Research Article

Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator

Volume: 14 October 30, 2026
EN TR

Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator

Abstract

In this study, a multi-view RGB-D-based three-dimensional point cloud acquisition system is developed using a six-degree-of-freedom robotic manipulator within the Webots simulation environment. The robotic manipulator is actuated along semicircular arcs to position the RGB-D camera at predefined viewing angles, enabling simultaneous acquisition of color and depth images at each waypoint. Two mutually orthogonal semicircular scanning trajectories are employed to increase surface coverage, while the camera optical axis is continuously directed toward the object center throughout the scan. At each stable waypoint, RGB-D data and camera pose information are synchronously recorded. The resulting point cloud provides a geometrically consistent representation of the scanned object without requiring an additional point-cloud registration procedure. The results were first obtained for n = 7 waypoints per semicircular trajectory, and the corresponding error statistics were analyzed in detail. This analysis showed that the median distance between the point cloud generated using the ground-truth poses and the reference surface remained on the order of micrometers, indicating that the fusion pipeline introduced no measurable geometric error beyond that contained in the provided pose information. When the same frames were fused using the commanded poses, the mean surface error increased to 0.45 mm, corresponding to approximately 0.62 times the mean pose position error. Therefore, the scanning accuracy is determined by the positioning performance of the manipulator rather than the sensor model. Subsequently, the same trajectory geometry was rescanned with n=37 waypoints to evaluate the effect of sampling density comparatively. The comparison showed that increasing the number of waypoints reduced the median point spacing and improved cross-trajectory consistency approximately in proportion to the square root of the point density, while leaving the pose errors and geometric accuracy essentially unchanged.

Keywords

Supporting Institution

TÜBİTAK

Project Number

123E684

Thanks

The authors thank TÜBİTAK for its support.

References

  1. [1] Fei, B., Xu, J., Li, Y., Yang, W., Zhou, Q., Liu, L., Luo, T., & He, Y. (2026). Self-Supervised Learning for Pre-Training 3D Point Clouds: A Survey. Computational Visual Media, 12(3),509-573. https://doi.org/10.26599/CVM.2025.9450514
  2. [2] Imran, M. M., Kim, Y., Jung, G., De Silva, L. C., Suh, J.-H., Abas, P. E., & Kim, Y. B. (2023). In-Situ Process Monitoring and Defects Detection Based on Geometrical Topography With Streaming Point Cloud Processing in Directed Energy Deposition. IEEE Access, 11, 131319- 131337. https://doi.org/10.1109/ACCESS.2023.3335130
  3. [3] Tychola, K.A., Vrochidou, E., & Papakostas, G.A. (2024). Deep learning based computer vision under the prism of 3D point clouds: a systematic review. The Visual Computer, 40, 8287–8329. https://doi.org/10.1007/s00371-023-03237-7
  4. [4] Wang, C., Wang, C., Li, W., & Wang, H. (2021). A brief survey on RGB-D semantic segmentation using deep learning. Displays, 70, 102080. https://doi.org/10.1016/j.displa.2021.102080
  5. [5] Xu, Y., Tong, X., & Stilla, U. (2021). Voxel-based representation of 3D point clouds: Methods, applications, and its potential use in the construction industry. Automation in Construction, 126, 103675. https://doi.org/10.1016/j.autcon.2021.103675
  6. [6] Komori, J., & Hotta, K. (2019, December). AB-PointNet for 3D Point Cloud Recognition. 2019 Digital Image Computing: Techniques and Applications (DICTA) (pp. 1- 6). IEEE. https://doi.org/10.1109/DICTA47822.2019.8945926
  7. [7] Luo, K., Yu, H., Chen, X., Yang, Z., Wang, J., Cheng, P., & Mian, A. (2024). 3D point cloud-based place recognition: a survey. Artificial Intelligence Review, 57. https://doi.org/10.1007/s10462-024-10713-6
  8. [8] Liu, Y., Yuan, H., Zhao, X., Fan, C., & Cheng, M. (2023). Fast reconstruction method of three-dimension model based on dual RGB-D cameras for peanut plant. Plant Methods, 19. https://doi.org/10.1186/s13007-023-00998-z

Details

Primary Language

English

Subjects

Software Architecture, Electrical Engineering (Other)

Journal Section

Research Article

Publication Date

October 30, 2026

Submission Date

September 24, 2026

Acceptance Date

October 23, 2026

Published in Issue

Year 2026 Volume: 14

APA
Boztaş, G., Çalik, M. F., & Pirinççi, N. (2026). Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator. Balkan Journal of Electrical and Computer Engineering, 14, 334-344. https://doi.org/10.17694/bajece.2047162
AMA
1.Boztaş G, Çalik MF, Pirinççi N. Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator. Balkan Journal of Electrical and Computer Engineering. 2026;14:334-344. doi:10.17694/bajece.2047162
Chicago
Boztaş, Güllü, Muhammed Furkan Çalik, and Neslihan Pirinççi. 2026. “Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator”. Balkan Journal of Electrical and Computer Engineering 14 (October): 334-44. https://doi.org/10.17694/bajece.2047162.
EndNote
Boztaş G, Çalik MF, Pirinççi N (October 30, 2026) Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator. Balkan Journal of Electrical and Computer Engineering 14 334–344.
IEEE
[1]G. Boztaş, M. F. Çalik, and N. Pirinççi, “Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator”, Balkan Journal of Electrical and Computer Engineering, vol. 14, pp. 334–344, Oct. 2026, doi: 10.17694/bajece.2047162.
ISNAD
Boztaş, Güllü - Çalik, Muhammed Furkan - Pirinççi, Neslihan. “Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator”. Balkan Journal of Electrical and Computer Engineering 14 (October 30, 2026): 334-344. https://doi.org/10.17694/bajece.2047162.
JAMA
1.Boztaş G, Çalik MF, Pirinççi N. Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator. Balkan Journal of Electrical and Computer Engineering. 2026;14:334–344.
MLA
Boztaş, Güllü, et al. “Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator”. Balkan Journal of Electrical and Computer Engineering, vol. 14, Oct. 2026, pp. 334-4, doi:10.17694/bajece.2047162.
Vancouver
1.Güllü Boztaş, Muhammed Furkan Çalik, Neslihan Pirinççi. Multi-View RGB-D 3D Point Cloud Reconstruction Using a Robotic Manipulator. Balkan Journal of Electrical and Computer Engineering. 2026 Oct. 30;14:334-4. doi:10.17694/bajece.2047162

All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı