Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules

Tülin Gürkan Polat; Ahmet Gençer; Meltem Asiltürk; Yılmaz Aksu

doi:10.17776/csj.1299101

EN

Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules

Abstract

In this study microcapsules were prepared by in-situ polymerization route with melamine formaldehyde as a shell material and tung oil as core material. Melamine formaldehyde (MF), a thermosetting polymer, is one of the most widely used monomers in microencapsulation due to its superior mechanical strength and thermal stability. Tung oil contains unsaturated double bonds that can be oxidized to form a film in air. Tung oil is fast drying and biodegradable, besides it is low cost and does not pollute the environment. Most importantly, tung oil is a versatile substance in industry. Therefore, tung oil is a good choice as core material. The chemical structure of microcapsules were characterized by Fourier Transform Infrared (FTIR) spectroscopy. The surface morphology and particle size and distribution were evaluated by Scanning Electron Microscopy (SEM). The thermal behavior of microcapsules and tung oil were studied by thermogravimetric analysis (TGA). The results showed that the spherical microcapsules (particle size of mostly 4-5 μm) were produced with a filling content of 15.64 wt.%, and a yield of 49.78 wt.%. The microcapsules exhibit a good thermal stability

Keywords

Microencapsulation, tung oil, melamine formaldehyde, in-situ polymerization.

Supporting Institution

TÜBİTAK TEYDEB 1501-Industry R&D support program

Project Number

3191369

References

[1] Snehal D., Swapna R., Manoj M., Chandrakant S., Microencapsulation: A review, Research Journal of Pharmacy and Technology, 6 (2013) 954-961.
[2] Oxley J., Stability and prediction of shelf-life for microencapsulated ingredients, Agro Food Industry Hi-Tech, 23 (2012) 60-63.
[3] Hu M., Guo J., Yu Y., Cao L., Xu Y., Research advances of microencapsulation and its prospects in the petroleum industry, Materials (Basel, Switzerland), 10 (4) (2017) 369.
[4] Bastos F., Santos L., Encapsulation of cosmetic active ingredients for topical application – a review, Journal of Microencapsulation, 33 (2015) 1-17.
[5] Ayoub A., Sood M., Singh J., Bandral J., Gupta N., Bhat A., Microencapsulation and its applications in food industry, Journal of Pharmacognosy and Phytochemistry, 8 (3) (2019) 32-37.
[6] Mamusa M., Resta C., Sofroniou C., Baglioni P., Encapsulation of volatile compounds in liquid media: Fragrances, flavors, and essential oils in commercial formulations, Advances in Colloid and Interface Science, 298 (2021) 102544.
[7] Singh M.N., Hemant K.S., Ram M., Shivakumar H.G., Microencapsulation: A promising technique for controlled drug delivery, Research in Pharmaceutical Sciences, 5 (2) (2010) 65-77.
[8] Meng Q., Zhong S., He S., Gao Y., Cui X., Synthesis and characterization of curcumin-loaded pH/reduction dual-responsive folic acid modified carboxymethyl cellulose-based microcapsules for targeted drug delivery, Journal of Industrial and Engineering Chemistry, 105 (2022) 251-258.
[9] Konuklu Y., Unal M., Paksoy H.O., Microencapsulation of caprylic acid with different wall materials as phase change material for thermal energy storage, Solar Energy Materials and Solar Cells, 120 (2014) 536-542.
[10] Lin Y., Zhu C., Alva G., Fang G., Microencapsulation and thermal properties of myristic acid with ethyl cellulose shell for thermal energy storage, Applied Energy, 231 (2018) 494-501.

