceklestirilmesi”, PhD Thesis, Gazi University, Ankara, Turkey, 2006.

[13] A. Saygin, “Asenkron Motor Hiz Kontrolunun Matris Konverter ile Hizinin Denetlenmesi”, PhD. Thesis, Gazi University, Ankara, Turkey, 2004 [in Turkish].

[14] OA. Karaman, “Dogrudan Moment Kontrollu Motor Surucu Sisteminin Incelenmesi”, Master Thesis, Firat University Elazig, Turkey, 2010 [in Turkish].

[15] MK. SariogIu, M. Gokasan, S. Bogosyari, “Asenkron Makinalar ve Kontrolu”, Birsen Print House, Istanbul, 2003 [in Turkish].

[16] A. Boglietti, A. Cavagnino, M. Lazzari, M. Pastorelli, “International Standards for the Induction Motor Efficiency Evaluation: A Critical Analysis of the Stray-Load Loss Determination”, 2003.

[17] J. Lepka, P. Stekl, “3-Phase AC Induction Motor Vector Control Using a 56F80x, 56F8100 or 56F8300 Device. Design of Motor Control Application”, 2005.

[18] A. Hazzab, M. Rahli, B. Kamli, B. Mazari, “Direct Field-Oriented Control Design using Backstepping Technique for Induction Motor Speed Control”, University of Sciences and Technology of Oran, Algeria, 2009.