AN ANALYSIS ON THE USE OF MODIFIED EXPANDED PERLITE AND PUMICE IN INORGANIC BONDED FIBROUS COMPOSITE BOARDS

Yıl 2024, Cilt: 25 Sayı: 3, 490 - 510, 30.09.2024

Lütfullah Gündüz , Şevket Onur Kalkan

https://doi.org/10.18038/estubtda.1447175

Öz

It is often stated that there is an energy efficiency difference between optimum energy use and actual energy use in the world. In the construction industry, various building materials are produced and used to optimize energy efficiency in buildings. Among these building materials, inorganic bonded fibrous composite boards, whose energy efficiency criteria have begun to be improved, are widely used both in Türkiye and in the world. This article presents an experimental analysis of the utilization of modified expanded perlite and pumice as key constituents in the development of inorganic bonded fibrous composite boards. The study investigates the influence of these modified porous materials on the physical, mechanical, and thermal properties of the composite boards. For this purpose; composite mortars were produced using micronized quartz sand, a hybrid fiber consisting of cellulose and glass fiber, modified expanded perlite (MEP) with stearic acid (1, 2, 3, 4, 5, 6, 7, 8, 9 wt.%) and modified pumice (MPU) with stearic acid (1, 2, 3, 4, 5, 6, 7, 8, 9 wt.%). In order to make a comparison, a control mortar that did not contain modified expanded perlite and modified pumice was produced. Through a series of experiments, it is concluded that the density values of all other mixture designs with MEP and MPU aggregate additives under equivalent conditions are lower than the control sample. The water absorption values of the samples always remained below the control sample, and with the increase in the MPU ratio and decrease in the MEP ratio, the water absorption values of the samples also decreased. The average modulus of rupture (MOR) value of control sample in the analysis made after 14 days of curing under ambient conditions is 3.73 MPa. The highest MOR value of the test samples is 3.51 MPa, which is the mixture using the highest MPU. The thermal conductivity value of the control mixture is 0.352 W/mK. The thermal conductivity value of test mixtures with MEP and MPU aggregates varies between 0.175 W/mK and 0.287 W/mK.

Anahtar Kelimeler

Coating for water resistance, Cemented composite board, Modulus of rupture, Thermal properties, Energy saving

