Influence Of Pressing Time On Physical And Mechanical Properties Of Particleboards Made From Scots Pine (Pinus sylvestris L.)

Yıl 2020, Cilt: 4 Sayı: 2, 78 - 81, 20.06.2020

Miglena Valyova Daniel Koynov

https://doi.org/10.26701/ems.532796

Öz

This study presents the results of
investigations on some physical and mechanical properties of one-layer
particleboards made from Scots
pine (Pinus sylvestris L.). The size and  the ratio of the using particles were: 0.5-1 mm- 20 %, 1-3 mm- 60 % and 3-5 mm-20 %, respectively. Urea-formaldehyde resin was used as a binder. The effect of
different pressing time- 15, 30, 60 and 90 s.mm^-1 on the some properties, such as: density, moisture content, water
absorption, thickness
swelling and bending strength
according to appropriate standards was evaluated. The best results were observed
at pressing time of 60 and 90 s.mm^-1. The particleboards obtained under these
conditions can be used in the furniture industry.

Anahtar Kelimeler

particleboards, urea-formaldehyde resin (UF), physical properties

Kaynakça

• [1] Sellers, T. (2000). Growing markets for engineered products spurs research. Wood Technology, 127 (3): 40–43.
• [2] Tas, H. H., Sevincli, Y. (2015). Properties of particleboard produced from red pine (Pinus brutia) chips and lavender stems. BioResources, 10 (4): 7865-7876.
• [3] Maloney, T. M. (1993). Modern particleboard and dry process fiberboard manufacturing. Miller Freeman Publ, San Francisco.
• [4] Wang, D., Sun, X. S. (2002). Low density particleboard from wheat straw and corn pith. Industrial Crops and Products, 15 (1): 43-50, https://doi.org/10.1016/S0926-6690(01)00094-2.
• [5] Kord, B., Roohani, M., Kord, B. (2015). Characterization and utilization of reed stem as alignocellulosic resource for particleboard production. Maderas. Ciencia y tecnología, 17 (3): 517-524, http://dx.doi.org/10.4067/S0718-221X2015005000046.
• [6] Valarelli, I., Battistelle, R., Bueno, M., Bezerra, B., Campos, C., Alves, M. (2014). Physical and mechanical properties of particleboard bamboo waste bonded with urea formaldehyde and castor oil based adhesive. Revista Matéria, 19 (1): 1-6, http://dx.doi.org/10.1590/S1517-70762014000100002.
• [7] Merrild, H., Christensen, T. H. (2009). Recycling of wood for particle board production: accounting of greenhouse gases and global warming contributions. Waste Management & Research, 27 (8): 781-788, DOI: 10.1177/0734242X09349418.
• [8] Ganne-Chédeville, C., Diederichs, S. (2015). Potential environmental benefits of ultralight particleboards with biobased foam cores. International Journal of Polymer Science, Vol. 2015, 14 pages, http://dx.doi.org/10.1155/2015/383279.
• [9] Németh, G. (2009). Handling and recycling of waste in wood industry, Ph.D. Thesis, University of West Hungary.
• [10] Kamikawa, D., Kuroda, K., Inoue, M., Kubo, S., Yoshida, T. (2009). Evaluation of combustion properties of wood pellets using a cone calorimeter. Journal of Wood Science, 55 (6): 453–457, https://doi.org/10.1007/s10086-009-1061-1.
• [11] Melo, R. R., Stangerlin, D. M., Santana, R. R. C., Pedrosa, T. D. (2014). Physical and mechanical properties of particleboard manufactured from wood, bamboo and rice husk. Materials Research, 17 (3): 682-686, http://dx.doi.org/10.1590/S1516-14392014005000052.
• [12] Palo, M., Uusivuori, J. (2012). World forests, society and environment. Springer Science & Business Media.
• [13] Skog, K., Ince, P., Dietzman, D., Ingram, C. (1995). Wood products technology trends. Changing the face of forestry. Journal of Forestry, 93 (12): 30-33.
• [14] Tabarsa, T., Khanjanzadeh, H., Pirayesh, H. (2011). Key Engineering Materials, 471-472: 62-66, https://doi.org/10.4028/www.scientific.net/KEM.471-472.62.
• [15] Antonovic, A., Jambrekovic, V., Kljak, J., Spanic, N., Medved, S. (2010). Influence of urea-formaldehyde resin modification with liquefied wood on particleboard properties. Drvna Industrija, 61 (1): 5-14, https://hrcak.srce.hr/49202.
• [16] Oliveira, S. L., Mendes, R. F., Mendes, L. M., Freire, T. P. (2016). Particleboard panels made from sugarcane bagasse: characterization for use in the furniture industry. Materials Research, 19 (4): 914-922, http://dx.doi.org/10.1590/1980-5373-MR-2015-0211.
• [17] Savov, V. (2014). Effect of temperature and duration of hot-pressing on main properties of light MDF. Woodworking industry and furniture manufacturing, 1: 34-39, Sofia. ISSN 1311-4972.
• [18] Muruganandam, L., Ranjitha, J., Harshavardhan, A. (2016). A review report on physical and mechanical properties of particle boards from organic waste. International Journal of ChemTech Research, 9 (1): 64-72, ISSN: 0974-4290.
• [19] Candan, Z., Akbulut, T. (2015). Physical and mechanical properties of nanoreinforced particleboards composites. Maderas Ciencia y Tecnología, 17 (2): 319 – 334, ISSN 0718-221X. http://dx.doi.org/10.4067/S0718-221X2015005000030.
• [20] Batiancela, M. A., Acda, M. N., Cabangon, R. J. (2014). Particleboard from waste tea leaves and wood particles. Journal of Composite Materials, 48 (8): 911-916, https://doi.org/10.1177/0021998313480196.
• [21] Taghiyari, H. R., Rangavar, H., Bibalan, O. F. (2011). Effect of nano-silver on reduction of hot pressing time and improvement in physical and mechanical properties of particleboard. BioResources, 6 (4): 4067-4075.
• [22] BDS EN 323: 2001 “Wood-based panels - Determination of density”.
• [23] BDS EN 326-1: 2001 “Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results”.
• [24] BDS EN 317:1993 “Particleboards and fibreboards. Determination of swelling in thickness after immersion in water”.
• [25] BDS EN 310:1999 “Wood-based panels - Determination of modulus of elasticity in bending and of bending strength”.