The Evaluation of SfM Technique in the Determination of Surface Deformation on Skidding Roads Following Timber Harvesting
Abstract
Forest roads are necessary engineering structures for accessing and managing forestry resources. Considering the difficult terrain and its numerous variable effects, it must be ensured that the capacity of forest roads function adequately and that the road platform is suitable for vehicle traffic. This study aimed to focus on the determination and evaluation of deformation on the surface of the soil roads in the forest using SfM (Structure from Motion) technique. The study focused on the usage opportunity of close-range photogrammetry in the analysis of surface deformation on skidding roads used for forestry operations. Field surveys were conducted on a newly constructed skidding road for forestry operations with a four-wheel farm tractor. The geo-spatial location of the road was obtained by a Total Station (TS) prior to harvesting operation. A digital camera mounted on a 3.5 m high pole was used as a carrier platform in the field survey. The photographs with front and side overlaps (approximately 60% and -80%) were obtained from 95 m segment of the unpaved road. The spatial (X, Y and Z) differences between field measurements- and SfM-based models were compared using Root Mean Square Error (RMSE), and the values of spatial error (SfMXY: 0.048; SfMZ: 0.010 for estimated model) were calculated. The change rate of stable, accumulations and abrasions on the road surface were calculated as 0.165%, 48.642% and 51.192%, respectively. The present study demonstrated that the use of semi-automatic measurement technique offers a promising potential for the evaluation of forest road surface deformation.
Keywords
Forest roads,Surface degradation,Point cloud,SfM,Close-range photogrammetry
References
- Agisoft, 2016. Agisoft PhotoScan User Manual Professional Edition, Version 1.2. ed. St. Petersburg, Russia.
- Ahmed, M., Haas, C.T., Haas, R., 2011. Toward low-cost 3D automatic pavement distress surveying: the close range photogrammetry approach. Canadian Journal of Civil Engineering, 38(12): 1301-1313.
- Akay, A.E., Yuksel, A., Reis, M., Tutus, A., 2007. The impacts of ground-based logging equipment on forest soil. Polish Journal of Environmental Studies, 16(3):371.
- Akay, A.O., 2016. Determination of temporal changes on forest road pavement with terrestrial laser scanner. Master Thesis, Istanbul University, Institute of Graduate Studies in Science and Engineering, Department of Forest Engineering. Istanbul. 58 p.
- Akay, A.O., Akgul, M., Demir, M., 2018. Determination of temporal changes on forest road pavement with terrestrial laser scanner. Fresenius Environmental Bulletin, 27(3):1437-1448.
- Akgul, M., Akburak, S., Yurtseven, H., Akay, A. O., Cigizoglu, H. K., Demir, M., Ozturk, T., Eksi, M., 2019. Potential impacts of weather and traffic conditions on road surface performance in terms of forest operations continuity. Applied Ecology and Environmental Research, 17(2): 2533-2550.
- Akgul, M., Yurtseven, H., Akburak, S., Demir, M., Cigizoglu, H.K., Ozturk, T., Ekşi, M., Akay, A.O., 2017. Short term monitoring of forest road pavement degradation using terrestrial laser scanning. Measurement, 103: 283-293.
- Arıcak, B., Acar, H.H., 2008. The modeling of filling and construction ımpact areas in building forest roads by using quickbird satellite image. Kastamonu Univ., Journal of Forestry Faculty, 8(2): 144-156.
- Aricak, B., Genç, Ç.O., 2018. Technical efficiency evaluation of forest roads with respect to topographical factors and soil characteristics. Baltic Forestry, 24(1):123-130.
- Cambi, M., Giannetti, F., Bottalico, F., Travaglini, D., Nordfjell, T., Chirici, G., Marchi, E., 2018. Estimating machine impact on strip roads via close-range photogrammetry and soil parameters: a case study in central Italy. iForest-Biogeosciences and Forestry, 11(1): 148.
