INFLUENCE OF STATOR EMBRACE ON TORQUE OF IN-WHEEL SWITCHED RELUCTANCE MOTOR

Yıl 2017, Cilt: 7 Sayı: 2, 78 - 84, 30.11.2017

Merve Yıldırım , Hasan Kurum

Öz

In this paper, influence of stator pole embrace on torque of
In-Wheel Switched Reluctance Motor (IW-SRM) is investigated by numerical
modeling based on Finite Element Method (FEM). For this reason, 3D numerical
model of IW-SRM is built by using Ansys Maxwell Software Package. IW-SRM is
analyzed and output torque and magnetic flux density of the IW-SRM are
calculated. The analysis of IW-SRM is realized for different stator pole
embraces and the results of the output torque and magnetic flux density of
IW-SRM taken for various stator pole embraces are compared with each other. As
seen from the results, when the value of stator pole embrace reduces, the
output torque of IW-SRM increases. As a result in this study, the effects of
different stator pole embraces are examined on the output torque of IW-SRM.

Anahtar Kelimeler

In-Wheel Switched Reluctance Motor, Torque, Ansys Maxwell, Finite Element Method

Kaynakça

• [1] Yildirim, M., Polat, M., and Kürüm, H., A survey on comparison of electric motor types and drives used for electric vehicles, IEEE 16th International Power Electronics and Motion Control Conference and Exposition (PEMC), Antalya, Turkey, 2014, pp. 218-223.
• [2] Urbanski, K., and Krzysztof, Z., Sensorless control of SRM using position observer, IEEE European Conference on Power Electronics and Applications, 2007, pp. 1-6.
• [3] Omaç, Z., Polat, M., Öksüztepe, E., Yıldırım, M., Yakut, O., Eren, H., and Kürüm, H., Design, analysis, and control of in-wheel switched reluctance motor for electric vehicles, Electrical Engineering, (2017), pp. 1-12.
• [4] Chiang, C., Hsieh, M. F., Li, Y. H., and Tsai, M. C., Impact of electrical steel punching process on the performance of switched reluctance motors, IEEE Transactions on Magnetics, 51 (2015), 11, pp. 1-4.
• [5] Goto, H., Murakami, S., and Ichinokura, O., Design to maximize torque-volume density of axial-flux SRM for in-wheel EV, IEEE 41st Annual Conference of the Industrial Electronics Society (IECON), 2015, pp. 005191-005196.
• [6] Karim, K. A., Abdullah, N., Nazri, M., Othman, S. A. T., Firdaus, R. N., and Zainal, N. Z., Effect of poles embrace on switched reluctance motor design, Journal of Multidisciplinary Engineering Science Studies (JMESS), 3 (2017), 4, pp. 1661-1664.
• [7] Elamin, M., Yasa, Y., Sozer, Y., Kutz, J., Tylenda, J., & Wright, R. L. (2017, May). Effects of windows in stator and rotor poles of switched reluctance motors in reducing noise and vibration. In Electric Machines and Drives Conference (IEMDC), 2017 IEEE International (pp. 1-6). IEEE.
• [8] Gan, C., Wu, J., Shen, M., Yang, S., Hu, Y., & Cao, W. (2015). Investigation of skewing effects on the vibration reduction of three-phase switched reluctance motors. IEEE Transactions on Magnetics, 51(9), 1-9.
• [9] Smaka, S., Cosovic, M., & Masic, S. (2013, October). The effects of magnetic circuit geometry on torque generation of 8/14 switched reluctance machine. In Information, Communication and Automation Technologies (ICAT), 2013 XXIV International Symposium on (pp. 1-6). IEEE.
• [10] MašiĆ, Š., Smaka, S., Salihbegović, I., & Ćosović, M. (2011, May). The effects of magnetic circuit geometry on characteristics of switched reluctance motors. In Electric Machines & Drives Conference (IEMDC), 2011 IEEE International (pp. 1427-1432). IEEE.
• [11] Zhu, J., Cheng, K. W. E., and Xue, X., Torque analysis for in-wheel switched reluctance motors with varied number of rotor poles, IEEE International Symposium on Electrical Engineering (ISEE), 2016, pp. 1-5.