Mobile communication
has become an important part of our daily lives for voice communication, data
sharing and access over the Internet. Mobile communication is an open network,
so maintaining the privacy and reliability of data has always been anxiety. The
reliability of the data against channel noise can be achieved by various error
correction codes. The primary purpose of the channel coding process is to
reduce the effect of disturbing influences to the minimum level. In this way,
the receiver will be able to receive the data sent by the transmitter with the
minimum error. In this research paper, it is required to acquire two audio
signals with 8 bits of resolution and 8 kHz sampling frequency for 5 seconds in
MATLAB. In the first part of this study, Reed-Solomon (RS) Coding Method was
used to transmit two audio data recorded in .wav format with minimum error.
Binary Phase Shift Keying (BPSK) modulation was used as the modulation
method. The Bit Error Rate (BER)
performance curve was plotted and the difference between the original and the
received signal was observed. According to the BER performance curve, as the
signal to noise ratio increases, less false data is received at the receiver.
In the second part of the study, four wavelet transform families at different
levels were applied to the audio signal, and the performances of these classes
were compared.
Primary Language | English |
---|---|
Journal Section | Araştırma Articlessi |
Authors | |
Publication Date | April 1, 2018 |
Published in Issue | Year 2018 Volume: 6 |
All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.