Araştırma Makalesi
BibTex RIS Kaynak Göster

Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in compliance with Photometric Requirements

Yıl 2019, Cilt: 3 Sayı: 1, 32 - 36, 20.03.2019

Hatice Özbek Caner Çil Ahmet Rodoplu

https://doi.org/10.26701/ems.450236

Öz

In
automotive lighting, external lighting functions in particular are subject to
international rules. It is essential that lighting functions should have been designed
in compliance with essential mechanical, optical, geometric and structural
criteria so that the same could be used on the vehicle. In this study, fog lamps,
which are used to improve lighting especially in cases of fog, snowfall, heavy
rain conditions are discussed for the safety of driver and the passengers. With
fog lamps in recent years, cornering function has also been combined in the
same equipment. In the current study, geometrical parameters were got for the
suitability of fog lamp and cornering lamp on the vehicle. Thus, a method was
obtained in order to reveal a product in compliance with legal requirements
just in the beginning of design development phase of all vehicles. Thanks to
this method, contribution was made to the design of other parts around the fog
lamp so that the same will not affect the vision for illumination.

Anahtar Kelimeler

Fog Lamp Cornering Automotive

Kaynakça

  • W. Hong, L. Xiufeng and G. Peng (2017). Design of an optical lens combined with a total internal reflection (TIR) free form surface for a LED front fog lamp. Optics & Laser Technology 88: 11–16
  • United Nations Economic Commission for Europe Vehicle Regulations (UNECE), Regulation No. 48 - Rev.12
  • United Nations Economic Commission for Europe Vehicle Regulations (UNECE), Regulation No. 119 - Rev.2
  • United Nations Economic Commission for Europe Vehicle Regulations (UNECE), Regulation No. 19 - Rev.7
  • M.M. Davoodi, S.M. Sapuan, A. Aidy, N.A. Abu Osman, A.A. Oshkour, W.A.B. Wan Abas (2012). Development process of new bumper beam for passenger car: A review. Materials and Design 40: 304–313
  • H. Ozbek, C. Cil, A. Rodoplu, S. Dogru (2017). Ground clearance control and its importance of automotive lighting functions with respect to changes in weight and loads of vehicles. 11th National Lighting Conference.

Yıl 2019, Cilt: 3 Sayı: 1, 32 - 36, 20.03.2019

Hatice Özbek Caner Çil Ahmet Rodoplu

https://doi.org/10.26701/ems.450236

Öz

Kaynakça

  • W. Hong, L. Xiufeng and G. Peng (2017). Design of an optical lens combined with a total internal reflection (TIR) free form surface for a LED front fog lamp. Optics & Laser Technology 88: 11–16
  • United Nations Economic Commission for Europe Vehicle Regulations (UNECE), Regulation No. 48 - Rev.12
  • United Nations Economic Commission for Europe Vehicle Regulations (UNECE), Regulation No. 119 - Rev.2
  • United Nations Economic Commission for Europe Vehicle Regulations (UNECE), Regulation No. 19 - Rev.7
  • M.M. Davoodi, S.M. Sapuan, A. Aidy, N.A. Abu Osman, A.A. Oshkour, W.A.B. Wan Abas (2012). Development process of new bumper beam for passenger car: A review. Materials and Design 40: 304–313
  • H. Ozbek, C. Cil, A. Rodoplu, S. Dogru (2017). Ground clearance control and its importance of automotive lighting functions with respect to changes in weight and loads of vehicles. 11th National Lighting Conference.
Toplam 6 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Makine Mühendisliği
Bölüm Research Article
Yazarlar

Hatice Özbek 0000-0002-8271-284X

Caner Çil Bu kişi benim 0000-0003-0164-4636

Ahmet Rodoplu 0000-0002-2764-0978

Yayımlanma Tarihi 20 Mart 2019
Kabul Tarihi 23 Kasım 2018
Yayımlandığı Sayı Yıl 2019 Cilt: 3 Sayı: 1

Kaynak Göster

APA Özbek, H., Çil, C., & Rodoplu, A. (2019). Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in compliance with Photometric Requirements. European Mechanical Science, 3(1), 32-36. https://doi.org/10.26701/ems.450236
AMA Özbek H, Çil C, Rodoplu A. Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in compliance with Photometric Requirements. EMS. Mart 2019;3(1):32-36. doi:10.26701/ems.450236
Chicago Özbek, Hatice, Caner Çil, ve Ahmet Rodoplu. “Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in Compliance With Photometric Requirements”. European Mechanical Science 3, sy. 1 (Mart 2019): 32-36. https://doi.org/10.26701/ems.450236.
EndNote Özbek H, Çil C, Rodoplu A (01 Mart 2019) Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in compliance with Photometric Requirements. European Mechanical Science 3 1 32–36.
IEEE H. Özbek, C. Çil, ve A. Rodoplu, “Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in compliance with Photometric Requirements”, EMS, c. 3, sy. 1, ss. 32–36, 2019, doi: 10.26701/ems.450236.
ISNAD Özbek, Hatice vd. “Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in Compliance With Photometric Requirements”. European Mechanical Science 3/1 (Mart 2019), 32-36. https://doi.org/10.26701/ems.450236.
JAMA Özbek H, Çil C, Rodoplu A. Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in compliance with Photometric Requirements. EMS. 2019;3:32–36.
MLA Özbek, Hatice vd. “Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in Compliance With Photometric Requirements”. European Mechanical Science, c. 3, sy. 1, 2019, ss. 32-36, doi:10.26701/ems.450236.
Vancouver Özbek H, Çil C, Rodoplu A. Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in compliance with Photometric Requirements. EMS. 2019;3(1):32-6.

Dergi TR Dizin'de Taranmaktadır.

Flag Counter