Economic Balance of a Clearcutting Operation Using Terrestrial LiDAR
Abstract
The present study verified terrestrial LiDAR data measured at a clearcutting operation site of the Funyu Experimental Forest, Utsunomiya University, Japan. The economic balance of the operation was analyzed with time studies. Finally, the economic balances estimated using terrestrial LiDAR data and an optimal bucking algorithm were compared. The root mean squared errors (RMSEs) between top end diameters of logs that were obtained below 10 m and measured using manual and terrestrial LiDAR were within 2 cm. Log diameters were normally rounded to 2 cm; therefore, the RMSEs were within allowable ranges. However, RMSEs were increased according to an increase in top end heights because of branches. Furthermore, the understory vegetation also disrupted laser scanning. The economic balance considering sweep from terrestrial LiDAR was estimated. As a result, the profit was estimated to be USD 96,797/ha, which was close to that estimated by manually measured data, at USD 90,235/ha. Without considering sweep, profit was overestimated as USD 116,306/ha. The use of an optimal bucking algorithm improved the profit to USD 126,536/ha.
Keywords
Economic balance, Optimal bucking algorithm, Sweep, Terrestrial LiDAR, Top end diameter of log
References
- Acuna, M., Murphy, G. and Rombouts, J., 2009. Determining Radiata pine tree value and log product yields using terrestrial LiDAR and optimal bucking in South Australia. COFE.
- Akay, A. E., Sessions, J., Serin, H., Pak, M. and Yenilmez, N., 2010. Applying optimum bucking method in producing Taurus Fir (Abies cilicica) logs in Mediterranean region of Turkey. Baltic Forestry 16(2): 273-279.
- ANRE, 2012. Settlement of the Details of the Feed-in Tariff Scheme for Renewable Energy, including purchase price and surcharge rates. http://www.meti.go.jp/english/press/2012/0618_01.html (Accessed: 18 June 2012).
- Haynes, H.J.G. and Visser, R.J.M., 2004. An applied hardwood value recovery study in the Appalachian Region of Virginia and West Virginia. International Journal of Forest Engineering 15(1): 25-31.
- Ito, T., Matsue, K., Shuin, Y. and Naito, K., 2011. Estimating individual stem volumes of Sugi and Hinoki with different densities using airborne LiDAR. Journal of the Japan Society of Photogrammetry and Remote Sensing 50(1): 18-26.
- Kato, A., Ando, Y., Yoshida, T., Kajiwara, K., Honda, Y. and Kobayashi, T., 2014a. Method to create forest inventory using portable terrestrial laser. Journal of the Japanese Society of Revegetation Technology 40(1): 136-141.
- Kato, A., Ishii, H., Enoki, T., Osawa, A., Kobayashi, T., Umeki, K., Sasaki, T. and Matsue, K., 2014b. Application of laser remote sensing to forest ecological research. Journal of the Japan Forest Society 96(3): 168-181.
- Murphy, G.E., Acuna, M.A. and Dumbrell, I., 2010. Tree value and log product yield determination in radiate pine plantations in Australia: comparisons of terrestrial laser scanning with a forest inventory system and manual measurements. Canadian Journal of Forest Research 40: 2223-2233.
- Nagumo, H., Shiraishi, N. and Tanaka, M., 1981. Systematic method for constructing a yield table for Sugi even-aged stand: A case study in experimental plots of the Tokyo University Forest in Chiba. Bulletin of Tokyo University Forest 71: 269-330.
- Nakahata, C., Aruga, K. and Saito, M., 2014. Examining the optimal bucking method to maximize profits in commercial thinning operations in Nasunogahara Area, Tochigi Prefecture, Japan. Croatian Journal of Forest Engineering 35(1): 45-61.
