Research Article
BibTex RIS Cite

OPTIMIZATION OF SELECTIVE CU2+ ADSORPTION WITHIN THE MULTI-ION SYSTEM BY USING ACTIVATED CARBON PREPARED BY ULTRASOUND

Year 2018, Volume: 19 Issue: 4, 893 - 906, 31.12.2018
https://doi.org/10.18038/aubtda.383584

Abstract

Optimization of selective adsorption of Cu2+ from multi-ion media containing Cu2+, Zn2+ and Ni2+ on activated carbons prepared from ultrasound-assisted 10 % KOH impregnated hazelnut shells was investigated. The effects of independent variables such as particle size, ultrasound power density, impregnation rate, impregnation time, activation temperature and activation time for the production of suitable activated carbons were investigated by experiments with partial factorial design and central composite design. At the end of the adsorption experiments, activated carbons were evaluated by their adsorption capacities. In addition, the results were statistically modelled and optimized using a constrained optimization program via Matlab computer software. Optimum preparation conditions were obtained as follows particle size 1.75 mm, ultrasound power/volume 2 W/L, impregnation ratio 0.0168 g/mL, impregnation time 132 min, activation temperature 661°C and activation time 71,5 min, following with maximum adsorption capacity was found as 82,9 mg Cu2+/g Ac. On the basis of the distribution coefficient (Kd), the selectivity sequence for the multi-ion system of the prepared activated carbons is generally Cu+2 > Zn+2 > Ni+2. As a result, ultrasound-assisted prepared activated carbons can be used effectively to selectively adsorb Cu+2 from multiple ion systems.

