Exergo-environmental sustainability assessments of organic Rankine cycle plants powered by a typical abandoned oil well

Year 2024, Volume: 14 Issue: 2, 75 - 102, 26.12.2024

Larry Orobome Agberegha , Joseph Oyekale

https://doi.org/10.17678/beuscitech.1472921

Abstract

Economic and technical factors often force players in the oil and gas sectors to abandon oil wells with significant but minimal energy contents. To promote energy efficiency, efforts are ongoing to explore viable means of recovering such residual energy, basically as geotherms, for power generation. However, there are sparse studies in the literature that assess the exergo-environmental sustainability potentials of power generation from ORC using abandoned oil wells as the primary energy source, thereby necessitating this study.
The exergetic sustainability and exergo-environmental performance of non-recuperative and recuperative organic Rankine cycle (ORC) plants were assessed in this study for the production of electricity from abandoned oil wells. The geomechanical properties of a typical oil well in Nigeria were employed as inputs into an established COMSOL model to determine the thermal profile of the heat source. For the ORC plant, the mass, energy, and exergy balance equations defined by the Thermodynamics laws were implemented in MATLAB. Also, MATLAB was adopted for computing the exergetic sustainability and exergo-environmental metrics for the individual components and the entire system.
Results showed that the condenser exhibited the least exergo-environmental sustainability for both ORC schemes assessed, meaning that it contributed the most to energy wastages among the system components. Furthermore, results showed that the exergo-environmental impact rates of the condenser are highest in both cases. Generally, results showed that the inclusion of a recuperator would improve the exergy-based environmental sustainability of the ORC plant. Specifically, the overall rate of exergo-environmental impact would decrease from around 86 Pt/h to about 76 Pt/h, amounting to approximately 13% decrease.

Keywords

Abandoned oil well retrofit, Organic Rankine Cycle, Energy Efficiency, Sustainable Energy System, Exergetic Sustainability, Exergo-environmental Analysis

