Effect of heat treatment on the performance of 30MnB4 steel for being used as grade 10.9 bolt material

Year 2023, Volume: 7 Issue: 3, 172 - 177, 20.09.2023

Onur Güven , Yasemin Erdogan

https://doi.org/10.26701/ems.1311052

Abstract

Due to technological advancements, alloy steels are now widely used in producing high-strength bolts through various heat treatments. One of the essential features desired in bolts is their strength, as they are subject to heavy loads. This strength is referred to as bolt quality, and interest in heat treatment methods applied to increase the strength of alloy steels is increasing. The mechanical properties achieved from different heat treatment methods and chemical compositions vary. This study aimed to impart the mechanical properties of grade 10.9 steel bolts onto 30MnB4 steel by applying different heat treatments. The effects of tempering temperature on tensile strength, yield strength, elongation at break, reduction in cross-sectional area at break, hardness, and notch impact values at -20°C were examined by passing the prepared samples through five different tempering processes after preheating, annealing and quenching processes. The results revealed that the mechanical properties of grade 10.9 steel bolts were imparted to 30MnB4 steel at all tempering temperatures applied within the scope of the study. Yield strength, tensile strength, hardness, and -20°C notch impact values increased as tempering temperature decreased, while elongation at break decreased. This study adds 30MnB4 steel to the literature as an alternative material that can be used to produce grade 10.9 steel bolts. In addition, mechanical properties obtained depending on tempering temperatures have also revealed the usability of 30MnB4 steel for different applications requiring high strength and toughness values.

Keywords

30MnB4 steel, Grade 10.9 steel bolt, Heat treatment, Tempering, Mechanical properties.

References

• [1] Avner, S.H. (2015). Introduction to Physical Metallurgy, McGraw-Hill Book Company.
• [2] Davis, J.R. (1994). ASM Specialty Handbook: Stainless Steels, ASM International.
• [3] Menzemer, C.C., Srivatsan, T.S., Ortiz, R., Al-Hajri, M., Petraroli, M. (2001). Influence of temperature on impact fracture behavior of an alloy steel. Materials & Design, 22(8): 659-667. https://doi.org/10.1016/S0261-3069(01)00011-5
• [4] Frihat, M.H. (2015). Effect of heat treatment parameters on the mechanical and microstructure properties of low-alloy steel. Journal of Surface Engineered Materials and Advanced Technology, 05(04): 214227. https://doi.org/10.4236/JSEMAT.2015.54023.
• [5] El-Shennawy, M., Farahat, A.I., Masoud, M.I., Abdel-Aziz, A.I. (2016). Effect of boron content on metallurgical and mechanical characteristics of low carbon steel, International Journal of Mechanical Engineering, 5(2):1-14.
• [6] Cannon, W.F. (2014). Manganese: It turns iron into steel (and does so much more). USGS Mineral Resources Program, Fact Sheet 2014-3087, U.S. Geological Survey. https://doi.org/10.3133/fs20143087.
• [7] Oruç, M., Durakovic, J., Muhamedagic, S., Fakic, B. i Rimac, M. (2016). Effects of heat treatment on the properties of low carbon steel 19MnB4 for screws. Metalurgija, 55(2): 193-196. https://hrcak.srce.hr/146494.
• [8] Erdogan, Y. (2022). Cr-Mo elementleri ile modifiye edilmiş 42CrMo4 ve 30MnB4 çeliklerde ısıl işlemin mekanik özelliklere etkisi. M.Sc. Thesis, Mersin University.
• [9] Arman, M.A. (2017). Farklı oranlarda mikro alasım bor içerikli aısı 4140 çeliginin asınma davranısının arastırılması. M.Sc. Thesis, Nevsehir Haci Bektas Veli University.
• [10] Carboga, C., Kurt, B., Dal, S. (2016). The effect of heat treatment methods on different rates boron added AISI 4140 improve steel. Nevşehir Bilim ve Teknoloji Dergisi, 5(2): 117-123, https://doi.org/10.17100/NEVBILTEK.284735
• [11] Haracic, N. (2002). Bor and boron low alloyed steels for carburisation and direct quenching. Masinstvo, 4(6): 215-226.
• [12] Krawczyk, J, Frocisz, P. B. L., Tokarski, T. And Pawłowski, B. (2015). The influence of microstructure of 30MnB4 steel on hydrogen-assisted cracking ,Metallurgy and Foundry Engineering , 41(4): 171–180.
• [13] Bozca, M. And Kinit U. (2020). Reliability analysis of the mechanical properties of 30mnb4 high strength steel bolts under static loading conditions, Sigma J Eng & Nat Sci 38 (2): 495-512.
• [14] Zhu P., Li Y., Cui, H. and Zhang, D. (2017). Effects of quenching temperature on tempering microstructure and mechanical properties of 30MnB steel,IOP Conf. Series: Materials Science and Engineering, 274: 012060 doi:10.1088/1757-899X/274/1/012060
• [15] Khoma, M., Vynar, V., Vasyliv, C., Zakiev, V., Datsko, B., Golovchuk, M., (2022). Influence of heat treatment of 30MnB5 steel on its micromechanical properties and resistance to abrasion wear. Tribology in Industry, 22(2): 310-321. https://doi.org/10.24874/ti.1146.06.21.02.
• [16] ISO 898-1:2013. (2013). Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread. ISO International Organization for Standardization. https://www.iso.org/standard/60610.html
• [17] ISO 148-1:2016. (2016). Metallic materials - Charpy pendulum impact test - Part 1: Test method ISO. International Organization for Standardization. https://www.iso.org/obp/ui/#iso:std:iso:148:-1:ed-3:v1:en
• [18] ISO 6892-1:2019. (2019). Metallic materials - Tensile testing - Part 1: Method of test at room temperature. ISO International Organization for Standardization. https://www.iso.org/standard/78322.html
• [19] DIN EN 10263-4. (2018). Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering. Standard. European Standards. https://www.en-standard.eu/din-en-10263-4-steel-rod-bars-and-wire-for-cold-heading-and-cold-extrusion-part-4-technical-delivery-conditions-for-steels-for-quenching-and-tempering/?gclid=Cj0KCQjwu-KiBhCsARIsAPztUF3XY3zBARjBVOF-wQmUH7c506bQQCT_Upa1FO2G4a0mRpkb5PdNuWwaArq9EALw_wcB
• [20] ASTM A370-22. Standard test methods and definitions for mechanical testing of steel products. ASTM Standards. https://www.astm.org/standards/a370