Experimental determination of structural and electrical properties for constant tin concentrations in the Pb-Al-Sn composite system

Yıl 2013, Cilt: 34 Sayı: 3, 50 - 63, 13.11.2013

Canan Alper Billur Buket Saatçi Mehmet Arı A Altıncı

Öz

For the first time, the structural and electrical properties of Pb-Al-Sn  composite system for constant  tin concentrations were investigated in this work. The electrical conductivity of the samples depending on temperature was measured by four-point probe,  and  it was found  that  the  conductivity  decreases  almost  linearly with  the temperature.  The  structural  properties  of the samples  were  determined  by  Scanning  Electron  Microscope  (SEM),  X-ray  diffraction  (XRD)  and  Energy  Dispersive  X - ray Analysis  (EDX).  The  SEM  micrographs  of  the  samples  illustrated  smooth  surfaces  with  a  clear  grain  boundary.  The  crystal structure of the samples was  indexed in  face-centered cubic  (fcc)  by using XRD data. The cell parameters  and the grain sizes were  determined  from  the  XRD  patterns.  In  addition,  the  temperature  coefficients  of  electrical  resistivities  were  obtained determined, which were independent of the compositions of the composite system.

Anahtar Kelimeler

Electrical conductivity, crystal structure, X-ray diffraction, electron microscopy.

Kaynakça

• Y. Ogita, Y. Ido, and M. Sakamoto, “Improvement of aluminium-lead bearings”, Metal Powder Rep. 46 (2) (1991) 37–44.
• S. Mohan, V. Agarwala, and S. Ray, “Friction characteristics of stir-cast Al-Pb alloys”, Wear 157 1 (1992) 9-17.
• M. Zhu, Y. Gao, C.Y. Chung, Z.X. Che, K.C. Lou, and B.L. Li, “Improvement of the wear behavior of Al-Pb alloys by mechanical alloying”, Wear 242 (1-2) (2000) 47-53.
• M.D. Achtermann, and M.E. Greenlee, “Application of wrought lead-calcium batteries in Europe” , J. Power Sources 33 (1-4) (1991) 87-92.
• J. Wirtz, “New developments in continuous cast grids, Proc. 7 th. Int. Lead Conf., Madrid, Spain, 1980, D. Lambert, Batteries Int. Oct.)(1992) p.36; Wirtz J. Batteries Int, (Jan) (1996) 56-63.
• R.D. Prengaman, “Challenges from corrosion-resistant grid alloys in lead acid battery manufacturing”, J. Power Sources 95 1-2 (2001) 224-233.
• A.B. Ziya, and K. Ohshimab, “X-ray diffraction study of the structure and thermal parameters of the ternary Au–Ag–Pd alloys” J. Alloys and Compd. 425 1-2 (2006) 123-128.
• P. Grima Gallardo, K. Ca´rdenas, M. Quintero, J. Ruiz, and G.E. Delgado, “X-ray diffraction studies on (CuAlSe 2 ) X (FeSe) 1-X alloys”, Mater. Res. Bull.36 (2001) 861–866.
• P. Scherrer, Göttinger Nachrichten Gesell. 2 (1918) 98-100.
• M.R. Pinasco, E. Cordano, and M. Giovannini, “X-ray diffraction and microstructural study of PFM precious metal dental alloys under different metallurgical conditions”, J. Alloys Compd. 289 (1999) 289– 2
• E. Antolini, and F. Cardellini, “Formation of carbon supported PtRu alloys: an XRD analysis” J. Alloys Compd. 315 (2001) 118–122.
• J.H. Kim, Y.M. Im, J.P. Noh, S.Miyazaki, and and T.H. Nam, “ “Microstructures and martensitic transformation behavior of Ti-Ni-Sn alloys” Scripta Mater. 65 (2011) 608–610.
• K. Masayuki, E. Matsubara, J. Saida, M. Nakayama, K. Uematsu, T. Zhang, and et al. “Crystallisation behaviour of Cu60Zr30Ti10 bulk glassy alloy” Mat. Sci.Eng. A 375–377 (2004) 744– 7 62
• Experimental determination of structural and electrical properties for constant tin V.P. Sinha, P.V. Hegde, G.J. Prasad, G.K. Dey, and H.S. Kamath, “Phase transformation of metastable cubic -phase in U–Mo alloys” J. Alloys Compd. 506 (2010) 253–262.
• M. Geetha, A.K. Singh, A.K. Gogia, and R. Asokamani, “Effect of thermomechanical processing on evolution of various phases in Ti–Nb–Zr alloys” J. Alloys Compd. 384 (2004)131–144.
• A. Patterson, Phys. Rev. 56 (1939) 978-982.
• M. Arı, B. Saatçi, M. Gündüz, F. Meydaneri, and M. Bozoklu, “Microstructure and thermo-electrical transport properties of Cd–Sn alloys” Mater. Charact. 59 (2008) 624-630.
• M. Arı. B. Saatçi, M. Gündüz, M. Payveren, and S. Durmuş, “Thermoelectrical characterization of Sn–Zn alloys” Mater. Charact. 59 (2008) 757-763.
• B. Saatçi, M. Arı, M. Gündüz, F. Meydaneri, M. Bozoklu and S. Durmuş, “Thermal and electrical conductivities of Cd Zn alloys “ J. Phys.:Condens. Matter. 18 (2006)10643-10653.
• B. D. Cullity, Elements of X-Ray diffraction, third printing Addison-Wesley Publishing Company, Inc. United State of America, 1967.
• F. M. Smits, “Measurement of Sheet Resistivities with the Four-Point Probe” The Bell sys. Tech. J. (1958) 711-718.
• T. Su, X. Jia, H. Ma, J. Guo, Y. Jiang, N. Dong, and et al. “Thermoelectric properties of nonstoichiometric PbTe prepared by HPHT” J. Alloys and Compd. 468 (2009) 410-413.
• F. Meydaneri, B. Saatçi and M. Arı, “Thermo-Electrcial Characterization Of Lead-Cadmium (Pb-Cd) Alloys” Int. J.Phys. Sci. 7 48 (2012) 6210-6221.
• Y. Ocak, S. Aksöz, N. Maraşlı, and E. Çadırlı, “Dependency of thermal and electrical conductivity on the temperature and composition of Sn in the Pb−Sn alloys” Fluid Phase Equilibria, 295, 1, (2010) 60-67. H. E. Swanson and E. Tatge, Natl. Bur. Stand. Circ. (U.S.), 539, (1953) 34.
• A. S. Raymond, (1998) Principles of Physics (2 nd. Ed.) Fort Worth, Texas; London: Sounders College pub. p.602.