References

• A. A. Kassem, S. Sen, A. E. Radwan, W. K. Abdelghany, and M. Abioui, “Effect of Depletion and Fluid Injection in the Mesozoic and Paleozoic Sandstone Reservoirs of the October Oil Field, Central Gulf of Suez Basin: Implications on Drilling, Production and Reservoir Stability,” Natural Resources Research, vol. 30, no. 3, pp. 2587–2606, 2021, doi: 10.1007/s11053-021-09830-8.
• S. Jiang, Y. Li, F. Wang, H. Sun, H. Wang, and Z. Yao, “Review article A state-of-the-art review of CO 2 enhanced oil recovery as a promising technology to achieve carbon neutrality in China,” Environ Res, vol. 210, no. February, p. 112986, 2022, doi: 10.1016/j.envres.2022.112986.
• A. Talebi, A. Hasan-zadeh, Y. Kazemzadeh, and M. Riazi, “Journal of Petroleum Science and Engineering A review on the application of carbonated water injection for EOR purposes: Opportunities and challenges,” J Pet Sci Eng, vol. 214, no. March, p. 110481, 2022, doi: 10.1016/j.petrol.2022.110481.
• S. A. C. Natalya, G. T. M. Kadja, N. J. Azhari, M. Khalil, and A. T. N. Fajar, “FlatChem Two-dimensional (2D) nanomaterials for enhanced oil recovery ( EOR ): A review,” FlatChem, vol. 34, no. June, p. 100383, 2022, doi: 10.1016/j.flatc.2022.100383.
• D. S. E. Wiktorski and M. R. T. A. Basmoen, “Review and investigations on geothermal energy extraction from abandoned petroleum wells,” J Pet Explor Prod Technol, vol. 9, no. 2, pp. 1135–1147, 2019, doi: 10.1007/s13202-018-0535-3.
• J. Oyekale and E. Emagbetere, “19 - Pragmatic steps to the revitalization of abandoned oil and gas wells for geothermal applications,” Y. Noorollahi, M. N. Naseer, and M. M. B. T.-U. of T. P. of A. W. Siddiqi, Eds., Academic Press, 2022, pp. 389–403. doi: https://doi.org/10.1016/B978-0-323-90616-6.00019-1.
• B. F. Tchanche, Gr. Lambrinos, A. Frangoudakis, and G. Papadakis, “Low-grade heat conversion into power using organic Rankine cycles – A review of various applications,” Renewable and Sustainable Energy Reviews, vol. 15, no. 8, pp. 3963–3979, Oct. 2011, doi: 10.1016/J.RSER.2011.07.024.
• B.-S. Park, M. Usman, M. Imran, and A. Pesyridis, “Review of Organic Rankine Cycle experimental data trends,” Energy Convers Manag, vol. 173, pp. 679–691, Oct. 2018, doi: 10.1016/J.ENCONMAN.2018.07.097.
• B. Ebrahimpour, P. Hajialigol, M. Boroushaki, and M. Behshad, “Modeling and techno economic study of a solar reverse osmosis desalination plant,” International Journal of Environmental Science and Technology, no. 0123456789, 2022, doi: 10.1007/s13762-022-04099-7.
• L. O. Agberegha et al., “Investigation of a Hybridized Cascade Trigeneration Cycle Combined with a District Heating and Air Conditioning System Using Vapour Absorption Refrigeration Cooling: Energy and Exergy Assessments,” Energies (Basel), vol. 17, no. 6, Mar. 2024, doi: 10.3390/en17061295.
• M. Ennio and M. Astolfi, Organic Rankine Cycle (ORC) Power Systems: Technologies and Applications. 2016.
• O. İ. M. M. Mohammedsalih and B. G. B. Kılıç, “Experimental investigation of low temperature organic Rankine cycle using waste heat from gas turbine bearings for different conditions,” pp. 1519–1530, 2022, doi: 10.1007/s13762-021-03172-x.
• Y. Le Nian and W. L. Cheng, “Insights into geothermal utilization of abandoned oil and gas wells,” Renewable and Sustainable Energy Reviews, vol. 87, no. November 2017, pp. 44–60, 2018, doi: 10.1016/j.rser.2018.02.004.
• Y. Yang, Y. Huo, W. Xia, X. Wang, P. Zhao, and Y. Dai, “Construction and preliminary test of a geothermal ORC system using geothermal resource from abandoned oil wells in the Huabei oil fi eld of China,” Energy, vol. 140, pp. 633–645, 2017, doi: 10.1016/j.energy.2017.09.013.
• K. Wang, B. Yuan, G. Ji, and X. Wu, “A comprehensive review of geothermal energy extraction and utilization in oilfields,” Sep. 01, 2018, Elsevier B.V. doi: 10.1016/j.petrol.2018.05.012.
