1. DergiPark
  2. Gemi ve Deniz Teknolojisi
  3. Arşiv
  4. Sayı 207
Yıl 2017, Cilt , Sayı 207, Sayfalar 7 - 13 2017-04-03

Öz

The effect of single-pass friction stir processing (FSP) on the room temperature impact toughness of a low carbon steel was investigated via Charpy impact test. A fine-grained (FG) microstructure was achieved into the processed zone by large deformation and simultaneous dynamic recrystallization during FSP. The average grain size decreased from 25 μm down to 3.0 μm after FSP. Grain refinement by FSP increased the impact energies as a result of refined grains separated mostly by high-angle of misorientation. Toughness of steel before FSP was about 8.7 J, and it increased up to 11.2 J after processing depending on the notch positions of the samples. The peak impact toughness value of 11.2 J was achieved with the notch position located at top of the surface of processed steel plate. 

Anahtar Kelimeler

Impact toughness, low carbon steel, friction stir processin

Kaynakça

  • Aktarer, S.M., Sekban, D.M., Saray, O., Kucukomeroglu,T., Ma, Z.Y., Purcek, G. (2015) Materials Science and Engineering: A, 636 311-319.
  • Joo, M.S., Suh, D.W., Bhadeshia, H.K.D.H. (2013) Isij Int, 53 1305-1314.
  • Lienert, B.T.J., Stellwag, J.W.L., Grimmett, B.B., Warke, R.W. (2003) Welding Journal Research Supplement, 82 1-9.
  • Ma, Z.Y. (2008) Metall Mater Trans A, 39A 642-658.
  • Ma, Z.Y., Pilchak, A.L., Juhas, M.C., Williams, J.C. (2008) Scripta Mater, 58 361-366.
  • Mishra, R.S., Ma, Z.Y. (2005) Materials Science and Engineering: R: Reports, 50 1-78.
  • Prangnell, P.B., Heason, C.P. (2005) Acta Mater, 53 3179-3192.
  • Ray, A., Paul, S.K., Jha, S. (1995) J Mater Eng Perform, 4 679-688.
  • Santella, M.L., Engstrom, T., Storjohann, D., Pan, T.Y. (2005) Scripta Mater, 53 201-206.
  • Saray, O., Purcek, G., Karaman, I., Maier, H.J. (2012) Metall Mater Trans A, 43A 4320-4330.
  • Song, R., Ponge, D., Raabe, D. (2005) Acta Mater, 53 4881-4892.
  • Su, J. Q., Nelson, T.W., Sterling, C.J. (2005) Scripta Mater, 52 135-140.
  • Xue, P., Xiao, B.L., Wang, W.G., Zhang, Q., Wang, D., Wang, Q.Z., Ma, Z.Y. (2013) Mat Sci Eng a-Struct, 575 30-34.

Ayrıntılar

Bölüm Sayı
Yazarlar

Yazar: Dursun Murat Sekban

Yazar: Semih Mahmut Aktarer

Yazar: Zongyi Ma

Yazar: Gençağa Pürçek
Tarihler

Yayımlanma Tarihi : 3 Nisan 2017

Kaynak Göster

Bibtex @ { gdt303623, journal = {Gemi ve Deniz Teknolojisi}, issn = {1300-1973}, eissn = {2651-530X}, address = {}, publisher = {TMMOB Gemi Mühendisleri Odası}, year = {2017}, volume = {}, pages = {7 - 13}, doi = {}, title = {Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel}, key = {cite}, author = {Sekban, Dursun Murat and Aktarer, Semih Mahmut and Ma, Zongyi and Pürçek, Gençağa} }
APA Sekban, D , Aktarer, S , Ma, Z , Pürçek, G . (2017). Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel . Gemi ve Deniz Teknolojisi , (207) , 7-13 . Retrieved from https://dergipark.org.tr/tr/pub/gdt/issue/28485/303623
MLA Sekban, D , Aktarer, S , Ma, Z , Pürçek, G . "Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel" . Gemi ve Deniz Teknolojisi (2017 ): 7-13 <https://dergipark.org.tr/tr/pub/gdt/issue/28485/303623>
Chicago Sekban, D , Aktarer, S , Ma, Z , Pürçek, G . "Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel". Gemi ve Deniz Teknolojisi (2017 ): 7-13
RIS TY - JOUR T1 - Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel AU - Dursun Murat Sekban , Semih Mahmut Aktarer , Zongyi Ma , Gençağa Pürçek Y1 - 2017 PY - 2017 N1 - DO - T2 - Gemi ve Deniz Teknolojisi JF - Journal JO - JOR SP - 7 EP - 13 VL - IS - 207 SN - 1300-1973-2651-530X M3 - UR - Y2 - 2021 ER -
EndNote %0 Gemi ve Deniz Teknolojisi Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel %A Dursun Murat Sekban , Semih Mahmut Aktarer , Zongyi Ma , Gençağa Pürçek %T Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel %D 2017 %J Gemi ve Deniz Teknolojisi %P 1300-1973-2651-530X %V %N 207 %R %U
ISNAD Sekban, Dursun Murat , Aktarer, Semih Mahmut , Ma, Zongyi , Pürçek, Gençağa . "Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel". Gemi ve Deniz Teknolojisi / 207 (Nisan 2017): 7-13 .
AMA Sekban D , Aktarer S , Ma Z , Pürçek G . Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel. Gemi ve Deniz Teknolojisi. 2017; (207): 7-13.
Vancouver Sekban D , Aktarer S , Ma Z , Pürçek G . Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel. Gemi ve Deniz Teknolojisi. 2017; (207): 7-13.
IEEE D. Sekban , S. Aktarer , Z. Ma ve G. Pürçek , "Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel", Gemi ve Deniz Teknolojisi, sayı. 207, ss. 7-13, Nis. 2017
Makalenin Yazarları
Dursun Murat Sekban [1]
Semih Mahmut Aktarer [2]
Zongyi Ma [3]
Gençağa Pürçek [4]
Makale Gönder
Arşiv
Editör Kurulu
İletişim