Comprehensive Analysis of Grounding System in High Voltage Substation Using Soil Investigation Report

Öz

This study focuses on the design and analysis of grounding systems in high voltage substation. Thus, it aims to contribute to the development of safer and techno-economic design of grounding systems. In the study, the ground survey report data conducted at the transformer center site, which is a high voltage facility belonging to the Turkish Electricity Transmission Company (TEIAS), and the soil specific resistance data measured with the Wenner and Schlumberger methods at the same site were obtained. These data were used in analytical calculations in accordance with the IEEE Std 80-2013 standard and in the Current Distribution Electromagnetic Field Grounding Soil Structure Analysis Software (CDEGS). In addition, ground impedance, step and touch voltages were measured at the installed substation using the Fall of Potential Method (FPM) specified in IEEE Std 80-2013 standard. These measured values were compared with the analytical calculations and CDEGS software analysis results and a comprehensive evaluation was made.

Anahtar Kelimeler

• CDEGS software
• fall of potential method
• Wenner method
• Schlumberger method
• ground impedance
• soil resistivity

Kaynakça

1. [1] R. K. Patel, E. L. S. (2020). Fault Analysis And Simulation For Grounding Systems. Electric Power Systems Research, 178, 118–126.
2. [2] Gouglidis, A., Green, B., Hutchison, D., Alshawish, A., & De Meer, H. (2018). Surveillance And Security: Protecting Electricity Utilities And Other Critical Infrastructures. Energy Informatics, 1(1), 1–24.
3. [3] Shakya, S., Inazumi, S., & Nontananandh, S. (2022). Potential Of Computer-Aided Engineering In The Design Of Ground-Improvement Technologies. Applied Sciences 2022, Vol. 12, Page 9675, 12(19), 9675.
4. [4] Kosc, D., & Hamer, P. S. (2002). Grounding Practices - A System-Wide, Systematic Approach. Record Of Conference Papers - Annual Petroleum And Chemical Industry Conference, 301–312
5. [5] Doughney, J, & Vang, L. (2020). Electrical Grounding And Bonding Per Nec: Understanding Correct Grounding And Bonding Design And Construction Is Crucial For Proper Electrical System Operation And Personnel Safety. Consulting Specifying Engineer,57(11),12–17.
6. [6] TS 13817, Methods of grounding resistance measuring methods and evaluation of the results in electrical systems, Turkish Standards Institute, 2018.
7. [7] Vankamble, S. S., & Dalvi, R. S. (2023). Investigation Of Geotechnical Factors Affecting Electrical Resistivity Of Soil. Lecture Notes In Civil Engineering, 280, 95–102.
8. [8] Gilbert, G. (2011). High Voltage Grounding Systems. University Of Waterloo. Http://Hdl.Handle.Net/10012/5789

9. [9] Nayak, M. R. (1985a). A Review Of Grounding And Shielding Techniques In Industrial Data Acquisition Systems. Iete Journal Of Education, 26(3), 85–91.
10. [10] Ahadi, M. H. (2024). Integrating Machine Learning Into Energy Systems: A Techno-Economic Framework For Enhancing Grid Efficiency And Reliability. Unified Vision For A Sustainable Future, 87–105.
11. [11] Permal, N., Osman, M., Ariffin, A. M., Boopalan, N., & Abidin Ab Kadir, M. Z. (2021). Optimization Of Substation Grounding Grid Design For Horizontal And Vertical Multilayer And Uniform Soil Condition Using Simulated Annealing Method. Plos One, 16(9), E0256298.
12. [12] L. T. Nguyen, B. R. J. (2023). Environmental Conditions And Their Effect On Grounding System Performance: A Simulation Study. Journal Of Electrical Engineering & Technology, 18, 342–351.
13. [13] M. A. Green, P. T. D. (2021). Evaluation Of Simulation Results For Grounding System Performance. Journal Of Engineering Research, 59, 892–901.
14. [14] S. R. Kumar, A. M. J. (2021). Environmental Impacts On Grounding System Performance: Modeling And Analysis. Environmental Science & Technology, 55, 254–263
15. [15] P. W. Lee, M. G. P. (2019). Electrical Modeling Of Grounding Systems Using Computational Methods. IEEE Transactions On Power Delivery, 34, 1125–1133.
16. [16] H. L. Thomas, J. B. A. (2016). Geometric Modeling For Electrical Grounding Systems. Journal Of Computational Physics, 321, 56–65.
17. [17] IEEE Std 80-2013, IEEE guide for safety in AC substation grounding, IEEE, 2013.