Treatment of dye-producing chemical industry wastewater by persulfate advanced oxidation

Yıl 2020, Cilt: 3 Sayı: 4, 149 - 156, 31.12.2020

Deniz İzlen Cifci Elçin Güneş Yalçın Güneş

https://doi.org/10.35208/ert.771190

Cited By: 1

Öz

A dye-producing chemical industry wastewater in Çorlu (Tekirdağ) is treated by the coagulation-flocculation process of the wastewater. However, the wastewater discharged after coagulation-flocculation still has a very high COD (4402 mg L^-1) with very high proportion of dissolved COD (4316 mg L^-1). Therefore, the aim of this study is to achieve higher COD and color removal in wastewater using Fe²⁺/S₂O₈ or UV/S₂O₈ oxidation process after coagulation-flocculation. The processes in the oxidation of this industrial wastewater using Fe²⁺/S₂O₈ and UV/S₂O₈ were examined and the effect of COD/Fe²⁺/S₂O₈ ratio (in Fe²⁺/S₂O₈) or COD/S₂O₈ ratio (in UV/S₂O₈), pH and oxidation time were evaluated in the study. While high organic matter and color removal was observed in acidic conditions for both processes, optimum pH were 3 and 6 in Fe²⁺/S₂O₈ and UV/S₂O₈ oxidation processes, respectively. In Fe²⁺/S₂O₈ oxidation, 61.1% of COD removal and above 97% of color (UV₄₃₆, UV₅₂₅ and UV₆₂₀) removal was obtained at 1/8/8 of COD/Fe²⁺/S₂O₈ ratio and pH 3 after 1 h oxidation. In UV/S₂O₈ oxidation (COD/S₂O₈ ratio 1/8, pH 6), 54.4% of COD and 98% of color (UV₄₃₆, UV₅₂₅ and UV₆₂₀) removals were achieved after 4 h oxidation. As a result, both Fe²⁺/S₂O₈ and UV/S₂O₈ oxidation processes were applied to ensure discharge standards for color removal from this chemical industry wastewater are effective methods as they provide over 97% color removal. Moreover, COD removal efficiency was approximately 55-60% in both methods. 

