Friction and Wear Behavior of Fiber Reinforced Polymer-Matrix Composites Containing Ulexite and Pinus Brutia Cone Dust

Year 2019, Volume: 3 Issue: 3, 92 - 96, 20.09.2019

Banu Sugözü

https://doi.org/10.26701/ems.513856

Cited By: 1

Abstract

In this study, the usability of ulexite and pinus brutia cone dust (PBCD) in friction composites were investigated experimentally. Polymer-matrix composite (PMC) samples were manufactured by powder metallurgy method. Produced samples with the same contents were compared with those of heat-treated. A special design friction tester was used to determine friction properties such as wear rate and friction coefficient. The results showed that ulexite and PBCD can be used as filler material in friction composites. The results also indicated that heat treatment improved the properties of the samples.

Keywords

friction, wear, ulexite, pinus brutia cone dust, brake

References

• Öztürk, B., Arslan, F., Öztürk, S., (2013). Effects of Different Kinds of Fibers on Mechanical and Tribological Properties of Brake Friction Materials. Tribology Transactions 56(4): 536–45, Doi: 10.1080/10402004.2013.767399.
• Singh, T., Patnaik, A., (2015). Performance assessment of lapinus-aramid based brake pad hybrid phenolic composites in friction braking. Archives of Civil and Mechanical Engineering 15(1): 151–61, Doi: 10.1016/j.acme.2014.01.009.
• Nirmal, U., Hashim, J., Megat Ahmad, M.M.H., (2015). A review on tribological performance of natural fibre polymeric composites. Tribology International: 77–104, Doi: 10.1016/j.triboint.2014.11.003.
• Ikpambese, K.K., Gundu, D.T., Tuleun, L.T., (2016). Evaluation of palm kernel fibers (PKFs ) for production of asbestos-free automotive brake pads. Journal of King Saud University - Engineering Sciences 28(1): 110–8, Doi: 10.1016/j.jksues.2014.02.001.
• Xin, X., Xu, C.G., Qing, L.F., (2007). Friction properties of sisal fibre reinforced resin brake composites. Wear 262(5–6): 736–41, Doi: 10.1016/j.wear.2006.08.010.
• Bijwe, J., Kumar, M., (2007). Optimization of steel wool contents in non-asbestos organic ( NAO ) friction composites for best combination of thermal conductivity and tribo-performance 263: 1243–8, Doi: 10.1016/j.wear.2007.01.125.
• Satapathy, B.K., Bijwe, J., (2004). Performance of friction materials based on variation in nature of organic fibres Part I. Fade and recovery behaviour. Wear 257(5–6): 573–84, Doi: 10.1016/j.wear.2004.03.003.
• Zhang, X., Li, K.-Z., Li, H.-J., Fu, Y.-W., Fei, J., (2014). Tribological and mechanical properties of glass fiber reinforced paper-based composite friction material. Tribology International 69: 156–67, Doi: 10.1016/j.triboint.2013.08.003.
• Jang, H., Ko, K., Kim, S.., Basch, R.., Fash, J.., (2004). The effect of metal fibers on the friction performance of automotive brake friction materials. Wear 256(3–4): 406–14, Doi: 10.1016/S0043-1648(03)00445-9.
• Qu, X., Zhang, L., Ding, H., Liu, G., (2004). The Effect of Steel Fiber Orientation on Frictional Properties of Asbestos-Free Friction Materials. Polymer Composites 25(1): 94–101.
• Aranganathan, N., Mahale, V., Bijwe, J., (2016). Effects of aramid fiber concentration on the friction and wear characteristics of non-asbestos organic friction composites using standardized braking tests. Wear 354–355: 69–77, Doi: 10.1016/j.wear.2016.03.002.
• Fei, J., Li, H.-J., Fu, Y.-W., Qi, L.-H., Zhang, Y.-L., (2010). Effect of phenolic resin content on performance of carbon fiber reinforced paper-based friction material. Wear 269(7–8): 534–40, Doi: 10.1016/J.WEAR.2010.05.008.