• J. Patihk, D. Warner-Lall, D. Alexander, R. Maharaj, and D. Boodlal, “The optimization of a potential geothermal reservoir using abandoned wells: a case study for the forest reserve field in Trinidad,” J Pet Explor Prod Technol, vol. 12, no. 1, pp. 239–255, 2022, doi: 10.1007/s13202-021-01322-y.
• S. Gharibi, E. Mortezazadeh, S. Jalaledin, H. Aghcheh, and A. Vatani, “Feasibility study of geothermal heat extraction from abandoned oil wells using a U-tube heat exchanger,” Energy, vol. 153, pp. 554–567, 2018, doi: 10.1016/j.energy.2018.04.003.
• G. Li, “Organic Rankine cycle environmental impact investigation under various working fluids and heat domains concerning refrigerant leakage rates,” International Journal of Environmental Science and Technology, vol. 16, no. 1, pp. 431–450, 2019, doi: 10.1007/s13762-018-1686-y.
• A. Midilli and I. Dincer, “Development of some exergetic parameters for PEM fuel cells for measuring environmental impact and sustainability,” Int J Hydrogen Energy, vol. 34, no. 9, pp. 3858–3872, 2009, doi: 10.1016/j.ijhydene.2009.02.066.
• I. Dincer and M. A. Rosen, Exergy. Elsevier Ltd, 2013.
• J. Oyekale and E. Emagbetere, “Impacts of biomass hybridization on exergetic sustainability of a solar organic Rankine cycle power plant,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2022, doi: 10.1177/09544089221099881.
• L. Meyer, G. Tsatsaronis, J. Buchgeister, and L. Schebek, “Exergoenvironmental analysis for evaluation of the environmental impact of energy conversion systems,” Energy, vol. 34, no. 1, pp. 75–89, 2009, doi: 10.1016/j.energy.2008.07.018.
• G. Tsatsaronis and T. Morosuk, “A general exergy-based method for combining a cost analysis with an environmental impact analysis. Part II - Application to a cogeneration system,” in ASME International Mechanical Engineering Congress and Exposition, Proceedings, 2009, pp. 463–469. doi: 10.1115/IMECE2008-67219.
• K. Parham, H. Alimoradiyan, and M. Assadi, “Energy, exergy and environmental analysis of a novel combined system producing power, water and hydrogen,” Energy, vol. 134, pp. 882–892, Sep. 2017, doi: 10.1016/j.energy.2017.06.016.
• F. I. Abam, E. B. Ekwe, S. O. Effiom, M. C. Ndukwu, T. A. Briggs, and C. H. Kadurumba, “Optimum exergetic performance parameters and thermo-sustainability indicators of low-temperature modified organic Rankine cycles (ORCs),” Sustainable Energy Technologies and Assessments, vol. 30, no. October 2017, pp. 91–104, 2018, doi: 10.1016/j.seta.2018.09.001.
• F. I. Abam, E. B. Ekwe, S. O. Effiom, and M. C. Ndukwu, “A comparative performance analysis and thermo-sustainability indicators of modified low-heat organic Rankine cycles (ORCs): An exergy-based procedure,” Energy Reports, vol. 4, pp. 110–118, 2018, doi: 10.1016/j.egyr.2017.08.003.
• F. I. Abam, E. B. Ekwe, S. O. Effiom, and C. B. Afangideh, “Performance and thermo-sustainability analysis of non-hybrid organic Rankine cycles (ORCs) at varying heat source and evaporator conditions,” Australian Journal of Mechanical Engineering, vol. 16, no. 3, pp. 238–248, Sep. 2018, doi: 10.1080/14484846.2017.1373585.
• V. Adebayo, M. Abid, M. Adedeji, and T. A. Hussain Ratlamwala, “Energy, exergy and exergo-environmental impact assessment of a solid oxide fuel cell coupled with absorption chiller & cascaded closed loop ORC for multi-generation,” Int J Hydrogen Energy, vol. 47, no. 5, pp. 3248–3265, 2022, doi: 10.1016/j.ijhydene.2021.02.222.
• N. Nasruddin, I. Dwi Saputra, T. Mentari, A. Bardow, O. Marcelina, and S. Berlin, “Exergy, exergoeconomic, and exergoenvironmental optimization of the geothermal binary cycle power plant at Ampallas, West Sulawesi, Indonesia,” Thermal Science and Engineering Progress, vol. 19, no. November 2019, p. 100625, 2020, doi: 10.1016/j.tsep.2020.100625.