Anahtar Kelimeler

Activation, kinetics, oxidation, persulfate, industrial wastewater treatment

Kaynakça

• [1]. V. García, E. Pongrácz and R. Keiski, “Waste minimization in the chemical industry: From theory to practice”, Proceedings of the Waste Minimization and Resources Use Optimization Conference, pp. 93-106, 2004.
• [2]. M. Kornaros and G. Lyberatos, “Biological treatment of wastewaters from a dye manufacturing company using a trickling filter”, Journal of Hazardous Materials, Vol. 136, pp. 95-102, 2006.
• [3]. H.-Y. Shu and W.-P. Hsieh, “Treatment of dye manufacturing plant effluent using an annular UV/H2O2 reactor with multi-UV lamps”, Separation and Purification Technology, Vol. 51, pp. 379-386, 2006.
• [4]. F. Sun, B. Sun, J. Hu, Y. He and W. Wu, “Organics and nitrogen removal from textile auxiliaries wastewater with A2O-MBR in a pilot-scale”, Journal of Hazardous Materials, Vol. 286, pp. 416-424, 2015.
• [5]. E. Kattel, N. Dulova, M. Viisimaa, T. Tenno and M. Trapido, “Treatment of high-strength wastewater by Fe2+-activated persulphate and hydrogen peroxide”, Environmental Technology, Vol. 37 (3), pp. 352-359, 2016.
• [6]. I.A. Ike, K.G. Linden, J.D. and M. Orbell Duke, “Critical review of the science and sustainability of persulphate advanced oxidation processes”, Chemical Engineering Journal, Vol. 338, pp. 651-669, 2018.
• [7]. P. Devi, U. Das and A.K. Dalai, “In-situ chemical oxidation: Principle and applications of peroxide and persulfate treatments in wastewater systems”, Science of the Total Environment, Vol. 571, pp. 643-657, 2016.
• [8]. R. Guo, Q. Meng, H. Zhang, X. Zhang, B. Li, Q. Cheng and X. Cheng, “Construction of Fe2O3/Co3O4/exfoliated graphite composite and its high efficient treatment of landfill leachate by activation of potassium persulfate”, Chemical Engineering Journal, Vol. 355, pp. 952-962, 2019.
• [9]. L.W. Matzek and K.E. Carter, “Activated persulfate for organic chemical degradation: A review”, Chemosphere, Vol. 151, pp. 178-188, 2016.
• [10]. S. Wacławek, H.V. Lutze, K. Grübel, V.V.T. Padil, M. Černík and D.D. Dionysiou, “Chemistry of persulfates in water and wastewater treatment: A review”, Chemical Engineering Journal, Vol. 330, pp. 44-62, 2017.
• [11]. S.Y. Guvenc, “Optimization of COD removal from leachate nanofiltrationconcentrate using H2O2/Fe+2/heat - Activated persulfate oxidation processes”, Process Safety and Environmental Protection, Vol. 126, pp. 7-17, 2019.
• [12]. T.T. Asha, R. Gandhimathi, S.T. Ramesh and P.V. Nidheesh, “Treatment of stabi-lized leachate by ferrous-activated persulfate oxidative system”, Journal of Hazardous, Toxic, and Radioactive Waste, Vol. 21 (2), pp. 1-6, 2017.
• [13]. E. Kattel and N. Dulova, “Ferrous ion-activated persulphate process for landfill leachate treatment: removal of organic load, phenolic micropollutants and nitrogen”, Environmental Technology, Vol. 38 (10), pp. 1223-1231, 2017.
• [14]. Z. Liu, X. Li, Z. Rao and F. Hu, “Treatment of landfill leachate biochemical effluent using the nano-Fe3O4/Na2S2O8 system: Oxidation performance, wastewater spectral analysis, and activator characterization”, Journal of Environmental Management, Vol. 208, pp. 159-168, 2018.
• [15]. A.R. Ishak, F.S. Hamid, S. Mohamad and K.S. Tay, “Stabilized landfill leachate treatment by coagulation-flocculation coupled with UV-based sulfate radical oxidation process”, Waste Management, Vol. 76, pp. 575-581, 2018.
• [16]. C. Chen, H. Feng and Y. Deng, “Re-evaluation of sulfate radical based advanced oxidation processes (SR-AOPs) for treatment of raw municipal landfill leachate”, Water Research, Vol. 153, pp. 100-107, 2019.
• [17]. E. Güneş, E. Demir, Y. Güneş and A. Hanedar, “Characterization and treatment alternatives of industrial container and drum cleaning wastewater: Comparison of Fenton-like process and combined coagulation/oxidation processes”, Separation and Purification Technology, Vol. 209, pp. 426-433, 2019.
