DEVELOPMENT AND CHARACTERIZATION OF KAOLIN-INFUSED PAPER
Abstract
There is a need to improve the mechanical, optical and physical properties, as well as identify alternative sources of raw materials for paper in order to decrease deforestation, costs of manufacturing paper, and eventually lower the costs of paper. This study therefore explores the development and characterization of kaolin-infused paper using recycled paper pulp and kaolin as basic raw materials. Kaolin, a locally abundant clay mineral, was incorporated at varying levels to evaluate its influence on the mechanical, optical, and physical properties of paper. Paper sheets were produced with recycled pulp and different variations of kaolin and tested for tensile strength, grammage, water absorption, and microstructural characteristics using SEM, EDS, and XRD. The results show that moderate kaolin addition (3–6 wt%) improved tensile strength from 5.69 to 6.65 MPa before reducing as percentage of kaolin increased , stiffness also improved , and water absorption reduced from 286.6 to 196.65 g/m2. Excessive filler levels caused agglomeration and reduced mechanical integrity. XRD confirmed crystalline phases such as quartz and feldspar, indicating the mineral contribution of kaolin to the composite matrix. The findings demonstrate kaolin’s potential as a sustainable filler for improved paper properties when used at optimal levels. Combined with recycled pulp, this approach supports eco-friendly, cost-effective, and sustainable paper production.
Keywords
References
- [1] Ezeudu O, Agunwamba J, Ezeasor I, Madu C. Sustainable Production and Consumption of Paper and Paper Products in Nigeria; A Review. Resources 2019; 8(1): 53-75.
- [2] Sesan A, Bolarinwa O, Temitope O. Impact of Kaolin on Physicomechanical Properties of Density-graded Cement Bonded Paperboards. BioResources 2020; 15 (3): 6033-6044.
- [3] Tofani G, De Nys J, Cornet I, Tavernier S. Alternative filler recovery from paper waste stream. Waste and Biomass Valorization 2020;1-12.
- [4] Naijian F, Rudi H, Resalati H, Torshizi HJ. Application of bio-based modified kaolin clay engineered as papermaking additive for improving the properties of filled recycled papers. Applied Clay Science 2019; 182.
- [5] Aroke U, El-Nafatay U, Osha, O. Properties and Characterization of Kaolin Clay from Alkaleri, North-Eastern Nigeria, International Journal of Emerging Technology and Advance Engineering 2013; 3 (11): 387-392.
- [6] Jikan S, Badarulzaman N, Yahaya S, Adamu A. Delamination of Kaolinite by Intercalation of Urea Using Milling. Materials Science Forum 2017; 888, 136–140.
- [7] Gronfos J. Use of Fillers in Paper and Paperboards Grades. Materials Science, Engineering 2010.
- [8] Lee H, Young Ju L, Hyoung JK. Feasibility study of the paper sludge properties in manufacturing recycled filler. BioResources 2024; 19 (3): 6355-6367.
- [9] El-Gendy A, El-Sakhawy M, Adel A., Al-Shemy M. Effect of Microcrystalline Cellulose as a Filler and/or Filler Retention Aid on the Mechanical Properties of Bagasse Paper Sheets. Cellulose Chem. Technology 2020; 54 (9-10): 993-1000.
- [10] Hao S, Xiyu C, Lingjun W, Jieyu C, Wanlu Z, Longfei L. Production of recycled paper using harmless municipal sludge as a new biomass filler. Nordic Pulp & Paper Research Journal 2024; 39(2): 177-188.