Yıl 2019, Cilt 22 , Sayı 3, Sayfalar 336 - 344 2019-09-09

Comparison of the Microtensile Bond Strength Of Four Different Bulk-Fill Resin Composites Of Class I Cavities With Dentin

Serra KUTLU [1] , İhsan HUBBEZOĞLU [2]



Objectives: The aim of our study is to compare the microtensile bond strengths of four different bulk-fill composites and a microhybrid composite to the dentin.

Materials and methods: 4 bulk-fill composites and a microhybrid composite were tested. Class I occlusal cavities were prepared on 25 freshly drawn intact human molar teeth, randomly divided into five groups [G-aenial posterior(Control group), Estelite Bulk Fill flow, GrandioSO x-tra, Beautiful Bulk Restorative, Fill-Up] and the cavities were restorated with five composite systems by using their own adhesive systems. Completed restoration teeth bukkolingual and mesiodistal sections were taken, three samples were obtained from each tooth(n:15). Microtensile bond strength values of groups were measured by universal test machine. Microscopic changes were examined by SEM. The data were evaluated by one-way ANOVA and Tukey tests.

Results: While the control group showed the highest microtensile bond strength, Fill-Up group showed the lowest. The control group was statistically significant when compared to the four different bulk-fill groups used in the study(p<0.05). Although the GrandioSO x-tra group showed the highest bonding strength among the bulk-fill composites, the differences between the Beautifil Bulk Restorative and Estelite Bulk Fill flow were statistically insignificant(p>0.05). Fill-Up was found to be statistically significant when compared to the other bulk-fill groups(p<0.05). In SEM analyzes a regular gap is seen along the hybrid layer only in Estelite Bulk Fill flow. Conclusions: No bulk-fill composite group could reach the value of the bond strength of microhybrid composite. Although the Fill-Up group was used with the etch and rinse adhesive system among the bulk-fill composites, it showed the lowest bond strength.results: While the control group showed the highest microtensile bond strength, Fill-Up group showed the lowest. The control group was statistically significant when compared to the four different bulk-fill groups used in the study(p<0.05). Although the GrandioSO x-tra group showed the highest bonding strength among the bulk-fill composites, the differences between the Beautifil Bulk Restorative and Estelite Bulk Fill flow were statistically insignificant(p>0.05). Fill-Up was found to be statistically significant when compared to the other bulk-fill groups(p<0.05). In SEM analyzes a regular gap is seen along the hybrid layer only in Estelite Bulk Fill flow.Conclusions: No bulk-fill composite group could reach the value of the bond strength of microhybrid composite. Although the Fill-Up group was used with the etch and rinse adhesive system among the bulk-fill composites, it showed the lowest bond strength.

Results: While the control group showed the highest microtensile bond strength, Fill-Up group showed the lowest. The control group was statistically significant when compared to the four different bulk-fill groups used in the study(p<0.05). Although the GrandioSO x-tra group showed the highest bonding strength among the bulk-fill composites, the differences between the Beautifil Bulk Restorative and Estelite Bulk Fill flow were statistically insignificant(p>0.05). Fill-Up was found to be statistically significant when compared to the other bulk-fill groups(p<0.05). In SEM analyzes a regular gap is seen along the hybrid layer only in Estelite Bulk Fill flow.

Conclusions: No bulk-fill composite group could reach the value of the bond strength of microhybrid composite. Although the Fill-Up group was used with the etch and rinse adhesive system among the bulk-fill composites, it showed the lowest bond strength.