• [18]. I. Arslan-Alaton and I. Akmehmet Balcioglu, “Biodegradability assessment of ozonated raw and biotreated pharmaceutical wastewater”, Archives of Environmental Contamination and Toxicology, Vol. 43 (4), pp. 425-431, 2002.
• [19]. Standard Methods for the Examination of Water and Wastewater 21th edn, American Public Health Association/American Water Works Association/Water Environment Federation, Washington DC, USA, 2005.
• [20]. C. Liang, C.-F. Huang, N. Mohanty and R.M. Kurakalva, “A rapid spectrophotometric determination of persulfate anion in ISCO”, Chemosphere, Vol. 73, pp. 1540-1543, 2008.
• [21]. A.A. Babaei and F. Ghanbari, “COD removal from petrochemical wastewater by UV/hydrogen peroxide, UV/persulfate and UV/percarbonate: biodegradability improvement and cost evaluation”, Journal of Water Reuse and Desalination, Vol. 6 (4), pp. 484-494, 2016.
• [22]. H. Zhang, Z. Wang, C. Liu, Y. Guo, N. Shan, C. Meng and L. Sun, “Removal of COD from landfill leachate by an electro/Fe2+/peroxydisulfate process”, Chemical Engineering Journal, Vol. 250, pp. 76-82, 2014.
• [23]. S. Zhu, Z. Zhou, H. Jiang, J. Ye, J. Ren, L. Gu and L. Wang, “Advanced treatment of effluents from an industrial park wastewater treatment plant by ferrous ion activated persulfate oxidation process”, Water Science & Technology, Vol. 74 (2), pp. 535-541, 2016.
• [24]. C.S. Uyguner and M. Bekbolet, “Evaluation of humic acid photocatalytic degradation by UV-vis and fluorescence spectroscopy”, Catalysis Today, Vol. 101 (3-4), pp. 267-274, 2005.
• [25]. D. Kulikowska, T. Jóźwiak, M. Kuczajowska-Zadrożna, T. Pokój and Z. Gusiatin, “Efficiency of nitrification and organics removal from municipal landfill leachate in the rotating biological contactor (RBC)”, Desalination and Water Treatment, Vol. 33 (1- 3), pp. 125-131, 2011.
• [26]. G. Barzegar, S. Jorfi, V. Zarezade, M. Khatebasreh, F. Mehdipour and F. Ghanbari, 4 “Chlorophenol degradation using ultrasound/peroxymonosulfate/nanoscale zero valent iron: Reusability, identification of degradation intermediates and potential application for real wastewater”, Chemosphere, Vol. 201, pp. 370-379, 2018.
• [27]. F. Ghanbari, M. Moradi and M. Manshouri, “Textile wastewater decolorization by zero valent iron activated peroxymonosulfate: Compared with zero valent copper”, Journal of Environmental Chemical Engineering, Vol. 2 (3), pp. 1846-1851, 2014.
• [28]. J.M. Monteagudo, A. Duran, R. Gonzalez and A.J. Exposito, “In situ chemical oxidation of carbamazepine solutions using persulfate simultaneously activated by heat energy, UV light, Fe2+ ions, and H2O2”, Applied Catalysis B: Environmental, Vol. 176-177, pp. 120-129, 2015.
• [29]. M. Hassan, X. Wang, F. Wang, D. Wu, A. Hussain and B. Xie, “Coupling ARB-based biological and photochemical (UV/TiO2 and UV/S2O8) techniques to deal with sanitary landfill leachate”, Waste Management, Vol. 63, pp. 292-298, 2017.
• [30]. J.L. Acero, F.J. Benítez, F.J. Real and E. Rodríguez, “Degradation of selected emerging contaminants by UV-activated persulfate: Kinetics and influence of matrix constituents”, Seperation and Purification Technology, Vol. 201, pp. 41-50, 2018.
• [31]. S. Dhaka, R. Kumar, M.A. Khan, K.-J. Paeng, M.B. Kurade, S.-J. Kim and B.-H. Jeon, “Aqueous phase degradation of methyl paraben using UV-activated persulfate method”, Chemical Engineering Journal, Vol. 321, pp. 11-19, 2017.
• [32]. N. Jaafarzadeh, M. Omidinasab and F. Ghanbari, “Combined electro-coagulation and UV-based sulfate radical oxidation processes for treatment of pulp and paper wastewater”, Process Safety and Environmental Protection, Vol. 102, pp. 462-472, 2016.
• [33]. C. Liang, Z.-S. Wang and C.J. Bruell, “Influence of pH on persulfate oxidation of TCE at ambient temperatures”, Chemosphere, Vol. 66, pp. 106-113, 2007.
• [34]. Z. Wang, Y. Shao, N. Gao and N. An, “Degradation kinetic of dibutyl phthalate (DBP) by sulfate radical- and hydroxyl radical-based advanced oxidation process in UV/persulfate system”, Separation and Purification Technology, Vol. 195, pp. 92-100, 2018.