[11] Zou L., Li S., Li L., Ji W., Li Y., Cheng X., Synthesis of TiO2 shell microcapsule-based phase change film with thermal energy storage and buffering capabilities, Materials Today Sustainability, 18 (2022) 100119.
[12] Can A., Erkan G., Duran H., Sivrikaya H., Microencapsulated di-ammonium hydrogen phosphate (DAHP) with a polyurethane shell: characterization and its properties in wood, European Journal of Wood and Wood Products, 79 (2021) 1405-1417.
[13] Tomaro-Duchesneau C., Saha S., Malhotra M., Kahouli I., Prakash S., Microencapsulation for the therapeutic delivery of drugs, live mammalian and bacterial cells, and other biopharmaceutics: Current status and future directions, Journal of Pharmaceutics, 103527 (2013) 1-19.
[14] Cesari A., Loureiro M., Vale M., Yslas E., Dardanelli M., Marques A.C., Polycaprolactone microcapsules containing citric acid and naringin for plant growth and sustainable agriculture: physico-chemical properties and release behavior, Science of the Total Environment, 703 (2020) 1-11.
[15] Mohammed N.K., Tan C.P., Manap Y.A., Muhialdin B.J., Hussin A.S.M., Spray drying for the encapsulation of oils-A review, Molecules, 25 (17) (2020).
[16] Favaro-Trindade C., Technological challenges for spray chilling encapsulation of functional food ingredients, Food Technology and Biotechnology, 51 (2013) 171.
[17] Seth D., Mishra H.N., Deka S.C., Effect of microencapsulation using extrusion technique on viability of bacterial cells during spray drying of sweetened yoghurt, International Journal of Biological Macromolecules, 103 (2017) 802-807.
[18] Nogueira M., Prestes C., Burkert J., Microencapsulation by lyophilization of carotenoids produced by Phaffia rhodozyma with soy protein as the encapsulating agent, Food Science and Technology, 37 (2017) 1-4.
[19] Krupa I., Nógellová Z., Janigová I., Boh Podgornik B., Šumiga B., Kleinová A., Karkri M., AlMaadeed M.A., Phase change materials based on high-density polyethylene filled with microencapsulated paraffin wax, Energy Conversion and Management, 87 (2014) 400-409.
[20] Soh S.H, Lee L., Microencapsulation and nanoencapsulation using supercritical fluid (SCF) techniques, Pharmaceutics, 11 (2019) 1-17.
[21] Chung U.S., Min J.H., Lee P.C., Koh W.G., Polyurethane matrix incorporating PDMS-based self-healing microcapsules with enhanced mechanical and thermal stability, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 518 (2017) 173-180.
[22] Thanawala K., Khanna A., Singh R., Development of self-healing coatings based on linseed oil as autonomous repairing agent for corrosion resistance, Materials, 7 (2014) 7324-7338.
[23] Jeong S.G., Jeon J., Seo J., Lee J.H., Kim S., Performance evaluation of the microencapsulated PCM for wood-based flooring application, Energy Conversion and Management, 64 (2012) 516-521.
[24] Pretzl M., Neubauer M., Tekaat M., Kunert C., Kuttner C., Leon G., Berthier D., Erni P., Ouali L., Fery A., Formation and mechanical characterization ofaminoplast core/shell microcapsules, ACS Applied Materials and Interfaces, 4 (2012) 2940-2948.
[25] Pan X.M., York D., Preece J.A., Zhang Z.B., Size and strength distributions of melamine-formaldehyde microcapsules prepared by membrane emulsification, Powder Technology, 227 (2012) 43-50.
[26] Mustapha A.N., AlMheiri M., AlShehhi N., Rajput N., Joshi S., Antunes A., AlTeneiji M., The Microencapsulation of Tung Oil with a Natural Hydrocolloid Emulsifier for Extrinsic Self-Healing Applications. Polymers (Basel). 14 (9) (2022) 1907.
[27] Hwang J.S., Kim J.N., Wee Y.J., Yun J.S., Jang H.G., Kim S.H., Ryu H.W., Preparation and characterization of melamine-formaldehyde resin microcapsules containing fragrant oil, Biotechnology and Bioprocess Engineering, 11 (2006) 332-336.
[28] Huang M., Yang J., Facile microencapsulation of HDI for self-healing anticorrosion coatings, Journal of Materials Chemistry, 21 (2011) 11123-11130.
[29] Haghayegh M., Mirabedini M., Yeganeh H., Microcapsules containing multi-functional reactive isocyanate-terminated polyurethane prepolymer as a healing agent. Part 1: synthesis and optimization of reaction conditions, Journal of Materials Science, 51 (2016) 3056-3068.
[30] Wang D., Preparation and property analysis of melamine formaldehyde foam, Advances in Materials Physics and Chemistry, 2 (2012) 63-67.
[31] Zhu H., Xu S., Preparation and fire behavior of rigid polyurethane foams synthesized from modified urea-melamine-formaldehyde resins, RSC Advances, 8 (2018) 17879-17887.
[32] Mirghani M., Detection of formaldehyde in cheese using FTIR spectroscopy, International Food Research Journal, 24 (2017) 496-500.
[33] Saikia B., Dolui S., Designing semiencapsulation based covalently self-healable poly(methyl methacrylate) composites by atom transfer radical polymerization, Journal of Polymer Science Part A Polymer Chemistry, 54 (2016) 1842-1851.
[34] Weiss S., Urdl K., Mayer H., Zikulnig-Rusch E., Kandelbauer A., IR spectroscopy: Suitable method for determination of curing degree and crosslinking type in melamine-formaldehyde resins, Journal of Applied Polymer Science, 47691 (2019) 1-10.
[35] Izzo F.C., Källbom A., Nevin A., Multi-analytical assessment of bodied drying oil varnishes and their use as binders in armour paints, Heritage, 4 (2021) 3402-3420.
[36] Xiao L., Huang, J., Wang Y., Chen J., Liu Z., Nie, X., Preparation of tung oil‐loaded PU/PANI microcapsules and synergetic anti‐corrosion properties of self‐healing epoxy coatings, ACS Sustainable Chemistry and Engineering, 7 (20) (2019) 17344-17353.
[37] Pan P., Yan X., Peng W., Tung oil microcapsules prepared with different emulsifiers and their effects on the properties of coating film, Coatings, 12 (2022) 1166.
[38] Li H., Cui Y., Wang H., Zhu Y., Wang B., Preparation and application of polysulfone microcapsules containing tung oil in self-healing and self-lubricating epoxy coating, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 518 (2017) 181-187.
[39] Feng Y., Cui Y., Zhang M., Li M., Li H., Preparation of tung oil‐loaded PU/PANI microcapsules and synergetic anti‐corrosion properties of self‐healing epoxy coatings, Macromolecular Materials and Engineering, 306 (2) (2020) 2000581.

