Araştırma Makalesi
BibTex RIS Kaynak Göster

Numerical Analysis of the Behavior of Structures Damaged by Fatigue and Repaired by Composite Patch

Yıl 2018, Sayı: 4, 35 - 42, 04.12.2018

Öz

In
this paper, a numerical study of the behavior of fatigue cracks of damaged
composite repaired aeronautical structures was presented. Various parameters
have been highlighted such as effect of the dimensions and mechanical
properties of the patch as well as the orientation of the fibers and the effect
of the dimensions and mechanical properties of the adhesive. Two geometrical
models have been proposed in order to see the influence of the crack position
and the overall failure behavior under fatigue stress of the damaged structure.
The results on the different geometric models of cracked plates and fissure
plates from nicks show that composite patch repair is an effective technique
for increasing plate strength, decreasing stress concentration and prolonging
their service life.

Kaynakça

  • Içten, B.M. and Karakuzu, R. (2002), The Effect of Composite Patches on the Failure of Adhesively-Bonded Joints Under Bending Moment. Compos. Sci. Technol., 62, 1259-1271. Elhannani, M., Madani, K., Mokhtari, M., Touzain, S., Feaugas, X. and Cohendoz, S. (2016), “A new analytical approach for optimization design of adhesively bonded single-lap joint”, Struct. Eng. Mech., 59(2), 313-326. Benchiha, A. and Madani, K. (2015), “Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint”, Struct. Eng. Mech., 53(5), 1017-1030. Benchiha, A., Madani, K., Touzain, S., Feaugas, X. and Ratwani, M. (2016), “Numerical analysis of the influence of the presence of disbond region in adhesive layer on the stress intensity factors (SIF) and crack opening displacement (COD) in plates repaired with a composite patch”, Steel Compos. Struct., 20(4), 951-962. Erdogan, F. and Ratwani, M. (1971), “Stress distribution in bonded joints”, J. Compos. Mater., 5(3), 378- 393. Costa, T.R.F. Serrano, A.M., Atman, A.P.F., Loguercio, A.D. and Reis, A. (2012), “Durability of composite repair using different surface treatments”, J. Dentist., 40(6), 513-521. Fekirini, H.; Bachir Bouiadjra , B.; Belhouari, M.; Boutabout, B.; Serier, B. (2008), Numerical analysis of the performances of bonded composite repair with two adhesive bands in aircraft structures, Composite structures, 82:84-89 Bachir Bouiadjra, B.B.; Fekirini, H.; Serir, B.; Belhouari, M.; and Benguediab, M. (2008), Energy Release Rate for Repaired Inclined Cracks with Bonded Composite Patch Having Two Adhesive Bands in Aircraft Structures, Journal of reinforced plastic and composites, 28:1135-1146. Heller, M.; Kaye, R. (2002); Shape Optimisation for Bonded Repairs, Advances in the Bonded Composite Repair of Metallic Aircraft Structure, Pages 269-315 Kaddouri, K.; Ouinas, D.; Bachir Bouiadjra, B. (2008); FE analysis of the behaviour of octagonal bonded composite repair in aircraft structures, Computational Materials Science, 43:1109-1111 Ouinas, D.; Hebbar, A.; Bachir Bouiadjra, B.; Belhouari, M.; Serier, B. (2009); Numerical analysis of the stress intensity factors for repaired cracks from a notch with bonded composite semicircular patch, Composites Part B: Engineering, 40: 804-810 Bachir Bouiadjra, B.; Fekirini, H.; Serier, B.; and Benguediab, M. (2007); SIF for Inclined Cracks Repaired with Double and Single Composite Patch, Mechanics of Advanced Materials and Structures, 14:303–308 Belhouari, M.; Bachir Bouiadjra, B.; Megueni, A.; Kaddouri, K. (2004); Comparison of double and single bonded repairs to symmetric composite structures: a numerical analysis, Composite Structures, 65: 47-53 Bachir Bouiadjra, B.; Achour, T.; Berrahou, M.; Ouinas, D.; Feaugas, X (2010).; Numerical estimation of the mass gain between double symmetric and single bonded composite repairs in aircraft structures, Materials & Design, 31: 3073-3077
Yıl 2018, Sayı: 4, 35 - 42, 04.12.2018

