Full-mouth reconstruction with Implant and Tooth-supported Zirconia Restorations in a Digital Workflow

Yıl 2021, Cilt: 48 Sayı: 3, 119 - 123, 31.12.2021

Ece İrem Oğuz Mehmet Ali Kılıçarslan

https://doi.org/10.52037/eads.2021.0017

Öz

Zirconia has become a popular restorative material regarding the mechanical and biocompatibility advantages. Monolithic and translucent forms of zirconia advanced the aesthetics of this material, making it the material of choice for both tooth- and implant- supported restorations. Also, digital fabrication of zirconia not only enables accurate restorations but also provides time efficiency. The present case report demonstrates the rehabilitation of a patient who has generalized tooth wear with implant- and tooth-supported monolithic zirconia restorations with buccal veneers in a newly established occlusal vertical dimension. The treatment process was completed in a digital workflow as the impressions were taken with a powder-free intraoral scanner and the digital data were send to the dental laboratory to fabricate the restorations. Monolithic zirconia restorations with buccal feldspathic veneers were completed without any adjustments in only two appointments. The patient was satisfied and the restorations have been in service for two years.

Anahtar Kelimeler

zirconia, monolithic, CAD/CAM, implant

Kaynakça

• 1. Papaspyridakos P, Chochlidakis K, Kang K, Chen YW, Alghfeli A, Kudara Y, et al. Digital Workflow for Implant Rehabilitation with Double Full-Arch Monolithic Zirconia Prostheses. J Prosthodont. 2020;29(6):460-5.
• 2. Spitznagel FA, Boldt J, Gierthmuehlen PC. CAD/CAM Ceramic Restorative Materials for Natural Teeth. J Dent Res. 2018;97(10):1082-91.
• 3. Stawarczyk B, Frevert K, Ender A, Roos M, Sener B, Wimmer T. Comparison of four monolithic zirconia materials with conventional ones: Contrast ratio, grain size, four-point flexural strength and two-body wear. J Mech Behav Biomed Mater. 2016;59:128-38.
• 4. Marchack BW, Sato S, Marchack CB, White SN. Complete and partial contour zirconia designs for crowns and fixed dental prostheses: a clinical report. J Prosthet Dent. 2011;106(3):145-52.
• 5. Diéguez-Pereira M, Chávarri-Prado D, Estrada-Martínez A, Pérez-Pevida E, Brizuela-Velasco A. Monolithic and Minimally Veneered Zirconia Complications as Implant-Supported Restorative Material: A Retrospective Clinical Study up to 5 Years. BioMed Research International. 2020;2020:8821068.
• 6. Worni A, Katsoulis J, Kolgeci L, Worni M, Mericske-Stern R. Monolithic zirconia reconstructions supported by teeth and implants: 1- to 3-year results of a case series. Quintessence Int. 2017;48(6):459-67.
• 7. Sadowsky SJ. Has zirconia made a material difference in implant prosthodontics? A review. Dent Mater. 2020;36(1):1-8.
• 8. Abdulmajeed AA, Lim KG, Närhi TO, Cooper LF. Complete-arch implant-supported monolithic zirconia fixed dental prostheses: A systematic review. J Prosthet Dent. 2016;115(6):672-7.e1.
• 9. Sudhir N, Chittaranjan B, Kumar BA, Taruna M, Kumar MP, Reddy MR. Digital Cephalometric Tracings by PRO-CEPH V3 Software for Comparative Analyses of Vertical Dimension in Edentulous Patients. J Clin Diagn Res. 2015;9(5):ZC01-5.
• 10. Guichet DL. Digital Workflows in the Management of the Esthetically Discriminating Patient. Dent Clin North Am. 2019;63(2):331-44.
• 11. Sailer I, Fehér A, Filser F, Gauckler LJ, Lüthy H, Hämmerle CH. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont. 2007;20(4):383-8.
• 12. Juntavee N, Sirisathit I. Marginal accuracy of computer-aided design- and computer-aided manufacturing-fabricated full-arch zirconia restoration. Clin Cosmet Investig Dent. 2018;10:9-17.
• 13. Reich S, Wichmann M, Nkenke E, Proeschel P. Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems. Eur J Oral Sci. 2005;113(2):174-9.
• 14. Papadiochou S, Pissiotis AL. Marginal adaptation and CAD-CAM technology: A systematic review of restorative material and fabrication techniques. J Prosthet Dent. 2018;119(4):545-51.
• 15. Caglar I, Ates SM, Yesil Duymus Z. The effect of various polishing systems on surface roughness and phase transformation of monolithic zirconia. J Adv Prosthodont. 2018;10(2):132-7.
• 16. Cakir-Omur T, Gozneli R, Ozkan Y. Effects of Silica Coating by Physical Vapor Deposition and Repeated Firing on the Low-Temperature Degradation and Flexural Strength of a Zirconia Ceramic. J Prosthodont. 2019;28(1):e186-e94.
• 17. Mohammadi-Bassir M, Babasafari M, Rezvani MB, Jamshidian M. Effect of coarse grinding, overglazing, and 2 polishing systems on the flexural strength, surface roughness, and phase transformation of yttrium-stabilized tetragonal zirconia. J Prosthet Dent. 2017;118(5):658-65.
• 18. Karakoca S, Yilmaz H. Influence of surface treatments on surface roughness, phase transformation, and biaxial flexural strength of Y-TZP ceramics. J Biomed Mater Res B Appl Biomater. 2009;91(2):930-7.
• 19. Huh YH, Park CJ, Cho LR. Evaluation of various polishing systems and the phase transformation of monolithic zirconia. J Prosthet Dent. 2016;116(3):440-9.
• 20. Dérand P, Dérand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont. 2000;13(2):131-5.
• 21. Griffin JD, Jr. Combining monolithic zirconia crowns, digital impressioning, and regenerative cement for a predictable restorative alternative to PFM. Compend Contin Educ Dent. 2013;34(3):212-22.
• 22. Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now? Dent Mater. 2011;27(1):71-82.
• 23. Oudkerk J, Eldafrawy M, Bekaert S, Grenade C, Vanheusden A, Mainjot A. The one-step no-prep approach for full-mouth rehabilitation of worn dentition using PICN CAD-CAM restorations: 2-yr results of a prospective clinical study. J Dent. 2020;92:103245.
• 24. Abduo J, Lyons K. Clinical considerations for increasing occlusal vertical dimension: a review. Aust Dent J. 2012;57(1):2-10.
• 25. Vailati F, Carciofo S. CAD/CAM monolithic restorations and full-mouth adhesive rehabilitation to restore a patient with a past history of bulimia: the modified three-step technique. Int J Esthet Dent. 2016;11(1):36-56.