Manufacturing Removable Partial Dentures by Digital Methods
Year 2025,
Volume: 9 Issue: 2, 134 - 141, 29.08.2025
Sinem İşler
,
Şebnem Begüm Türker
Abstract
Some problems on design and production stage during the construction of conventional partial removable dentures could be solved with today's technology.
Nowadays, digital techniques have reformed the production of partial removable dental prostheses (PRDPs). Recently, several digital methods are available in the request for RPD product including subtractive and additive techniques. Digital techniques increase the variety of materials that can be used for RPD production. The aim of this article was give information about the clinical application of the removable partial protheses produced by digital methods.
References
-
Açıkalın A, Budak E, Uçar Y. Geleneksel Döküm ve Kopya Milleme Yöntemleri ile Hazırlanan Metal Altyapıların İç Uyumlarının Karşılaştırılması. Gazi Üniversitesi Dişhekimliği Fakültesi Derg. 2011; 28(3):169–76.
-
Al-Haj Husain N., Ozcan M., Schimmel M., Abou-Ayash S. A digital cast-free clinical workflow for oral rehabilitation with removable partial dentures: A dental technique. J Prosthet Dent. 2020;123:680–685.
-
Ali, Z., Baker, S., Sereno, N., & Martin, N. A Pilot Randomized Controlled Crossover Trial Comparing Early OHRQoL Outcomes of Cobalt-Chromium Versus PEEK Removable Partial Denture Frameworks. Int J Prosthodont. 2020; 33(4): 386-392.
-
Almufleh, B., Arellanob, A., & Tamimi, F. Patient-reported outcomes and framework fit accuracy of removable partial dentures fabricated using digital techniques: A systematic review and meta-analysis. J. prosthodont.2024; 33(7), 626–636.
-
Apak S. Farklı Hızlı Prototipleme Cihazlarında Üretilen Parçaların Üretim Zamanı ve Maliyet Açısından Karşılaştırılması. Yüksek Lisans Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara; 2010. ss 1-42. ( Danışman: Prof. Dr. Kürşad Dündar)
-
Aretxabaleta, M., Unkovskiy, A., Koos, B., Spintzyk, S., & Xepapadeas, A. B.Comparison of additive and subtractive CAD/CAM materials for their potential use as Tübingen Palatal Plate: An in-vitro study on flexural strength. Additive Manufacturing. 2021, 8 (37): 101693.
-
Arnold, C., Hey, J., Schweyen, R., & Setz, J. M.. Accuracy of CAD-CAM-fabricated removable partial dentures. J Prosthet Dent. 2018; 119(4): 586-592.
-
Azeez G., Çekiç Nagaş I. Protetik Diş Hekimliğinde Kullanılan Metal Üretim Tekniklerinde Güncel Gelişmeler. EÜ Dişhek Fak Derg 2017; 38: 128–139.
-
Berger JC, Driscoll CF. Rehabilitation of a spark erosion prosthesis: a clinical report. J Prosthodont 2006; 15: 113-116.
-
Bilgin MS, Baytaroğlu EN, Erdem A, Dilber E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. Eur J Dent. 2016;10(2):286–91.262: 1305-7456.
-
Chen, H., Li, H., Zhao, Y., Zhang, X., Wang, Y., & Lyu, P. Adaptation of removable partial denture frameworks fabricated by selective laser melting. J Prosthet Dent 2019; 122(3): 316-324.
-
Çetinkaya E. Laser Cusing, Hızlı Protipleme ve Konvansiyonel Döküm Teknikleri ile Oluşturulan Metal Alt Yapıların Marjinal Uyumlarının İn Vitro İncelenmesi. Doktora Tezi, Marmara Üniversitesi, İstanbul, 2013. (Danışman: Prof. Dr. Atilla Sertgöz)
-
Davenport JC, Basker RM, Hralth JR, Ralph JP, Glantz PO. A system of design. Br Dent J. 2000; 189: 586-590.
-
Goguta, L., Lungeanu, D., Negru, R., Birdeanu, M., Jivanescu, A., & Sinescu, C. Selective Laser Sintering versus Selective Laser Melting and Computer Aided Design - Computer Aided Manufacturing in Double Crowns Retention. J Prosthodont Res. 2021; 65(3): 371-378.
-
Haj-Ali R, Al Quran F, Adel O. Dental laboratory communication regarding removable dental prothesis design in the UAE. J Prosthont. 2012; 21: 425-428.