References

  • [1] Erguvenerler, F., Removal of Toxic Metal from Water Using Natural Waste Adsorbents. (Master Thesis), Celal Bayar University Institute of Science, Department of Chemistry, 2015. [2] Mutlu, S., Adsorption of Active Carbon and Lead Ions Produced from Hazelnut Shell and Grape Hulls. (Master Thesis), Istanbul Technical University Institute of Science, Department of Chemistry Engineering, Istanbul, 2009. [3] Gözübüyük, Ö., Lead, Copper and Nickel Removal by Adsorptive Method from Aqueous Solutions Using Oltu Stone. (Master Thesis), Ataturk University Institute of Science, Department of Chemistry Engineering, Erzurum, 2012. [4] İnci, A., Investigation of Some Heavy Metal Levels in Cow Milks Produced in Aydın City. (Master Thesis), Adnan Menderes University Institute of Health Sciences, Department of Biochemistry, Aydın, 2015. [5] Baylan, N., Investigation of Adsorption Properties of Bentonite and Grape Kernel Active Carbon in Single and Multiple Ion Systems. (Master Thesis), Istanbul Technical University Institute of Science, Department of Chemistry Engineering, Istanbul, 2013. [6] Ghorbel-Abid, I. and Trabelsi-Ayadi, M., Competitive Adsorption of Metals on Local Landfill Clay. Arabian Journal of Chemistry, 8, 25-31, 2015. [7] Alkan, E., Investigation of Adsorption Kinetic and Removal of Heavy Metal from Aqueous Solution Using a Baffler Cylinder. (Master Thesis), Yuzuncu Yıl University Institute of Science, Department of Chemistry, Van, 2008. [8] Parlak, M., Removal of Heavy Metals from Modified Killers. (Master Thesis), Yildiz Technical University Institute of Science, Analytical Chemistry, Istanbul, 2009. [9] Gönen, T., Adsorption of Copper and Nickel Ions from Solution of Clay Mineral. (Master Thesis), Kahramanmaras Sutcu Imam University Institute of Sciences, Dept. of Soil Science, Kahramanmaras, 2009. [10] Eloussaief, M., Hamza, W., Kallel, N. and Benzina M., Waste waters Decontamination: Mechanisms of Pb, Zn and Cd Competitive Adsorption on Tunisian Smectite in Single and Multi-Solute Systems. Environmental Progress and Sustainable Energy, 32(2), 229-238, 2013. [11] Coskun, S. and Soykan, C., Preparation of Amidoximated Polyester Fiber and Competitive Adsorption of Some Heavy Metal Ions from Aqueous Solution onto This Fiber. Journal of Applied Polymer Science, 112, 1798-1807, 2009. [12] Futalan, C., Kan, C., Dalida, M., Hsien, K., Pascua, C., Wan, M., Comparative and Competitive Adsorption of Copper, Lead and Nicel Using Chitosan İmmobilized on Bentonite. Carbohydrate Polymers, 83, 528-536, 2011. [13] Kavand, M., Kaghazchi, T. AndSoleimani, M., Optimization of Parameters for Competitive Adsorption of Heavy Metal Ions (Pb, Ni, Cd) onto Activated Carbon. Korean J. Chem. Eng., 31(4), 692-700, 2014. [14] Kampalanonwat, P. and Supaphol, P., The Study of Competitive Adsorption of Heavy Metal Ions from Aqueous Solution by Aminated Polyacrylonitrile Nanofiber Mats. Energy Procedia, 56, 142-151, 2014. [15] Yang, J., Wei, W., Pi, S., Ma, F., Li, A., Wu, D. and Xing, J., Competitive Adsorption of Heavy Metals by Extracellular Polymeric Substances Extracted from Klebsiella sp. J1. Bioresource Technology, 196, 533-539, 2015. [16] Sen, N., Obtaining and Characterization of Active Carbon from Hazelnut Shells. (Master Thesis), Firat University, Faculty of Science, Department of Chemical Engineering, Elazıg, 2009. [17] Makeswari, M. and Santhi, T., Optimization of Preparation of Activated Carbon from Ricinus communis Leaves by Microwave-Assisted Zinc Chloride Chemical Activation: Competitive Adsorption of Ni Ions from Aqueous Solution. Hindawi Publishing Corporation Journal of Chemistry, (314790), 1-12, 2013. [18] Akbulut, M., Activated Carbon Production and Characterization from Lignite and Biomass Mixture. (Master Thesis), Ankara University Institute of Science, Department of Chemistry Engineering, Ankara, 2015. [19] Ozturk, D., Investigation of lead adsorption on pumice samples collected from Agrı Mountains and Optimization of ambient conditions by Response surface methods. (Master Thesis), Yuzuncu Yıl University Institute of Science, Department of Chemistry, Van, 2013. [20] Dogan, D., Spectroscopic Analysis of Organic Compounds in Competitive Adsorbent Similar Structures and Adsorption Modeling in Chemistry. (Doctorate thesis), Inonu University Institute of Science, Department of Chemistry, Malatya, 2008. [21] Alp, T., Comparative Study of Growth Kinetics of Various Kinds of Yeast and Mold Mushrooms and Biocorrosion of Cells in Metal Wastewater Containing Heavy Metal Pollution. (Master Thesis), Cumhuriyet University, Institute of Science and Technology, Department of Chemical Engineering, 2007. [22] Sayan, E., Ultrasound-assisted preparation of activated carbon from alkaline impregnated hazelnut shell: An optimization study on removal of Cu2+ from aqueous solution, Chemical Engineering Journal, 115, 213–218, 2006. [23] Şayan, E., Atık Kırmızı Çamurdan Sülfirik Asit Liçingi ile TiO2 in Geri Kazanılmasının İstatistiksel Deney Tasarım Yöntemleri İle İncelenmesi, Atatürk Üniversitesi Fen Bilimleri Enstitüsü,Yüksek Lisans Tezi, Erzurum, 1998. [24] Sayan, E., Bayramoğlu, M., Statistical modeling of sulfuric acid leaching of TiO2, Fe2O3 and Al2O3 from red mud. I. Chem. E. Symp. Ser., Trans. IChemE 79 (B), 291–296, 2001. [25] Şayan, E., Kırmızı Çamurdan TiO2’in Sülfürik Asit İle Liçingi Üzerine Ultrases Gücünün Etkisinin İncelenmesi, İstatistiksel Modellenmesi Ve Optimizasyonu, Atatürk Üniversitesi Fen Bilimleri Enstitüsü, Doktora Tezi, Erzurum, 2002. [26] Myers, R.H., Response Surface Methodology. Allyn and Bacon, N. York. 126 pp, 1971. [27] McKay, G., Use of Adsorbents for the Removal of Pollutants from Wastewater, Tokyo, 1996. [28] İngec, A., Modeling and optimization of Ni2+ adsorption from aqueous solutions with activated carbons prepared by alkali impregnation with ultrasound. (Master Thesis), Ataturk University Institute of Science, Engineering Faculty Chemistry Eng. Dear Mist, Erzurum, 2013. [29] Sayan, E., An Optimization Study on Removal of Zn2+ from Aqueous Solution by Ultrasound-Assisted Preparation of Activated Carbon from Alkaline Impregnated Hazelnut Shell. J. Chem. Soc. Pak., 36, 28-36, 2014. [30] Bourliva A., Michailidis K., Filippidis A., Sikalidis C., Betsiou M., Bantsis G., Copper removal from single and multi-component systems by natural bentonite from milos island, Greece, 8th Panhellenic Scientific Conference on Chemical Engineering, Thessaloniki, Greece, 26-28/05/2011, Proceedings, 8p, 2011. [31] Buscano, S.I., Lourdes, M., Dalida, P., Kan, C., Selectivity sequence and mechanism of adsorption of Cu2+, Ni2+, Pb2+ and Zn2+ onto chitosan-montmorillionite composite beads. Conference: 5th Cross-Straits Drinking Water Symposium, At Macao, China, 2009. [32] Alloway, B.J., Soil processes and the behaviour of metals. In: Alloway, B.J. (Ed.), Heavy metals in Soils. Blackie Academic&Professional, London, pp.11-37, 1995.
Year 2018, Volume: 19 Issue: 4, 893 - 906, 31.12.2018
https://doi.org/10.18038/aubtda.383584

