Productivity Analysis of Front-end Loader in Timber Harvesting

Year 2020, , 7 - 13, 26.06.2020

Abdullah Emin Akay , Ebru Bilici , İnanç Taş , Hüseyin Fındık

https://doi.org/10.33904/ejfe.713860

Abstract

In this study, the productivity of front-end loader (Liebherr L 514 Stereo), which is one of the most used mechanized harvesting equipment in the production of forest products, was analyzed using time-study method. Factors influencing loader productivity were also evaluated by statistical analysis. Time measurements were carried out during forest harvesting operations in Topçam Forest Enterprise Chief in the city of Giresun. The results indicated that the most time-consuming stage of the loading operation was moving loaded to the logging truck, followed by moving unloaded to the side of the logs. According to the results, the average productivity of the loader was 34.27 m3/hr. Correlation test results showed that there was a positive correlation between productivity and log diameter and log volume, while there was no significant relationship between productivity and log length. The regression model developed with respect to the loader's productivity and specified log parameters (i.e. log diameter and log volume) was found to be significant and adequately explained the productivity of the loader. It was found that there was a significant relation between loader productivity and diameter classes and volume classes. It was also found that loader productivity increased as log diameter and log volume increases.

Keywords

Forest harvesting, mechanized loading, front-end loader, productivity

References

• Acar, H.H., Senturk, N., 2000. Mechanization in wood production operations in mountainous forest area, Journal of Faculty of Forestry Istanbul University, Sery: B, (46):77-94.
• Akay, A.E., Yuksel, A., Reis, M., Tutus, A., 2007. The impacts of ground-based logging equipment on forest soil, Polish Journal of Environmental Studies, 16(3):371-376.
• Carus, S., 2002. Comparison of some volume formulas regarding the stem, segments and fractions of the stem, Suleyman Demirel University Faculty of Forestry Journal, Seri A, (1):101-114.
• Coskun, K., Eroglu, H., Özkaya, M.S., Çetiner K., Bilgin, F., 2010. An assessment in terms of mechanization of timber harvesting operations in Artvin Forest Regional Directorate, 3. National Blacksea Forestry Congress, 20-22 May, Artvin.
• Eker, M., Acar, H.H., 2006. Development of annual operational planning model for timber harvesting, Suleyman Demirel University, Institute of Science Journal, 10-2:235-248.
• Eroglu, H., 2012. Effects of different logging techniques on forest soil compaction at mountainous terrain, Artvin Çoruh University Faculty of Forestry Journal, 13(2):213-225.
• Javadpour, A., 2006. Productivity and cost analysis of skidding and loading in designed and roadside landing, Msc Thesis, Guilan University, Iran, 85 p.
• Karaman, A., 1991. Investigating time, productivity, and cost of Liebher 902 during loading and piling of logs in forest depots. Msc Thesis, Trabzon. 103 p.
• Kewilaa, B., Tehupeiory, A., 2015. Effects of working time and the volume and weight of timber on productivity of log loader caterpillar type 966F and WL 980C. Wood Research Journal, 6(1):8-13.
• Kovácsová, P., Antalová, M., 2010. Precision forestry - definition and technologies. Journal of Forestry Society of Croatia, 134(11-12):603-611.
• Naghdi. R., 2005. Investigation and comparison of two harvesting systems: tree length and cut-to-length method in order to optimize road network planning in Neka, Iran. PhD Thesis, Tarbiat Modares University Tehran, 177 p.