Details

Primary Language

English

Subjects

Bioassays

Journal Section

Research Article

Authors

Tülin Gürkan Polat ^*
0000-0002-6545-0518
Türkiye

Ahmet Gençer
0000-0002-4961-966X
Türkiye

Meltem Asiltürk
0000-0001-8447-5684
Türkiye

Yılmaz Aksu
0000-0003-3687-890X
Türkiye

Publication Date

December 28, 2023

Submission Date

May 24, 2023

Acceptance Date

November 21, 2023

Published in Issue

Year 2023 Volume: 44 Number: 4

DOI

https://doi.org/10.17776/csj.1299101

IZ

https://izlik.org/JA58UN28NJ

APA

Gürkan Polat, T., Gençer, A., Asiltürk, M., & Aksu, Y. (2023). Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules. Cumhuriyet Science Journal, 44(4), 703-709. https://doi.org/10.17776/csj.1299101

AMA

1.Gürkan Polat T, Gençer A, Asiltürk M, Aksu Y. Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules. CSJ. 2023;44(4):703-709. doi:10.17776/csj.1299101

Chicago

Gürkan Polat, Tülin, Ahmet Gençer, Meltem Asiltürk, and Yılmaz Aksu. 2023. “Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules”. Cumhuriyet Science Journal 44 (4): 703-9. https://doi.org/10.17776/csj.1299101.

EndNote

Gürkan Polat T, Gençer A, Asiltürk M, Aksu Y (December 1, 2023) Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules. Cumhuriyet Science Journal 44 4 703–709.

IEEE

[1]T. Gürkan Polat, A. Gençer, M. Asiltürk, and Y. Aksu, “Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules”, CSJ, vol. 44, no. 4, pp. 703–709, Dec. 2023, doi: 10.17776/csj.1299101.

ISNAD

Gürkan Polat, Tülin - Gençer, Ahmet - Asiltürk, Meltem - Aksu, Yılmaz. “Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules”. Cumhuriyet Science Journal 44/4 (December 1, 2023): 703-709. https://doi.org/10.17776/csj.1299101.

JAMA

1.Gürkan Polat T, Gençer A, Asiltürk M, Aksu Y. Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules. CSJ. 2023;44:703–709.

MLA

Gürkan Polat, Tülin, et al. “Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules”. Cumhuriyet Science Journal, vol. 44, no. 4, Dec. 2023, pp. 703-9, doi:10.17776/csj.1299101.

Vancouver

1.Tülin Gürkan Polat, Ahmet Gençer, Meltem Asiltürk, Yılmaz Aksu. Preparation and Characterization of Tung Oil Loaded Melamine Formaldehyde Microcapsules. CSJ. 2023 Dec. 1;44(4):703-9. doi:10.17776/csj.1299101

Cited By

Effect of ZrO2 nanoparticles on the self-lubrication behavior of the linseed oil-loaded microcapsule/ epoxy composite coatings

Ceramics International

https://doi.org/10.1016/j.ceramint.2024.07.039

Synergistic catalytic effects of combined manganese-based driers on accelerating the drying process of tung oil

Progress in Organic Coatings

https://doi.org/10.1016/j.porgcoat.2024.108792

Self‐healable corrosion‐protective alkyd resin based on microencapsulated natural tung oil

Journal of Applied Polymer Science

https://doi.org/10.1002/app.56223

As of 2026, Cumhuriyet Science Journal will be published in six issues per year, released in February, April, June, August, October, and December