Abstract

References

  • [1] Erguvenerler, F., Removal of Toxic Metal from Water Using Natural Waste Adsorbents. (Master Thesis), Celal Bayar University Institute of Science, Department of Chemistry, 2015. [2] Mutlu, S., Adsorption of Active Carbon and Lead Ions Produced from Hazelnut Shell and Grape Hulls. (Master Thesis), Istanbul Technical University Institute of Science, Department of Chemistry Engineering, Istanbul, 2009. [3] Gözübüyük, Ö., Lead, Copper and Nickel Removal by Adsorptive Method from Aqueous Solutions Using Oltu Stone. (Master Thesis), Ataturk University Institute of Science, Department of Chemistry Engineering, Erzurum, 2012. [4] İnci, A., Investigation of Some Heavy Metal Levels in Cow Milks Produced in Aydın City. (Master Thesis), Adnan Menderes University Institute of Health Sciences, Department of Biochemistry, Aydın, 2015. [5] Baylan, N., Investigation of Adsorption Properties of Bentonite and Grape Kernel Active Carbon in Single and Multiple Ion Systems. (Master Thesis), Istanbul Technical University Institute of Science, Department of Chemistry Engineering, Istanbul, 2013. [6] Ghorbel-Abid, I. and Trabelsi-Ayadi, M., Competitive Adsorption of Metals on Local Landfill Clay. Arabian Journal of Chemistry, 8, 25-31, 2015. [7] Alkan, E., Investigation of Adsorption Kinetic and Removal of Heavy Metal from Aqueous Solution Using a Baffler Cylinder. (Master Thesis), Yuzuncu Yıl University Institute of Science, Department of Chemistry, Van, 2008. [8] Parlak, M., Removal of Heavy Metals from Modified Killers. (Master Thesis), Yildiz Technical University Institute of Science, Analytical Chemistry, Istanbul, 2009. [9] Gönen, T., Adsorption of Copper and Nickel Ions from Solution of Clay Mineral. (Master Thesis), Kahramanmaras Sutcu Imam University Institute of Sciences, Dept. of Soil Science, Kahramanmaras, 2009. [10] Eloussaief, M., Hamza, W., Kallel, N. and Benzina M., Waste waters Decontamination: Mechanisms of Pb, Zn and Cd Competitive Adsorption on Tunisian Smectite in Single and Multi-Solute Systems. Environmental Progress and Sustainable Energy, 32(2), 229-238, 2013. [11] Coskun, S. and Soykan, C., Preparation of Amidoximated Polyester Fiber and Competitive Adsorption of Some Heavy Metal Ions from Aqueous Solution onto This Fiber. Journal of Applied Polymer Science, 112, 1798-1807, 2009. [12] Futalan, C., Kan, C., Dalida, M., Hsien, K., Pascua, C., Wan, M., Comparative and Competitive Adsorption of Copper, Lead and Nicel Using Chitosan İmmobilized on Bentonite. Carbohydrate Polymers, 83, 528-536, 2011. [13] Kavand, M., Kaghazchi, T. AndSoleimani, M., Optimization of Parameters for Competitive Adsorption of Heavy Metal Ions (Pb, Ni, Cd) onto Activated Carbon. Korean J. Chem. Eng., 31(4), 692-700, 2014. [14] Kampalanonwat, P. and Supaphol, P., The Study of Competitive Adsorption of Heavy Metal Ions from Aqueous Solution by Aminated Polyacrylonitrile Nanofiber Mats. Energy Procedia, 56, 142-151, 2014. [15] Yang, J., Wei, W., Pi, S., Ma, F., Li, A., Wu, D. and Xing, J., Competitive Adsorption of Heavy Metals by Extracellular Polymeric Substances Extracted from Klebsiella sp. J1. Bioresource Technology, 196, 533-539, 2015. [16] Sen, N., Obtaining and Characterization of Active Carbon from Hazelnut Shells. (Master Thesis), Firat University, Faculty of Science, Department of Chemical Engineering, Elazıg, 2009. [17] Makeswari, M. and Santhi, T., Optimization of Preparation of Activated Carbon from Ricinus communis Leaves by Microwave-Assisted Zinc Chloride Chemical Activation: Competitive Adsorption of Ni Ions from Aqueous Solution. Hindawi Publishing Corporation Journal of Chemistry, (314790), 1-12, 2013. [18] Akbulut, M., Activated Carbon Production and Characterization from Lignite and Biomass Mixture. (Master