• Satapathy, B.K., Patnaik, A., Dadkar, N., Kolluri, D.K., Tomar, B.S., (2011). Influence of vermiculite on performance of flyash-based fibre-reinforced hybrid composites as friction materials. Materials and Design 32(8–9): 4354–61, Doi: 10.1016/j.matdes.2011.04.004.
• Lenin Singaravelu, D., Vijay, R., Rahul, M., (2015). Influence of Crab Shell on Tribological Characterization of Eco-Friendly Products Based Non Asbestos Brake Friction Materials. SAE Brake Colloquium & Exhibition - 33rd Annual,.
• Antonyraj, J.I., Vijay, R., Singaravelu, L.D., (2019). Industrial Lubrication and Tribology Influence of WS 2 /SnS 2 on the tribological performance of copper-free brake pads Article information. Industrial Lubrication and Tribology, Doi: 10.1108/ILT-06-2018-0249.
• Öztürk, B., Mutlu, T., (2016). Effects of Zinc Borate and Fly Ash on the Mechanical and Tribological Characteristics of Brake Friction Materials. Tribology Transactions 59(4): 622–31, Doi: 10.1080/10402004.2015.1096984.
• Jeganmohan, S., Christy, T.V., Darius Gnanaraj, S., Sugozu, B., (2019). Influence of calcium sulfate whiskers on the tribological characteristics of automotive brake friction materials. Engineering Science and Technology, an International Journal, Doi: 10.1016/J.JESTCH.2019.06.007.
• Akıncıoğlu, G., Öktem, H., Uygur, I., Akıncıoğlu, S., (2018). Determination of Friction-Wear Performance and Properties of Eco-Friendly Brake Pads Reinforced with Hazelnut Shell and Boron Dusts. Arabian Journal for Science and Engineering 43: 4727–37, Doi: 10.1007/s13369-018-3067-8.
• Uygunoğlu, T., Brostow, W., Gunes, I., Uygunoğlu, T., Brostow, W., Gunes, I., (2015). Wear and friction of composites of an epoxy with boron containing wastes. Polímeros 25(3): 271–6, Doi: 10.1590/0104-1428.1780.
• Wannik, W.B., Ayob, A.F., Syahrullail, S., Masjuki, H.H., Ahmad, M.F., (2012). The effect of boron friction modifier on the performance of brake pads. International Journal of Mechanical and Materials Engineering 7(1): 31–5.
• Mutlu, I., Oner, C., Findik, F., (2007). Boric acid effect in phenolic composites on tribological properties in brake linings 28(2): 480–7.
• Sugozu, I., Mutlu, I., Sugozu, K.B., (2016). The effect of colemanite on the friction performance of automotive brake friction materials. Industrial Lubrication and Tribology 68(1): 92–8, Doi: 10.1108/ILT-04-2015-0044.
• Sugozu, I., Mutlu, I., Sugozu, B., (2018). The effect of ulexite to the tribological properties of brake lining materials. Polymer Composites 39(1): 55–62, Doi: 10.1002/pc.23901.
• TSE 555., (1992). Highway Vehicles-Brake System-Brake Pads for Friction Brake. Ankara, Turkey.
• TSE 9076., (1991). Evaluation of Material Friction Properties with Small Experimental Parts-Brake Systems-Brake Pads.
• Hwang, H.J., Jung, S.L., Cho, K.H., Kim, Y.J., Jang, H., (2010). Tribological performance of brake friction materials containing carbon nanotubes. Wear 268(3–4): 519–25, Doi: 10.1016/J.WEAR.2009.09.003.
• Düzcükoğlu, H., Ekinci, Ş., Şahin, Ö.S., Avci, A., Ekrem, M., Ünaldi, M., (2015). Enhancement of Wear and Friction Characteristics of Epoxy Resin by Multiwalled Carbon Nanotube and Boron Nitride Nanoparticles. Tribology Transactions 58(4): 635–42, Doi: 10.1080/10402004.2014.998358.
• Cho, K.H., Jang, H., Hong, Y.S., Kim, S.J., Basch, R.H., Fash, J.W., (2008). The size effect of zircon particles on the friction characteristics of brake lining materials. Wear 264(3–4): 291–7, Doi: 10.1016/j.wear.2007.03.018.