Computer aided numerical damage analysis of the axle shaft

Year 2022, , 201 - 206, 20.09.2022

Hamit Adin , Raşit Koray Ergün , Mehmet Şükrü Adin

https://doi.org/10.26701/ems.1109917

Cited By: 6

Abstract

Today, while transportation is constantly moving forward, costs are increasing. The aim is to obtain light structures that are suitable in terms of weight, sufficient in strength, and to save materials and energy. Axles are not only used in transport vehicles, but also in buses, automobiles and forklifts. Axles must be of a reliable structure due to their place of use. The external effects that the axles are generally exposed to are the applied loads. In this study, the mechanical damage analysis of the axle shaft and the characteristic changes in steel materials as a result of static loading were investigated numerically. In order to observe the mechanical behavior of the axle shaft under various loading conditions, mechanical tests should be supported by numerical analysis. Because the physical causes of damage development can be understood through numerical analysis. The aim of our study is to reach the most suitable values in the design of the variables with the optimization technique of the axle shaft made of AISI 1035 steel. Optimum values were obtained by performing numerical analyzes of the axle shaft designed with Solidworks program. As a result of the analysis, it was observed that deformation occurred at the ends of the axle.

Keywords

Static load, design, numerical analysis, axle.

References

• [1] Eryürek, B. (1993). Hasar Analizi. Birsen Yayınevi, İstanbul.
• [2] Eryürek, B., Dikicioğlu, A. (2003). Onarım Kaynağında Hasar Analizinin Önemi. Kaynak Teknolojisi IV. Ulusal Kong, p. 67-75.
• [3] Anonim, 2002. Failure Analysis and Prevention. ASM International, 11, 2910s, USA.
• [4] https://www.otoshops.com/aks-nedir-aks-arizasi-nasil-anlasilir-haber-474
• [5] Öndürücü, A., Kanbir, Ö. (2017). Bir greyderin dişli rotunun hasar analizi. Journal of Natural and Applied Sciences, 21(2): p. 599-606. DOI:10.19113/sdufbed.60153
• [6] Mercan, S. (2019). Failure analysis of weld joints, International Journal of Innovative Engineering Applications. 3(2): p. 67-75. https://dergipark.org.tr/tr/download/article-file/902803
• [7]. Dursun, T., Özbay, M. (2020). Cıvata bağlantılı tabakalı kompozit levhalarda hasar analizi. Pamukkale Univ Muh Bilim Derg, 26(4): p. 613-619. DOI: 10.5505/pajes.2020.99075
• [8] Turan, K., Kaman M.O. (2010). Tek tesirli yapıştırma bağlantılarında ilerlemeli hasar analizi. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 16(3): p. 315-323. https://kutuphane.dogus.edu.tr/mvt/pdf.php
• [9] Yalçın, B., Ergene, B., Nar, S. (2019) 1.2367 takım çeliğinden imal edilmiş enjeksiyon yolluk burcunda hasar analizi ve geometrik tasarımda iyileştirme ile hasarı önleme. International Journal of Technological Sciences, 11(3): p. 137‐146. https://dergipark.org.tr/tr/download/article-file/918011
• [10] Parnas, K.L. Erartsın, O., Atar, M.B., Tursun, G. (2015). Delikli kompozit yapıların sonlu elemanlar yöntemiyle analizi. XIX. Ulusal Mekanik Kongresi, p. 808-818.
• [11]. Şen., F, Pakdil., M. Moment (2007) Yükü altındaki tek cıvata bağlantılı tabakalı kompozit plakalarda hasar analizi. XV. Ulusal Mekanik Kongresi, p. 703-712.
• [12] https://web.itu.edu.tr/temizv/Sunular/Miller%20ve%20Akslar.pdf
• [13] http://www.nsccelik.com/islahcelikleri.html
• [14] http://www.netdemircelik.com.tr/urunler/karbonlu-celikler/index.html
• [15] https://www.hascometal.com/celiklerin-siniflandirilmasi/islah-celikleri 22-427.