Thesis), Ankara University Institute of Science, Department of Chemistry Engineering, Ankara, 2015. [19] Ozturk, D., Investigation of lead adsorption on pumice samples collected from Agrı Mountains and Optimization of ambient conditions by Response surface methods. (Master Thesis), Yuzuncu Yıl University Institute of Science, Department of Chemistry, Van, 2013. [20] Dogan, D., Spectroscopic Analysis of Organic Compounds in Competitive Adsorbent Similar Structures and Adsorption Modeling in Chemistry. (Doctorate thesis), Inonu University Institute of Science, Department of Chemistry, Malatya, 2008. [21] Alp, T., Comparative Study of Growth Kinetics of Various Kinds of Yeast and Mold Mushrooms and Biocorrosion of Cells in Metal Wastewater Containing Heavy Metal Pollution. (Master Thesis), Cumhuriyet University, Institute of Science and Technology, Department of Chemical Engineering, 2007. [22] Sayan, E., Ultrasound-assisted preparation of activated carbon from alkaline impregnated hazelnut shell: An optimization study on removal of Cu2+ from aqueous solution, Chemical Engineering Journal, 115, 213–218, 2006. [23] Şayan, E., Atık Kırmızı Çamurdan Sülfirik Asit Liçingi ile TiO2 in Geri Kazanılmasının İstatistiksel Deney Tasarım Yöntemleri İle İncelenmesi, Atatürk Üniversitesi Fen Bilimleri Enstitüsü,Yüksek Lisans Tezi, Erzurum, 1998. [24] Sayan, E., Bayramoğlu, M., Statistical modeling of sulfuric acid leaching of TiO2, Fe2O3 and Al2O3 from red mud. I. Chem. E. Symp. Ser., Trans. IChemE 79 (B), 291–296, 2001. [25] Şayan, E., Kırmızı Çamurdan TiO2’in Sülfürik Asit İle Liçingi Üzerine Ultrases Gücünün Etkisinin İncelenmesi, İstatistiksel Modellenmesi Ve Optimizasyonu, Atatürk Üniversitesi Fen Bilimleri Enstitüsü, Doktora Tezi, Erzurum, 2002. [26] Myers, R.H., Response Surface Methodology. Allyn and Bacon, N. York. 126 pp, 1971. [27] McKay, G., Use of Adsorbents for the Removal of Pollutants from Wastewater, Tokyo, 1996. [28] İngec, A., Modeling and optimization of Ni2+ adsorption from aqueous solutions with activated carbons prepared by alkali impregnation with ultrasound. (Master Thesis), Ataturk University Institute of Science, Engineering Faculty Chemistry Eng. Dear Mist, Erzurum, 2013. [29] Sayan, E., An Optimization Study on Removal of Zn2+ from Aqueous Solution by Ultrasound-Assisted Preparation of Activated Carbon from Alkaline Impregnated Hazelnut Shell. J. Chem. Soc. Pak., 36, 28-36, 2014. [30] Bourliva A., Michailidis K., Filippidis A., Sikalidis C., Betsiou M., Bantsis G., Copper removal from single and multi-component systems by natural bentonite from milos island, Greece, 8th Panhellenic Scientific Conference on Chemical Engineering, Thessaloniki, Greece, 26-28/05/2011, Proceedings, 8p, 2011. [31] Buscano, S.I., Lourdes, M., Dalida, P., Kan, C., Selectivity sequence and mechanism of adsorption of Cu2+, Ni2+, Pb2+ and Zn2+ onto chitosan-montmorillionite composite beads. Conference: 5th Cross-Straits Drinking Water Symposium, At Macao, China, 2009. [32] Alloway, B.J., Soil processes and the behaviour of metals. In: Alloway, B.J. (Ed.), Heavy metals in Soils. Blackie Academic&Professional, London, pp.11-37, 1995.
There are 1 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Articles
Authors

Berrak Başar This is me

Enes Şayan This is me

Publication Date December 31, 2018
Published in Issue Year 2018 Volume: 19 Issue: 4

Cite

AMA Başar B, Şayan E. OPTIMIZATION OF SELECTIVE CU2+ ADSORPTION WITHIN THE MULTI-ION SYSTEM BY USING ACTIVATED CARBON PREPARED BY ULTRASOUND. Estuscience - Se. December 2018;19(4):893-906. doi:10.18038/aubtda.383584

Cited By

DETERMINATION OF DEEP RED REMOVAL POTENTIAL OF ACTIVATED CARBON PRODUCED FROM WHEAT BRAN
Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering
https://doi.org/10.18038/estubtda.1432952