-
Ishida, Y., Miura, D., & Shinya, A.. Application of fused deposition modeling technology for fabrication jigs of three-point bending test for dental composite resins. Materials . 2020 10; 13(16): 3524.
-
Islam E. Harb, Elsayed A. Abdel-Khalek, Salah A. Hegazy. CAD/CAM Constructed Poly(etheretherketone) Framework of Kennedy Class I Removable Partial Denture: A Clinical Report. J Prosthodontics 2018; 595-598.
-
Jacob Jo L. Spark erosion process: An overview. J Dent Imp 2011; 1: 2-6.
-
Jevremović, D., Puskar, T., Kosec, B., Vukelić, Đ., Budak, I., Aleksandrović, S., Egbeer, D., & Williams, R.J. The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD). Metalurgija. 2012; 51(2): 171–174.
-
Joda T, Ferrari M, Gallucci GO, Wittneben JG, Brägger U. Digital technology in fixed implant prosthodontics. Periodontol 2000. 2017; 73(1): 178-192.
-
Jorge JH, Quishida CC, Vergani CE, Machado AL, Pavarina AC, Giampaolo ET. Clinical evaluation of failures in removable partial dentures. J Oral Sci. 2012; 54: 337-342.
-
Kesmezacar BA, Gaucher H. Are the methods of fabricating partial dentures changing from stone age to the digital age ? Turkiye Klinikleri J Prosthodont-Special Topics 2015; 1: 53-59.
-
Liu, Y., Fang, M., Zhao, R., Liu, H., Li, K., Tian, M., Niu, L., Xie, R., & Bai, S. Clinical Applications of Polyetheretherketone in Removable Dental Prostheses: Accuracy, Characteristics, and Performance. Polymers. 2022;14(21), 4615.
-
Khorasani, E., Mokhlesi, A., Arzani, S., Ghodsi, S., & Mosaddad, S. A. Are There Clinical Differences Between 3D-Printed and Milled Complete Dentures? A Systematic Review and Meta-analysis. Int Dent J. 2025; 75(2), 464–473.
-
Konieczny B., Szczesio-Wlodarczyk A., Sokolowski J., & Bociong K. Challenges of Co-Cr Alloy Additive Manufacturing Methods in Dentistry-The Current State of Knowledge. Materials. 2021 22; 14(6): 1550.
-
Liu Q, Leu MC, Schmitt SM. Rapid prototyping in dentistry: Technology and application. Int J Adv Manuf Technol. 2006; 29(3–4): 317–35.
-
Neumeier TT, Neumeier H. Digital immeduate dentures treatment : a clinical report of two patients. J Prosthet Dent. 2016; 116: 314-319.
-
Nishiyama H., Taniguchi A., Tanaka S., Baba K. Novel fully digital workflow for removable partial denture fabrication. J Prosthodont Res. 2020;64:98–103.
-
Oh K.C., Jeon J., Kim J.H. Fabrication of a removable partial denture combining conventional and digital techniques. J Prosthet Dent. 2021;125:588–591.
-
Piao, X. Y., Jeon, J., Shim, J. S., & Park, J. M. (2022). A Digital Workflow for the Fabrication of a Milled Removable Partial Denture. Int J Environ Res. Public Health. 2022;19(14), 8540.
-
Pooya Soltanzadeh, Montry S. Suprono, Mathew T. Kattadiyil, Charles Goodacre, Wendy Gregorius. An In Vitro Investigation of Accuracy and Fit of Conventional and CAD/CAM Removable Partail Denture Framework. J Prosthodontics. 2019; 547-555.
-
Presotto, A. G. C., Oliveira, L. V., Pisani, M. X., Barão, V. A. R., & Mesquita, M. F. Influence of spark erosion on the fit of screw-retained Co-Cr fixed complete denture frameworks veneered with different materials. J Prosthet Dent. 2018; 119(5): 797-803.
-
Radhi A, Lynch CD, Hannigan A. Quality of writen communication and master impressions for fabrication of removable partial prothesis in the Kingdom oh Bahrain. J Oral Rehabil. 2007; 34: 153-157.
-
Sofu MM, Delikanlı K. Hızlı direkt imalat yöntemleri ve uygulamaları. TİMAK-Tasarım İmalat Analiz Kongresi. 2006: 194-200.
