INVESTIGATION OF 3D CULTURE OF HUMAN ADIPOSE TISSUE-DERIVED MESENCHYMAL STEM CELLS IN A MICROFLUIDIC PLATFORM
Abstract
Mesenchymal stem cells (MSCs) are multipotent stem cells that can support various tissues including bone marrow, adipose tissue, and synovial fluids, from which they can be readily isolated. The objective of this study is to harness the advantages of microfluidic systems for controlling and enhancing the maintenance and viability, and regenerative properties of MSCs by providing a 3D culture microenvironment with gelatin methacrylate (GelMA) hydrogel and exposing the cells to a slow fluid flow and low shear stress conditions. GelMA has methacryloyl groups and can be crosslinked by a photocuring process using biocompatible photoinitiators. The most common used photoinitiator for cellular encapsulation within hydrogels is the ultraviolet (UV) initiator 2-hydroxy-4′-(2-hydroxyethoxy)-2-methylpropiophenone (Irgacure 2959 or I2959), but due to its low water solubility and the necessity of using a shorter wavelength light (365 nm), it can lead to cellular phototoxic and genotoxic effects. To overcome these limitations, lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) have recently been used with GelMA as an alternative photoinitiator. Because LAP is highly water soluble and has a 10 times faster polymerization rate, and it requires a visible light (λ = 405 nm) which makes it much safer for the cells, we use 10% GelMA together with 0.05% LAP photoinitiator for bioprinting human adipose tissue derived MSCs (hAT-MSCs) onto a membrane that has a 40 µm mesh size. To demonstrate a microfluidic culture advancement for improving the biological activities and regenerative capacity of the cells including cell adhesion, growth, viability and proliferation capacity as ultimate goals of this study, the membrane carrying the bioprinted construct was placed in a PDMS microchannel and exposed to the fluid to obtain dynamic microenvironments found in the human body. As a result, the cells were successfully maintained in the microfluidic 3D cell culture for two days, with a high cell viability of 99%.
Keywords
MSCs, GelMA, 3D cell culture, cell adhesion, Organ on a chip
Supporting Institution
TÜBİTAK
Project Number
20AG003 and 20AG031
Thanks
This study was supported by Turkish Scientific and Technological Council (TÜBİTAK 1004-Regenerative and Restorative Medicine Research and Applications) under the grant numbers of 20AG003 and 20AG031.
References
- [1] Ingber DE. Developmentally Inspired Human ‘Organs on Chips’. Development, 2018; 145(16):dev156125.
- [2] Bhatia SN, Ingber DE. Microfluidic Organs-on-Chips. Nat Biotechnol, 2014; 32(8):760-72.
- [3] Avci H, Güzel FD, Erol S, Akpek A. Recent Advances in Organ-on-A-Chip Technologies and future Challenges: A Review. Turkish Journal of Chemistry, 2017; 42(3):587-610.
- [4] Zhang YS, Aleman J, Shin SR. et al. Multisensor-Integrated Organs-on-Chips Platform for Automated and Continual in Situ Monitoring of Organoid Behaviors. Proceedings of the National Academy of Sciences, 2017; 114(12):E2293-E2302.
- [5] Shin SR, Zhang YS, Kim D-J. et al. Aptamer-Based Microfluidic Electrochemical Biosensor for monitoring Cell-Secreted Trace Cardiac Biomarkers. Analytical Chemistry, 2016; 88(20):10019-10027.
- [6] Shin SR, Kilic T, Zhang YS. et al. Label‐Free and Regenerative Electrochemical Microfluidic Biosensors for Continual Monitoring of Cell Secretomes. Advanced Science, 2017; 4(5):1600522.
- [7] Mancio-Silva L, Fleming HE, Miller AB. et al. Improving Drug Discovery by Nucleic Acid Delivery in Engineered Human Microlivers. Cell Metabolism, 2019; 29(3):727-735. e3.
- [8] de Souza N. Organoids. Nature Methods, 2018; 15(1):23-23.
- [9] Garbioglu DB, Demir N, Ozel C, Avci H, Dincer M. Determination of Therapeutic Agents Efficiencies of Microsatellite Instability High Colon Cancer Cells in Post‐Metastatic Liver Biochip Modeling. The FASEB Journal, 2021; 35(9):e21834.
- [10] Uccelli A, Moretta L, Pistoia V. Mesenchymal Stem Cells in Health and Disease. Nature Reviews Immunology, 2008; 8(9):726-736.