Analysis and Joining of Al–Cu Plates Using Friction-Stir Welding Technique

Yıl 2018, Cilt: 2 Sayı: 1, 1 - 8, 20.03.2018

Ahmet Çakan , Hatice Atmaca Mustafa Uğurlu

https://doi.org/10.26701/ems.358729

Cited By: 9

Öz

The scope of the study focused on tool
speeds-plate temperatures at joining aluminium alloy and copper plates. The AA7075-T6 aluminium alloy
and pure copper were welded using friction-stir welding (FSW) technique. The
temperature variations of plates from stirred zone were detected using
thermocouples installed at equal distance on both sides of the axis of the pin linear displacement. The
temperature distribution in the surroundings of the welded zone was
investigated. The effects
of tool rotational speeds on plate temperatures were determined using such
welding parameters of three tool rotational
speeds of 660, 920 and 1500 rpm at a constant welding speed of 32 mm/min.

Anahtar Kelimeler

Welding, joining, friction, stir

Kaynakça

• [1] Khan N.Z., Siddiquee A.N., Khan Z.A. and Mukhopadhyay A.K., (2017) "Mechanical and microstructural behavior of friction stir welded similar and dissimilar sheets of AA2219 and AA7475 aluminium alloys", Journal of Alloys and Compounds,Vol: 695, pp.2902-2908.
• [2] Cam G.,Gucluer S., Cakan A. and Serindag H.T., (2009) "Mechanical properties of friction stirbutt-welded Al-5086 H32 plate", Materialwissenschaft und Werkstofftech, Vol:40, pp.638-642.
• [3] Shojaei Zoeram A., Mousavi Anidjan S.H., Jafarianb H.R. and Bhattacharjee T., (2017) "Welding parameters analysis and microstructural evolution of dissimilar joints in Al/Bronze processed by friction stir welding and their effect on engineering tensile behavior", Materials Science & Engineering A, Vol:687, pp.288–297.
• [4] Mehta K. P. and Badheka V. J., (2016) "A review on dissimilar friction stir welding of copper to aluminum: process, properties, and variants", Materials and Manufacturing Processes, Vol:31, pp.233–254.
• [5] Dorbane A., Mansoor B., Ayoub G., Shunmugasamy V.C. and Imad A., (2016) "Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061", Materials Science & Engineering A, Vol:651, pp.720–733.
• [6] Lee W.B., Schmuecker M., Mercardo U.A., Biallas G. and Jung S.B., (2006) "Interfacial reaction in steel-aluminum joints made by friction stir welding", Scripta Materialia, Vol:55, pp.355–358.
• [7] Lambrakos S.G., Fonda R.W., Milewski J.O. and Mitchell J.E., (2003) "Analysis of friction stir welds using thermocouple measurements", Science and Technology of Welding and Joining, Vol:8(5), pp.385–390.
• [8] Al-Roubaiy A. O., Nabat S. M. and Batako A.D. L., (2014) "Experimental and theoretical analysis of friction stir welding of Al–Cu joints",The International Journal of Advanced Manufacturing Technology, Vol:71, pp.1631–1642.
• [9] Song M. and KovacevicR., (2003) "Thermal modeling of friction stirwelding in a moving coordinate system and its validation", International Journal of Machine Tools and Manufacture, Vol:43, pp.605–615.
• [10] Chao Y. J., Asme M., X. Qi. and Tang W., (2003) "Heat Transfer in Friction Stir Welding-Experimental and Numerical Studies", Journal of Manufacturing Science and Engineering, Vol:125, pp.138-145.
• [11] Verma S, Meenu, Misra J P., "Study on temperature distribution during Friction Stir Welding of 6082 aluminum alloy", 5th International Conference of Materials Processing and Characterization : Materials Today. Proceedings; 2017; p. 1350–1356.
• [12] Mishra R., De P.S., and Kumar N., "Friction Stir Welding and Processing: Science and Engineering", Springer International Publishing, Switzerland, 2014; pp.13-58.
• [13] Durdanovic M. B., Mıjajlovic M. M., Milcic D. S. and Stamenkovic D. S., (2009) "Heat generation during friction stir welding process", Tribology in Industry, Vol:31, pp.8-14.
• [14] http://incialuminyum.com/mekanik-ozellikler.asp, 30/09/2017.