-
Srinivasan M, Gjengedal H, Cattani-Lorente M, et al. CAD/CAM milled complete removable dental prostheses: An in vitro evaluation of biocompatibility, mechanical properties, and surface roughness. Dent Mater J. 2018; 37(4): 526-533.
-
Strub JR, Rekow ED, Witkowski S. Computer-aided design and fabrication of dental restorations. J Am Dent Assoc. 2006; 137(9):1289–96.
-
Torii M, Nakata T, Takahashi K et al. Fitness and retentive force of cobaltchromium alloy clasps fabricated with repeated laser sintering and milling. J Prosthodont Res. 2018; 62(3): 342–6.
-
Tregerman, I., Renne, W., Kelly, A., & Wilson, D.Evaluation of removable partial denture frameworks fabricated using 3 different techniques. J Prosthet Dent. 2019; 390-395.
-
Türker, H., Aksoy, B., Özsoy, K. Fabrication of Customized dental guide by stereolithography method and evaluation of dimensional accuracy with artificial neural networks. J Mech Behav Biomed Materials. 2022,11(126): 105071.
-
Valenti, C., Isabella Federici, M., Masciotti, F., Marinucci, L., Xhimitiku, I., Cianetti, S., & Pagano, S. (2024). Mechanical properties of 3D printed prosthetic materials compared with milled and conventional processing: A systematic review and meta-analysis of in vitro studies. J Prosthet Dent. 2024; 132(2), 381–391.
-
Van Noort R. The future of dental devices is digital. Dent Mater. 2012; 28(1):3–12.
-
Virard F, Venet L, Richert R, Pfeffer D, Viguié G, Bienfait A, Farges JC, Ducret M. Manufacturing of an immediate removable partial denture with and intraoral scanner and CAD-CAM technology: a case report. BMC Oral Health. 2018;18: 120.
-
Wang C., Shi Y.F., Xie P.J., Wu J.H. Accuracy of digital complete dentures: A systematic review of in vitro studies. J Prosthet Dent. 2021;125:249–256.
-
Williams RJ, Bibb R ED. CAD/CAM fabricated removable partial-denture alloy frameworks. Pr Proced Aesthet Dent. 2008; 20: 349–51.
-
Xin XZ, Chen J, Xiang N, Gong Y, Wei B. Surface characteristics and corrosion properties of selective laser melted Co-Cr dental alloy after porcelain firing. Dent Mater. 2014; 30(3): 263–70.
-
Ye, H., Li, X., Wang, G., Kang, J., Liu, Y., Sun, Y., & Zhou, Y. A novel CAD/CAM Method for One-Piece Removable Partial Denture and Evaluation of Fit. Int J Prosthodont 2018; 31: 149-151.
-
Ye, H., Li, X., Wang, G., Kang, J., Liu, Y., Sun, Y., & Zhou, Y.Preliminary Clinical Application of Removable Partial Denture Frameworks Fabricated Using CAD-CAM Rapid Prototyping Techniques. Int J Prosthodont 2017; 30: 348-353.
-
Yıldırım M, Bayındır F. Protetik Diş Tedavisinde Hızlı Prototip Üretim Teknolojileri. Atatürk Üniversitesi Diş Hekim Fakültesi Derg. 2013; 23(3):430–5.
-
Yoo, S. Y., Kim, S. K., Heo, S. J., Koak, J. Y., & Kim, J. G. Dimensional Accuracy of Dental Models for Three-Unit Prostheses Fabricated by Various 3D Printing Technologies J Prosthodont Res. 2021; 65(3): 371-378.
-
Yoon, J. M., Liu, Y., Sun, Y., Ye, H., & Zhou, Y. (2024). Clinical evaluation of a one-piece polyetheretherketone removable partial denture fabricated using a novel digital workflow: A self-controlled clinical trial. J. prosthodont.2024; 33(8), 757–763.
-
Zhao M, Zhang J, Wang W, Zhang Q. High Effective Preparation of Amorphous-Like Si Nanoparticles Using Spark Erosion Followed by Bead Milling. Nanomaterials. 2021;11(3): 594.
