Yıl 2019, Cilt 9 , Sayı 1, Sayfalar 8 - 10 2019-06-28

This study examines the design and production processes of a small molar tooth produced with a 3D printer. When designing the exercises, polygons and parabolic forms were used as output points. These forms, which are rendered in three dimensions in the computer environment, are formed taking into consideration the structural characteristics of the production material. PLA (Polylactic Acid ) material is used in this design which is produced in three dimensional printer by FDM (Fused Deposition Modeling)  method. In the scope of the study, the conditions experienced in the design of the material used were mentioned and the material mistake was given during printing. The different effects of the commands used in the design process on the production surfaces, as well as voluntary or involuntary faults, are very important in the formation of some deformations and are caused by the plastic nature of the material. In addition, the effects of PLA on the surface of the faults are investigated. However, different methods applied in the production of sole parts and surfaces have been evaluated.
3D Printing, Dentistry, Design
  • 1. Bell, A., Ayoub, A.F., Siebert, P.: Assessment of the accuracy of a three-dimensional imaging system for archiving dental study models. J. Orthod. 30, 219–223 (2003)
  • 2. Quimby, M.L., Vig, K.W.L., Rashid, R.G., Firestone, A.R.: The accuracy and reliability of measurements made on computer-based digital models. Angle Orthod. 74, 298–303 (2004)
  • 3. 3B da basılan küçük azı dişin uygulama videoları
  • 4. Garino, F., Garino, G.B.: Comparison of dental archmeasurements between stone and digital dental casts. World J. Orthod. 3, 250– 254 (2002) 5. Martinez, E. H. V., Can, Emre. (2016). Bilgisayar Destekli Seramik Üretim Yöntemi Olarak Üç Boyutlu Yazıcılar ve Günümüz Koşullarında Uygulama Örneği. Anadolu Üniversitesi Sanat & Tasarım Dergisi, 6(1),1-15.
  • 6. Davendorf, L. , Ryokai, K. “Beingthe Machine: ReconfiguringAgencyand Control in HybridFabrication” Digital&MaterialsFabrication, CHI 2015, Crossings, Seoul, Korea.
  • 6. Life of 3D Printer, Power point demo, Karabuk University,Department of Endustrıal Design Engineering-2015
  • 7. https://www.youtube.com/watch?v=XLaeOQa0APw
Birincil Dil en
Konular Fen
Bölüm Articles
Yazarlar

Yazar: Bekir Cirak (Sorumlu Yazar)
Ülke: Turkey


Tarihler

Yayımlanma Tarihi : 28 Haziran 2019

Bibtex @araştırma makalesi { beuscitech433028, journal = {Bitlis Eren University Journal of Science and Technology}, issn = {}, eissn = {2146-7706}, address = {}, publisher = {Bitlis Eren Üniversitesi}, year = {2019}, volume = {9}, pages = {8 - 10}, doi = {10.17678/beuscitech.433028}, title = {An Examination of 3D Printing in Dentistry - A Study}, key = {cite}, author = {Cirak, Bekir} }
APA Cirak, B . (2019). An Examination of 3D Printing in Dentistry - A Study. Bitlis Eren University Journal of Science and Technology , 9 (1) , 8-10 . DOI: 10.17678/beuscitech.433028
MLA Cirak, B . "An Examination of 3D Printing in Dentistry - A Study". Bitlis Eren University Journal of Science and Technology 9 (2019 ): 8-10 <https://dergipark.org.tr/tr/pub/beuscitech/issue/46431/433028>
Chicago Cirak, B . "An Examination of 3D Printing in Dentistry - A Study". Bitlis Eren University Journal of Science and Technology 9 (2019 ): 8-10
RIS TY - JOUR T1 - An Examination of 3D Printing in Dentistry - A Study AU - Bekir Cirak Y1 - 2019 PY - 2019 N1 - doi: 10.17678/beuscitech.433028 DO - 10.17678/beuscitech.433028 T2 - Bitlis Eren University Journal of Science and Technology JF - Journal JO - JOR SP - 8 EP - 10 VL - 9 IS - 1 SN - -2146-7706 M3 - doi: 10.17678/beuscitech.433028 UR - https://doi.org/10.17678/beuscitech.433028 Y2 - 2019 ER -
EndNote %0 Bitlis Eren University Journal of Science and Technology An Examination of 3D Printing in Dentistry - A Study %A Bekir Cirak %T An Examination of 3D Printing in Dentistry - A Study %D 2019 %J Bitlis Eren University Journal of Science and Technology %P -2146-7706 %V 9 %N 1 %R doi: 10.17678/beuscitech.433028 %U 10.17678/beuscitech.433028
ISNAD Cirak, Bekir . "An Examination of 3D Printing in Dentistry - A Study". Bitlis Eren University Journal of Science and Technology 9 / 1 (Haziran 2019): 8-10 . https://doi.org/10.17678/beuscitech.433028
AMA Cirak B . An Examination of 3D Printing in Dentistry - A Study. Bitlis Eren University Journal of Science and Technology. 2019; 9(1): 8-10.
Vancouver Cirak B . An Examination of 3D Printing in Dentistry - A Study. Bitlis Eren University Journal of Science and Technology. 2019; 9(1): 10-8.