• M. Alibaba, R. Pourdarbani, M. H. Khoshgoftar Manesh, I. Herrera-Miranda, I. Gallardo-Bernal, and J. L. Hernández-Hernández, “Conventional and advanced exergy-based analysis of hybrid geothermal-solar power plant based on ORC cycle,” Applied Sciences (Switzerland), vol. 10, no. 15, 2020, doi: 10.3390/app10155206.
• Y. Ding, C. Liu, C. Zhang, X. Xu, Q. Li, and L. Mao, “Exergoenvironmental model of Organic Rankine Cycle system including the manufacture and leakage of working fluid,” Energy, vol. 145, pp. 52–64, 2018, doi: 10.1016/j.energy.2017.12.123.
• Z. Fergani, D. Touil, and T. Morosuk, “Multi-criteria exergy based optimization of an Organic Rankine Cycle for waste heat recovery in the cement industry,” Energy Convers Manag, vol. 112, pp. 81–90, 2016, doi: 10.1016/j.enconman.2015.12.083.
• X. Hu, J. Banks, L. Wu, and W. Victor, “Numerical modeling of a coaxial borehole heat exchanger to exploit geothermal energy from abandoned petroleum wells in Hinton, Alberta,” Renew Energy, vol. 148, pp. 1110–1123, 2020, doi: 10.1016/j.renene.2019.09.141.
• P. Idialu, J. Ainodion, and L. Alabi, “Restoration and Remediation of Abandoned Petroleum Drill Sites - A Nigerian Case Study,” Mar. 29, 2004. doi: 10.2118/86796-MS.
• J. J. García-Pabón, D. Méndez-Méndez, J. M. Belman-Flores, J. M. Barroso-Maldonado, and A. Khosravi, “A review of recent research on the use of r1234yf as an environmentally friendly fluid in the organic rankine cycle,” Sustainability (Switzerland), vol. 13, no. 11, 2021, doi: 10.3390/su13115864.
• A. Lazzaretto and G. Manente, “A new criterion to optimize ORC design performance using efficiency correlations for axial and radial turbines,” International Journal of Thermodynamics, vol. 17, no. 3, pp. 173–181, 2014, doi: 10.5541/ijot.562.
• A. Borsukiewicz-gozdur and W. Nowak, “Geothermal Power Station with Supercritical Organic Cycle Principles of operations of a power,” World Geothermal Congress, no. April, pp. 25–29, 2010.
• H. Aydin, “Exergetic sustainability analysis of LM6000 gas turbine power plant with steam cycle,” Energy, vol. 57, pp. 766–774, 2013, doi: 10.1016/j.energy.2013.05.018.
• “Environmental Management - Life Cycle Assessment - Requirements and Guidelines, I. 14044 International Organization for Standardization (ISO),” 2006.
• M. Goedkoop and R. Spriensma, “The Eco-indicator 99 - A damage oriented method for Life Cycle Impact Assessment,” 2001.
• “ecoinvent v3.7.1 – ecoinvent.” Accessed: Jan. 11, 2022. [Online]. Available: https://ecoinvent.org/the-ecoinvent-database/data-releases/ecoinvent-3-7-1/
• G. Wernet, C. Bauer, B. Steubing, J. Reinhard, E. Moreno-Ruiz, and B. Weidema, “The ecoinvent database version 3 (part I): overview and methodology,” International Journal of Life Cycle Assessment, vol. 21, no. 9, pp. 1218–1230, 2016, doi: 10.1007/s11367-016-1087-8.
• J. Oyekale, M. Petrollese, D. Cocco, and G. Cau, “Energy Conversion and Management : X Annualized exergoenvironmental comparison of solar-only and hybrid solar-biomass heat interactions with an organic Rankine cycle power plant,” Energy Conversion and Management: X, vol. 15, no. April, p. 100229, 2022, doi: 10.1016/j.ecmx.2022.100229.
• A. Lazzaretto and G. Tsatsaronis, “SPECO: A systematic and general methodology for calculating efficiencies and costs in thermal systems,” Energy, vol. 31, no. 8–9, pp. 1257–1289, 2006, doi: 10.1016/j.energy.2005.03.011.
• E. Y. Gürbüz, O. V. Güler, and A. Keçebaş, “Environmental impact assessment of a real geothermal driven power plant with two-stage ORC using enhanced exergo-environmental analysis,” Renew Energy, vol. 185, pp. 1110–1123, 2022, doi: 10.1016/j.renene.2021.12.097.