Dijital Metodlar ile Hareketli Bölümlü Protez Yapımı
Year 2025,
Volume: 9 Issue: 2, 134 - 141, 29.08.2025
Sinem İşler
,
Şebnem Begüm Türker
Abstract
Geleneksel hareketli bölümlü protezler üzerinde yapılan çalışmalar sonucunda, dizayn ve üretim aşamalarında kusurlar olduğu belirtilmiştir. Bu kusur ve eksiklikler göz önünde bulundurularak, geleneksel hareketli bölümlü protezlerin günümüz teknolojisinin imkanları ile birleştirilerek üretilmesi amaçlanmıştır. Son zamanlarda teknolojinin gelişmesiyle beraber, dijital tekniklerle üretilen hareketli bölümlü protezler prostodontik alanda devrim yaratmıştır. Hareketli bölümlü protez üretimi için eklemeli veya eksiltmeli yöntem olan birçok dijital teknikten yararlanılabilmektedir. Güncellenmiş üretim teknikleriyle beraber kullanılan materyallerinde yelpazesi genişlemektedir. Bu makalenin amacı, güncel dijital yöntemler kullanılarak üretilen hareketli bölümlü protezlerin klinik uygulamalarda umut verici sonuçlar ortaya koyduğunu göstermektir.
References
-
Açıkalın A, Budak E, Uçar Y. Geleneksel Döküm ve Kopya Milleme Yöntemleri ile Hazırlanan Metal Altyapıların İç Uyumlarının Karşılaştırılması. Gazi Üniversitesi Dişhekimliği Fakültesi Derg. 2011; 28(3):169–76.
-
Al-Haj Husain N., Ozcan M., Schimmel M., Abou-Ayash S. A digital cast-free clinical workflow for oral rehabilitation with removable partial dentures: A dental technique. J Prosthet Dent. 2020;123:680–685.
-
Ali, Z., Baker, S., Sereno, N., & Martin, N. A Pilot Randomized Controlled Crossover Trial Comparing Early OHRQoL Outcomes of Cobalt-Chromium Versus PEEK Removable Partial Denture Frameworks. Int J Prosthodont. 2020; 33(4): 386-392.
-
Almufleh, B., Arellanob, A., & Tamimi, F. Patient-reported outcomes and framework fit accuracy of removable partial dentures fabricated using digital techniques: A systematic review and meta-analysis. J. prosthodont.2024; 33(7), 626–636.
-
Apak S. Farklı Hızlı Prototipleme Cihazlarında Üretilen Parçaların Üretim Zamanı ve Maliyet Açısından Karşılaştırılması. Yüksek Lisans Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara; 2010. ss 1-42. ( Danışman: Prof. Dr. Kürşad Dündar)
-
Aretxabaleta, M., Unkovskiy, A., Koos, B., Spintzyk, S., & Xepapadeas, A. B.Comparison of additive and subtractive CAD/CAM materials for their potential use as Tübingen Palatal Plate: An in-vitro study on flexural strength. Additive Manufacturing. 2021, 8 (37): 101693.
-
Arnold, C., Hey, J., Schweyen, R., & Setz, J. M.. Accuracy of CAD-CAM-fabricated removable partial dentures. J Prosthet Dent. 2018; 119(4): 586-592.
-
Azeez G., Çekiç Nagaş I. Protetik Diş Hekimliğinde Kullanılan Metal Üretim Tekniklerinde Güncel Gelişmeler. EÜ Dişhek Fak Derg 2017; 38: 128–139.
-
Berger JC, Driscoll CF. Rehabilitation of a spark erosion prosthesis: a clinical report. J Prosthodont 2006; 15: 113-116.
-
Bilgin MS, Baytaroğlu EN, Erdem A, Dilber E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. Eur J Dent. 2016;10(2):286–91.262: 1305-7456.
-
Chen, H., Li, H., Zhao, Y., Zhang, X., Wang, Y., & Lyu, P. Adaptation of removable partial denture frameworks fabricated by selective laser melting. J Prosthet Dent 2019; 122(3): 316-324.
-
Çetinkaya E. Laser Cusing, Hızlı Protipleme ve Konvansiyonel Döküm Teknikleri ile Oluşturulan Metal Alt Yapıların Marjinal Uyumlarının İn Vitro İncelenmesi. Doktora Tezi, Marmara Üniversitesi, İstanbul, 2013. (Danışman: Prof. Dr. Atilla Sertgöz)
-
Davenport JC, Basker RM, Hralth JR, Ralph JP, Glantz PO. A system of design. Br Dent J. 2000; 189: 586-590.