Bulk-fill composites, microtensile bond strength, dentin
  • REFERENCES1. Dresch W, Volpato S, Gomes J, Ribeiro N, Reis A, Loguercio A. Clinical evaluation of a nanofilled composite in posterior teeth: 12-month results. Oper Dent 2006;31:409-417.2. Park J, Chang J, Ferracane J, Lee IB. How should composite be layered to reduce shrinkage stress: incremental or bulk filling? Dent Mater 2008;24:1501-1505.3. Petrovic LM, Atanackovic TM. A model for shrinkage strain in photo polymerization of dental composites. Dent Mater 2008;24:556-560.4. Petrovic LM, Drobac MR, Stojanac IL, Atanackovic TM. A method of improving marginal adaptation by elimination of singular stress point in composite restorations during resin photo-polymerization. Dent Mater 2010;26:449-455.5. Burgess J, Walker R, Davidson J. Posterior resin-based composite: review of the literature. Pedıatr Dent 2002;24:465-479.6. Ferracane JL. Resin composite—state of the art. Dent Mater 2011;27:29-38.7. Lazarchik DA, Hammond BD, Sikes CL, Looney SW, Rueggeberg FA. Hardness comparison of bulk-filled/transtooth and incremental-filled/occlusally irradiated composite resins. The J Prosthet Dent 2007;98:129-140.8. Ilie N, Hickel R. Investigations on a methacrylate-based flowable composite based on the SDR technology. Dent Mater 2011;27:348-355.9. Moorthy A, Hogg C, Dowling A, Grufferty B, Benetti AR, Fleming G. Cuspal deflection and microleakage in premolar teeth restored with bulk-fill flowable resin-based composite base materials. Int J Dent 2012;40:500-505.10. Vasquez D. A New Generation Bulk-Fill Composite For Direct Posterior Restorations. Inside Dentistry 2012;8:11. Itota T, Carrick TE, Yoshiyama M, McCabe JF. Fluoride release and recharge in giomer, compomer and resin composite. Dent Mater 2004;20:789-795. 12. Dhull K, Nandlal B, Dentistry P. Effect of low-concentration daily topical fluoride application on fluoride release of giomer and compomer: an in vitro study. J Indian Soc Pedod Prev Dent 2011;29:39. 13. Gordan VV, Mondragon E, Watson RE, Garvan C, Mjör IA. A clinical evaluation of a self-etching primer and a giomer restorative material: results at eight years. J Am Dent Assoc 2007;138:621-627. 14. Saku S, Kotake H, Scougall-Vilchis RJ, Ohashi S, Hotta M, Horiuchi S, Hamada K, Asaoka K, Tanaka E, Yamamoto E. Antibacterial activity of composite resin with glass-ionomer filler particles. Dent Mater 2010;29:193-198.15. Murayama R, Furuichi T, Yokokawa M, Takahashi F, Kawamoto R, Takamizawa T ve ark. Ultrasonic investigation of the effect of S-PRG filler-containing coating material on bovine tooth demineralization. Dent Mater 2012;31:954-959.16. Ünal M. The Comparison of Shear Bond Strenght of Different Bulk-Fill Composites to a Bioactive Dentine Substitute. CDJ 2018;21:274-283.17. Buldur B, Öznurhan F, Kayabaşı M, Şahin F. Shear Bond Strength Of Two Calcium Silicate-Based Cements to Compomer.CDJ 2018;21:18-23.18. Sakaguchi RL. Craig's Restorative Dental Materials. Elsevier Health Sciences, 2006.19. Armstrong S, Geraldeli S, Maia R, Raposo LHA, Soares CJ, Yamagawa J. Adhesion to tooth structure: A critical review of “micro” bond strength test methods. Dent Mater 2010;26:e50-e62.20. Colak H, Ercan E, Hamidi MM. Shear bond strength of bulk-fill and nano-restorative materials to dentin. Eur J Dent 2016;10:40-45.21. Almeida Junior L, Lula ECO, Penha KJS, Correia VS, Magalhaes FAC, Lima DM, Firoozmand LM. Polymerization Shrinkage of Bulk Fill Composites and its Correlation with Bond Strength. Braz Dent J 2018;29:261-267. 22. Tsujimoto A, Barkmeier WW, Takamizawa T, Latta MA, Miyazaki M. Depth of cure, flexural properties and volumetric shrinkage of low and high viscosity bulk-fill giomers and resin composites. Dent Mater 2017;36:205-213.23. Monterubbianesi R, Orsini, G, Tosi G, Conti C, Librando V, Procaccini M, Putignano A. Spectroscopic and Mechanical Properties of a New Generation of Bulk Fill Composites. Front Physiol 2016;7:652.24. Gupta SK, Mann NS, Kaur SP, Singh JP. Bulk fill vs Conventional Composites: A Microleakage Study. J Periodontal Med Clin Prac 2016;3:122-127.
Birincil Dil en
Konular Sağlık Bilimleri ve Hizmetleri
Bölüm Original Research Articles
Yazarlar

Orcid: 0000-0001-5127-0885
Yazar: Serra KUTLU (Sorumlu Yazar)
Kurum: SİVAS CUMHURİYET ÜNİVERSİTESİ DİŞ HEKİMLİĞİ FAKÜLTESİ RESTORATİF DİŞ TEDAVİSİ
Ülke: Turkey


Orcid: 0000-0001-8984-9286
Yazar: İhsan HUBBEZOĞLU
Kurum: SİVAS CUMHURİYET ÜNİVERSİTESİ DİŞ HEKİMLİĞİ FAKÜLTESİ RESTORATİF DİŞ TEDAVİSİ
Ülke: Turkey


Destekleyen Kurum CÜBAP
Proje Numarası DİŞ-214
Tarihler

Başvuru Tarihi : 30 Temmuz 2019
Kabul Tarihi : 24 Ağustos 2019
Yayımlanma Tarihi : 9 Eylül 2019

EndNote %0 Cumhuriyet Dental Journal Comparison of the Microtensile Bond Strength Of Four Different Bulk-Fill Resin Composites Of Class I Cavities With Dentin %A Serra Kutlu , İhsan Hubbezoğlu %T Comparison of the Microtensile Bond Strength Of Four Different Bulk-Fill Resin Composites Of Class I Cavities With Dentin %D 2019 %J Cumhuriyet Dental Journal %P 1302-5805-2146-2852 %V 22 %N 3 %R doi: 10.7126/cumudj.598724 %U 10.7126/cumudj.598724