Öz

Kaynakça

  • Içten, B.M. and Karakuzu, R. (2002), The Effect of Composite Patches on the Failure of Adhesively-Bonded Joints Under Bending Moment. Compos. Sci. Technol., 62, 1259-1271. Elhannani, M., Madani, K., Mokhtari, M., Touzain, S., Feaugas, X. and Cohendoz, S. (2016), “A new analytical approach for optimization design of adhesively bonded single-lap joint”, Struct. Eng. Mech., 59(2), 313-326. Benchiha, A. and Madani, K. (2015), “Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint”, Struct. Eng. Mech., 53(5), 1017-1030. Benchiha, A., Madani, K., Touzain, S., Feaugas, X. and Ratwani, M. (2016), “Numerical analysis of the influence of the presence of disbond region in adhesive layer on the stress intensity factors (SIF) and crack opening displacement (COD) in plates repaired with a composite patch”, Steel Compos. Struct., 20(4), 951-962. Erdogan, F. and Ratwani, M. (1971), “Stress distribution in bonded joints”, J. Compos. Mater., 5(3), 378- 393. Costa, T.R.F. Serrano, A.M., Atman, A.P.F., Loguercio, A.D. and Reis, A. (2012), “Durability of composite repair using different surface treatments”, J. Dentist., 40(6), 513-521. Fekirini, H.; Bachir Bouiadjra , B.; Belhouari, M.; Boutabout, B.; Serier, B. (2008), Numerical analysis of the performances of bonded composite repair with two adhesive bands in aircraft structures, Composite structures, 82:84-89 Bachir Bouiadjra, B.B.; Fekirini, H.; Serir, B.; Belhouari, M.; and Benguediab, M. (2008), Energy Release Rate for Repaired Inclined Cracks with Bonded Composite Patch Having Two Adhesive Bands in Aircraft Structures, Journal of reinforced plastic and composites, 28:1135-1146. Heller, M.; Kaye, R. (2002); Shape Optimisation for Bonded Repairs, Advances in the Bonded Composite Repair of Metallic Aircraft Structure, Pages 269-315 Kaddouri, K.; Ouinas, D.; Bachir Bouiadjra, B. (2008); FE analysis of the behaviour of octagonal bonded composite repair in aircraft structures, Computational Materials Science, 43:1109-1111 Ouinas, D.; Hebbar, A.; Bachir Bouiadjra, B.; Belhouari, M.; Serier, B. (2009); Numerical analysis of the stress intensity factors for repaired cracks from a notch with bonded composite semicircular patch, Composites Part B: Engineering, 40: 804-810 Bachir Bouiadjra, B.; Fekirini, H.; Serier, B.; and Benguediab, M. (2007); SIF for Inclined Cracks Repaired with Double and Single Composite Patch, Mechanics of Advanced Materials and Structures, 14:303–308 Belhouari, M.; Bachir Bouiadjra, B.; Megueni, A.; Kaddouri, K. (2004); Comparison of double and single bonded repairs to symmetric composite structures: a numerical analysis, Composite Structures, 65: 47-53 Bachir Bouiadjra, B.; Achour, T.; Berrahou, M.; Ouinas, D.; Feaugas, X (2010).; Numerical estimation of the mass gain between double symmetric and single bonded composite repairs in aircraft structures, Materials & Design, 31: 3073-3077
Toplam 1 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Makaleler
Yazarlar

Habib Achache

Djaafar Aıtkacı

Abdelmajid Moulgada

Yayımlanma Tarihi 4 Aralık 2018
Yayımlandığı Sayı Yıl 2018Sayı: 4

Kaynak Göster

APA Achache, H., Aıtkacı, D., & Moulgada, A. (2018). Numerical Analysis of the Behavior of Structures Damaged by Fatigue and Repaired by Composite Patch. The Eurasia Proceedings of Science Technology Engineering and Mathematics(4), 35-42.