-
Goguta, L., Lungeanu, D., Negru, R., Birdeanu, M., Jivanescu, A., & Sinescu, C. Selective Laser Sintering versus Selective Laser Melting and Computer Aided Design - Computer Aided Manufacturing in Double Crowns Retention. J Prosthodont Res. 2021; 65(3): 371-378.
-
Haj-Ali R, Al Quran F, Adel O. Dental laboratory communication regarding removable dental prothesis design in the UAE. J Prosthont. 2012; 21: 425-428.
-
Ishida, Y., Miura, D., & Shinya, A.. Application of fused deposition modeling technology for fabrication jigs of three-point bending test for dental composite resins. Materials . 2020 10; 13(16): 3524.
-
Islam E. Harb, Elsayed A. Abdel-Khalek, Salah A. Hegazy. CAD/CAM Constructed Poly(etheretherketone) Framework of Kennedy Class I Removable Partial Denture: A Clinical Report. J Prosthodontics 2018; 595-598.
-
Jacob Jo L. Spark erosion process: An overview. J Dent Imp 2011; 1: 2-6.
-
Jevremović, D., Puskar, T., Kosec, B., Vukelić, Đ., Budak, I., Aleksandrović, S., Egbeer, D., & Williams, R.J. The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD). Metalurgija. 2012; 51(2): 171–174.
-
Joda T, Ferrari M, Gallucci GO, Wittneben JG, Brägger U. Digital technology in fixed implant prosthodontics. Periodontol 2000. 2017; 73(1): 178-192.
-
Jorge JH, Quishida CC, Vergani CE, Machado AL, Pavarina AC, Giampaolo ET. Clinical evaluation of failures in removable partial dentures. J Oral Sci. 2012; 54: 337-342.
-
Kesmezacar BA, Gaucher H. Are the methods of fabricating partial dentures changing from stone age to the digital age ? Turkiye Klinikleri J Prosthodont-Special Topics 2015; 1: 53-59.
-
Liu, Y., Fang, M., Zhao, R., Liu, H., Li, K., Tian, M., Niu, L., Xie, R., & Bai, S. Clinical Applications of Polyetheretherketone in Removable Dental Prostheses: Accuracy, Characteristics, and Performance. Polymers. 2022;14(21), 4615.
-
Khorasani, E., Mokhlesi, A., Arzani, S., Ghodsi, S., & Mosaddad, S. A. Are There Clinical Differences Between 3D-Printed and Milled Complete Dentures? A Systematic Review and Meta-analysis. Int Dent J. 2025; 75(2), 464–473.
-
Konieczny B., Szczesio-Wlodarczyk A., Sokolowski J., & Bociong K. Challenges of Co-Cr Alloy Additive Manufacturing Methods in Dentistry-The Current State of Knowledge. Materials. 2021 22; 14(6): 1550.
-
Liu Q, Leu MC, Schmitt SM. Rapid prototyping in dentistry: Technology and application. Int J Adv Manuf Technol. 2006; 29(3–4): 317–35.
-
Neumeier TT, Neumeier H. Digital immeduate dentures treatment : a clinical report of two patients. J Prosthet Dent. 2016; 116: 314-319.
-
Nishiyama H., Taniguchi A., Tanaka S., Baba K. Novel fully digital workflow for removable partial denture fabrication. J Prosthodont Res. 2020;64:98–103.
-
Oh K.C., Jeon J., Kim J.H. Fabrication of a removable partial denture combining conventional and digital techniques. J Prosthet Dent. 2021;125:588–591.
-
Piao, X. Y., Jeon, J., Shim, J. S., & Park, J. M. (2022). A Digital Workflow for the Fabrication of a Milled Removable Partial Denture. Int J Environ Res. Public Health. 2022;19(14), 8540.
-
Pooya Soltanzadeh, Montry S. Suprono, Mathew T. Kattadiyil, Charles Goodacre, Wendy Gregorius. An In Vitro Investigation of Accuracy and Fit of Conventional and CAD/CAM Removable Partail Denture Framework. J Prosthodontics. 2019; 547-555.
-
Presotto, A. G. C., Oliveira, L. V., Pisani, M. X., Barão, V. A. R., & Mesquita, M. F. Influence of spark erosion on the fit of screw-retained Co-Cr fixed complete denture frameworks veneered with different materials. J Prosthet Dent. 2018; 119(5): 797-803.
-
Radhi A, Lynch CD, Hannigan A. Quality of writen communication and master impressions for fabrication of removable partial prothesis in the Kingdom oh Bahrain. J Oral Rehabil. 2007; 34: 153-157.