Kaynakça

• [1] Altuma MI, Ghasemlounia R. Effects of Construction Materials to Achieve Sustainable Buildings. International Journal of Engineering and Management Research 2021; 11(1): 25-30 .
• [2] Atabay Ş. Determination of exterior material in sustainable buildings by value engineering method according to LEED criteria. Journal of Sustainable Construction Materials and Technologies 2023; 8(1): 1-11.
• [3] Yaman K, Muşmul G. Çevre ve ekonomi ilişkisi üzerine genel bir değerlendirme. Ekonomi İşletme ve Yönetim Dergisi 2018; 2(1): 66-86.
• [4] Yenilenebilir Enerji Geliştirme Müdürlüğü. (2016). Project development process implementation with an integrated building design approach guide. https:// webdosya.csb.gov.tr/db/meslekihizmetler/ustmenu/ ustmenu837.pdf [Turkish]
• [5] Yalçınkaya Ş, Karadeniz İ. The role of waste material in sustainable architecture design. Journal of Architectural Sciences and Applications 2022; 7(2): 750-762.
• [6] Babič NČ, Rebolj D. Culture change in construction industry: from 2D toward BIM based construction. Journal of Information Technology in Construction (ITcon) 2016; 21(6): 86-99.
• [7] Alcindor M, Jackson D. Transmitting culture through building systems: The case of the Tile Vault. Buildings 2023; 13(4): 873.
• [8] Goicoechea ER. Antropología Biosocial: Biología, Cultura y Sociedad (Reprint); Editorial Universitaria Ramón Areces: 2016, Madrid, Spain.
• [9] Orland-Barak L, Becher A. Cycles of action through systems of activity: Examining an action research model through the lens of activity theory. Mind, Culture, and Activity 2011; 18(2): 115-128.
• [10] Rosa A. Acts of psyche. In The Cambridge Handbook of Sociocultural Psychology; Valsiner, J., Rosa, A., Eds.; Cambridge University Press: Cambridge, UK; 2007: pp. 205–237.
• [11] Kwayie AT, Zoya KE, Appiah KA. Physical and mechanical properties of composite fiber board for wall surface finishing. Int J Sci Res 2016; 5(10): 406-413.
• [12] Singh A, Singh J, Ajay S. Properties of fiber cement boards for building partitions. International Journal of Applied Engineering Research 2018; 13(10): 8486-8489.
• [13] Lukmanova LV, Mukhametrakhimov RK, Gilmanshin IR. Investigation of mechanical properties of fiber-cement board reinforced with cellulosic fibers. In IOP Conference Series: Materials Science and Engineering 2019; 570(1): 012113
• [14] Pokorný J, Ševčík R, Šál J, Zárybnická L. Lightweight blended building waste in the production of innovative cement-based composites for sustainable construction. Construction and Building Materials 2021; 299: 123933.
• [15] Ogundipe KE, Ogunbayo BF, Olofinnade OM, Amusan LM, Aigbavboa CO. Affordable housing issue: Experimental investigation on properties of eco-friendly lightweight concrete produced from incorporating periwinkle and palm kernel shells. Results in Engineering2021; 9: 100193.
• [16] Abdellahi SB, Hejazi SM. Effect of glass and polypropylene fibers in cementitious composites containing waste stone powder. Journal of Industrial Textiles 2015; 45(1): 152-168.
• [17] Ranachowski Z, Schabowicz K. The Fabrication, Testing and Application of fibre cement boards. Cambridge Scholars Publishing 2018.
• [18] Schabowicz K, Gorzelanczyk T. Fabrication of fibre cement boards. In The Fabrication, Testing and Application of Fibre Cement Boards, 1st ed.; Ranachowski, Z., Schabowicz, K., Eds.; Cambridge Scholars Publishing:Newcastle upon Tyne, UK, 2018; pp. 7–39. ISBN 978-1-5276-6.
• [19] Ranachowski Z, Schabowicz K. The contribution of fiber reinforcement system to the overall toughness of cellulose fiber concrete panels. Construction and Building Materials 2017; 156: 1028-1034.
• [20] TS EN 12467, (2018). Fibre - cement flat sheets - Product specification and test Methods, p60, Turkish Standard, November 2018, Ankara, Turkey
• [21] Liu YW, Pan HH. Properties of natural fiber cement boards for building partitions, Challenges, Opportunities and Solutions in Structural Engineering and Construction – Ghafoori (ed.) © 2010 Taylor & Francis Group, London, ISBN 978-0-415-56809-8.
• [22] Jarzabek D. Application of advanced optical microscopy. In The Fabrication, Testing and Application of Fibre Cement Boards, 1st ed.; Ranachowski, Z., Schabowicz, K., Eds.; Cambridge Scholars Publishing: Newcastle upon Tyne, UK, 2018; pp. 89–106. ISBN 978-1-5276-6.
• [23] Ardanuy M, Claramunt J, Toledo Filho RD. Cellulosic fiber reinforced cement-based composites: A review of recent research. Construction and building materials 2015; 79: 115-128.
• [24] Chung SY, Sikora P, Kim DJ, El Madawy ME, Abd Elrahman M. Effect of different expanded aggregates on durability-related characteristics of lightweight aggregate concrete. Materials Characterization 2021; 173: 110907.
• [25] Ranachowski Z, Ranachowski P, Dębowski T, Gorzelańczyk T, Schabowicz K. Investigation of structural degradation of fiber cement boards due to thermal impact. Materials 2019; 12(6): 944.
• [26] Ferraz PFP, Mendes RF, Ferraz GAS, Damasceno FA, Silva IMA, Vaz LEVSB, ... , Castro JO. Comparison between the thermal properties of cement composites using infrared thermal images. Agronomy Research 2020; 18(S1); 806-814.
