IMPROVEMENT OF VOLTAGE STRESS ON MOTOR CONTROL HARDWARE VIA OPTIMAL LOCATION OF RC SNUBBER CIRCUIT
Abstract
While the increase in the customer failure rate in the consumer electronics sector affects the manufacturers negatively in terms of cost. It has also become one of the issues that cause customer loss and customer satisfaction. In addition to the economic losses, during the production and distribution of the spare parts and products that are changed at the customer's home due to the reliability problems experienced in the field, extra carbon emissions are released to the nature for this operation. For these reasons, it has become important to reduce the rate of customer failure.
With the increase in electronic components, the quality and reliability precautions that may occur in the electronic circuits, have become the subject of study today. As in many white goods products, it is advantageous to have variable speed motors in refrigerators due to energy efficiency and energy regulation issues. For this reason, the compressor of refrigerator comes to the forefront as the component that dissipates the highest power proportionally. With the use of variable speed compressors, the need for an electronic board with including power conversion and motor driving capability has arisen.
In this paper, RC Snubber circuits have been studied in order to prevent quality problems that may occur due to high switching frequency in flyback converter topology, which is one of the DC-DC converters that provide isolation. The methods in the literature based on the location of the RC Snubber in the circuit and the determination of its related values were examined and experiments were made on the simulation program. At the same time, a test mechanism was set up on the variable speed compressor motor control card of the refrigerator and measurements were taken with the help of an oscilloscope. The measurements taken in the simulation program and the experimental environment were compared.
Keywords
Refrigerator, Compressor, FlybackConverter, Snubber, Powerquality
References
- [1] Yesilaydin I and Erbay LB. Numerical ınvestigation of flow losses through discharge line of household type refrigerator compressors. IOP Conf. Series: Materials Science and Engineering, 2015;90, pp. 1-10.
- [2] Nepal R Musibau HO, Jamasb T. Energy consumption as an indicator of energy efficiency and emissions in the European Union: A GMM based quantile regression approach. Energy Policy, 2021;158, pp. 1-10.
- [3] Mandel T, Brugger H, Guetlein MC, Schleich J. Integrating discrete choice experiments and bottom-up energy demand models to ınvestigate the long-term adoption of electrical appliances in response to energy efficiency policies. BEHAVE 2020-2021 the 6th European Conference on Behaviour Change for Energy Efficiency, 2021; Denmark, 209-212.
- [4] Laitala K, Klepp IG, Haugrønning V, Throne-Holst H, Strandbakken P. Increasing repair of household appliances, mobile phones and clothing: Experiences from consumers and the repair industry. Journal of Cleaner Production, 2021; 282, 1-13.
- [5] Kanargı ÖB. Evaluation of the performance of a household refrigerator using a variable speed compressor with 1d simulations. Unpublished Master's Thesis. İzmir: İzmir Institute of Technology, Mechanical Engineering, 2013.
- [6] Yıldız L. Kompresör kabuğunun sayısal ve deneysel analizi. Unpublished Master's Thesis. İstanbul: İstanbul Technical University, Institute of Science, 2016.
- [7] Patel HK. Voltage transient spikes suppression in flyback converter using dissipative voltage snubbers. 3rd IEEE Conference on Industrial Electronics and Applications, 2008; pp. 897-901.
- [8] Mohammadi M and Ordonez M. Flyback lossless passive snubber. 2015 IEEE Energy Conversion Congress and Exposition (ECCE), 2015; pp. 5896-5901.
- [9] ROHM Semiconductor (2016). Snubber Circuit for Buck Converter IC. Application Note.
- [10] Ridley R. Flyback Converter Snubber Design. Switching Power Magazine, 2005.