-
Sofu MM, Delikanlı K. Hızlı direkt imalat yöntemleri ve uygulamaları. TİMAK-Tasarım İmalat Analiz Kongresi. 2006: 194-200.
-
Srinivasan M, Gjengedal H, Cattani-Lorente M, et al. CAD/CAM milled complete removable dental prostheses: An in vitro evaluation of biocompatibility, mechanical properties, and surface roughness. Dent Mater J. 2018; 37(4): 526-533.
-
Strub JR, Rekow ED, Witkowski S. Computer-aided design and fabrication of dental restorations. J Am Dent Assoc. 2006; 137(9):1289–96.
-
Torii M, Nakata T, Takahashi K et al. Fitness and retentive force of cobaltchromium alloy clasps fabricated with repeated laser sintering and milling. J Prosthodont Res. 2018; 62(3): 342–6.
-
Tregerman, I., Renne, W., Kelly, A., & Wilson, D.Evaluation of removable partial denture frameworks fabricated using 3 different techniques. J Prosthet Dent. 2019; 390-395.
-
Türker, H., Aksoy, B., Özsoy, K. Fabrication of Customized dental guide by stereolithography method and evaluation of dimensional accuracy with artificial neural networks. J Mech Behav Biomed Materials. 2022,11(126): 105071.
-
Valenti, C., Isabella Federici, M., Masciotti, F., Marinucci, L., Xhimitiku, I., Cianetti, S., & Pagano, S. (2024). Mechanical properties of 3D printed prosthetic materials compared with milled and conventional processing: A systematic review and meta-analysis of in vitro studies. J Prosthet Dent. 2024; 132(2), 381–391.
-
Van Noort R. The future of dental devices is digital. Dent Mater. 2012; 28(1):3–12.
-
Virard F, Venet L, Richert R, Pfeffer D, Viguié G, Bienfait A, Farges JC, Ducret M. Manufacturing of an immediate removable partial denture with and intraoral scanner and CAD-CAM technology: a case report. BMC Oral Health. 2018;18: 120.
-
Wang C., Shi Y.F., Xie P.J., Wu J.H. Accuracy of digital complete dentures: A systematic review of in vitro studies. J Prosthet Dent. 2021;125:249–256.
-
Williams RJ, Bibb R ED. CAD/CAM fabricated removable partial-denture alloy frameworks. Pr Proced Aesthet Dent. 2008; 20: 349–51.
-
Xin XZ, Chen J, Xiang N, Gong Y, Wei B. Surface characteristics and corrosion properties of selective laser melted Co-Cr dental alloy after porcelain firing. Dent Mater. 2014; 30(3): 263–70.
-
Ye, H., Li, X., Wang, G., Kang, J., Liu, Y., Sun, Y., & Zhou, Y. A novel CAD/CAM Method for One-Piece Removable Partial Denture and Evaluation of Fit. Int J Prosthodont 2018; 31: 149-151.
-
Ye, H., Li, X., Wang, G., Kang, J., Liu, Y., Sun, Y., & Zhou, Y.Preliminary Clinical Application of Removable Partial Denture Frameworks Fabricated Using CAD-CAM Rapid Prototyping Techniques. Int J Prosthodont 2017; 30: 348-353.
-
Yıldırım M, Bayındır F. Protetik Diş Tedavisinde Hızlı Prototip Üretim Teknolojileri. Atatürk Üniversitesi Diş Hekim Fakültesi Derg. 2013; 23(3):430–5.
-
Yoo, S. Y., Kim, S. K., Heo, S. J., Koak, J. Y., & Kim, J. G. Dimensional Accuracy of Dental Models for Three-Unit Prostheses Fabricated by Various 3D Printing Technologies J Prosthodont Res. 2021; 65(3): 371-378.
-
Yoon, J. M., Liu, Y., Sun, Y., Ye, H., & Zhou, Y. (2024). Clinical evaluation of a one-piece polyetheretherketone removable partial denture fabricated using a novel digital workflow: A self-controlled clinical trial. J. prosthodont.2024; 33(8), 757–763.
-
Zhao M, Zhang J, Wang W, Zhang Q. High Effective Preparation of Amorphous-Like Si Nanoparticles Using Spark Erosion Followed by Bead Milling. Nanomaterials. 2021;11(3): 594.