• [27] Benazzouk A, Douzane O, Mezreb K, Laidoudi B, Quéneudec M. Thermal conductivity of cement composites containing rubber waste particles: Experimental study and modelling. Construction and Building Materials 2008; 22(4): 573-579.
• [28] Long HV. Influence of coarse aggregates and mortar matrix on properties of lightweight aggregate concretes. GEOMATE Journal 2020; 19(75): 1-7.
• [29] Moreno-Maroto JM, Beaucour AL, González-Corrochano B, Alonso-Azcárate J. Study of the suitability of a new structural concrete manufactured with carbon fiber reinforced lightweight aggregates sintered from wastes. Materiales de Construcción 2019; 69(336): e204-e204.
• [30] Ramanjaneyulu N, Rao MS, Desai VB. Behavior of Self-Compacting Concrete Partial Replacement of Coarse Aggregate with Pumice Lightweight Aggregate. In International Conference on Advances in Civil Engineering ICACE 2019; 21: 23.
• [31] Zeng Y, Sun P, Tang A, Zhou X. Shear performance of lightweight aggregate concrete with and without chopped fiber reinforced. Construction and Building Materials 2020; 263: 120187.
• [32] Çelikten S, Atabey İİ, Özcan ZA, Durak U, İlkentapar S, Karahan O, Atiş CD. Recycling waste expanded polystyrene as aggregate in production of lightweight screed mortar. Revista de la construcción 2023; 22(3): 581-596.
• [33] Uluer O, Aktaş M, Karaağaç İ, Durmuş G, Khanlari A, Ağbulut Ü, Çelik DN. Mathematical calculation and experimental investigation of expanded perlite based heat insulation materials’ thermal conductivity values. Journal of Thermal Engineering 2018; 4(5): 2274-2286.
• [34] Arifuzzaman MD, Kim HS. Development of new perlite/sodium silicate composites. In International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), Khulna University of Engineering & Technology, Khulna, Bangladesh 2014; 26-27.
• [35] Maxineasa SG, Isopescu DN, Lupu ML, Baciu IR, Pruna L, Somacescu C. The use of perlite in civil engineering applications. In IOP Conference Series: Materials Science and Engineering 2022; 1242(1): 012022.
• [36] Yapıcı F, Özçifçi A, Nemli G, Gencer A, Kurt Ş. The effect of expanded perlite on thermal conductivity of medium density fiberboard (MDF) panel. Technology 2011; 14(2): 47-51.
• [37] Aras U, Kalaycioglu H, Yel H. The effect of using pumice powder and plasticizer on physico-mechanical and thermal properties of cement-bonded particleboards. Drvna industrija 2021; 72(1): 31-37.
• [38] Mohammed TA, Kadhim HM. Sustainable high-strength lightweight concrete with pumice stone and sugar molasses. Journal of the Mechanical Behavior of Materials, 2023; 32(1): 20220231.
• [39] İstek A, Gençer A. Çimentolu yonga levha özelliklerine pomza kullanımının etkisi. I.. Ulusal Akdeniz Orman ve Çevre Sempozyumu, Isparta, Türkiye, 2014; 560-567.
• [40] Kalkan ŞO, Gündüz L. An analysis of the effectiveness of new generation self-levelling lightweight composite screed for underfloor heating systems. Journal of Sustainable Construction Materials and Technologies 2023; 8(3): 16-28.
• [41] Pan J, Zou R, Jin F. Experimental study on specific heat of concrete at high temperatures and its influence on thermal energy storage. Energies 2016; 10(1): 33.
• [42] Kumar A, Shukla SK. A review on thermal energy storage unit for solar thermal power plant application. Energy Procedia 2015; 74: 462-469.
• [43] Gündüz L, Kalkan ŞO, İsker AM, Güreli B, Hacıoğlu S. Farkli su itici ajanlarin inorganik bağli lifli kompozit levhalarda hidrofobik özelliğe etkisi, October 2017, Conference: Uluslararası Yapılarda Kimyasal Katkılar 5. Sempozyumu ve Sergisi, 19-20 Ekim 2017, Ankara
• [44] Akyuncu V, Sanliturk F. Investigation of physical and mechanical properties of mortars produced by polymer coated perlite aggregate. Journal of Building Engineering 2021; 38: 102182.
• [45] Gündüz L, Kalkan ŞO. İnce pomza agreganın çimento esaslı kendiliğinden yayılan tesviye şapının performansına etkisi. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 2023; 12(1): 1-1.
• [46] Gündüz L, Kalkan ŞO. The Effect of Different Natural Porous Aggregates on Thermal Characteristic Feature in Cementitious Lightweight Mortars for Sustainable Buildings. Iranian Journal of Science and Technology, Transactions of Civil Engineering 2023; 47(2): 843-861.
• [47] Şapcı N. Çimento Esaslı Dış Cephe Kaplama Malzemelerinin Üretiminde Kompozit Bileşenli Harçların Teknik Değerlendirilmesi. El-Cezeri 2021; 8(2): 981-993.
• [48] Bauer T, Tamme R, Christ M, Öttinger O. PCM-graphite composites for high temperature thermal energy storage. In Proceedings of the 10th International Conference on Thermal Energy Storage (ECOSTOCK 2006) 2006; 31:.
• [49] Sharma A, Tyagi VV, Chen CR, Buddhi D. Review on thermal energy storage with phase change materials and applications. Renewable and Sustainable energy reviews 2009; 13(2): 318-345.
• [50] Tiari S, Hockins A, Mahdavi M. Numerical study of a latent heat thermal energy storage system enhanced by varying fin configurations. Case Studies in Thermal Engineering 2021; 25: 100999.