Öz
The primary purpose of this study is to investigate the damping characteristics of the ship’s roll motion. The second goal is to explore the damping effects on the solution of roll motion, considering the ship’s forward speed, wave frequency, and initial roll amplitude. Roll motion is a more critical yet less understood response compared to other degrees of freedom due to the complexity arising from viscosity. Roll damping comprises several components, which are divided into five categories with the assistance of empirical formulas created as a result of experiments. Wave damping is calculated by linear diffraction/radiation theory so it is a linear damping. Lift damping is also considered linear. However, eddy making, skin friction, and bilge keel damping are not linear due to dependency on the initial roll amplitude. The effects of roll amplitude, the ship’s forward speed, and wave frequency are investigated in this paper with the empirical formulas developed by Ikeda and Himeno. Frequency domain analyses of the roll motion are also conducted for the selected cases to demonstrate the credibility of the proposed paper. All algorithms have been developed in the MATLAB environment which is embedded with the YTU DEEP Ship Motion Program.
Anahtar Kelimeler
Roll motion roll damping Himeno's method YTU DEEP Ship Motion Program
Proje Numarası
123M482
Kaynakça
- Sir Wescostt, A., (1955). The papers of William Froude M.A LL.D F.R., A Memoir. The Institution of Naval Architects, 11-13.
- Ikeda, Y., Himeno, Y., Tanaka, N., (1978a). Components of roll damping of ship at forward speed. Report No.00404, Department of Naval Architecture, University of Osaka Prefecture, Osaka, Japan.
- Ikeda, Y., Himeno, Y., Tanaka, N., (1978b). A prediction method for ship roll damping. Report No. 00405, Department of Naval Architecture, University of Osaka Prefecture, Osaka, Japan.
- Chakrabarti, S., (2001). Empirical calculation of roll damping for ships and barges. Ocean Engineering, 28, 915–932.
- Himeno, Y., (1981). Prediction of ship roll damping state of the art.,Report No. 239, Department of Naval Architecture and Marine Engineering, The University of Michigan, Ann Arbor, MI. September
- Schmitke, R.T., (1978). Ship Sway, Roll, and Yaw Motions in Oblique Seas. Transactions Society of Naval Arch and Marine Eng.,86.
- Kato, H., (1965). Effects of bilge keels on the rolling of ships. J. Society of Naval Architecture of Japan 117(in Japanese).
- Falzarano, J.M, Somayajula, A. (2015). An Overview of the Prediction Methods for Roll Damping of Ships, Ocean Systems Engineering, 5, 55-76, DOI: 10.12989/ose.2015.5.2.055.
- Olmez A., Cakici F., (2022). Theoretical manual of ‘YTU DEEP’ Ship motion program, 266,112451, Doi: 10.1016/j.oceaneng.2022.112451.
- Submitted by Japan and Report of correspondence group part 2, IMO document (2016). Finalization Of Second Generation Intact Stability Criteria, SDC 4/5/1/Add.1 Annex 2, page 18.
Öz
Bu çalışmanın ilk amacı, geminin yalpa hareketinin sönümlenme karakterinin incelenmesidir. İkincisi ise sönüm parametresinin geminin ileri hızı, dalga frekansı ve başlangıç yalpa genliği açısının yalpa hareketi çözümündeki etkisini araştırmaktır. Yalpa hareketi, diğer serbestlik derecelerinden daha kritik ancak viskozite kaynaklı karmaşık doğasından dolayı en az anlaşılan bir harekettir. Yalpa sönümünün birkaç bileşeni vardır ve bunlar deneyler sonucunda oluşturulan ampirik formüller yardımıyla beş öğeye ayrılmıştır. Dalga sönümü, doğrusal difraksiyon/radyasyon teorisi ile hesaplanır, dolayısıyla doğrusal bir sönümdür. Kaldırma sönümü de doğrusal olarak kabul edilir. Bununla birlikte girdap oluşturma, sürtünme ve yalpa omurgası kaynaklı sönüm, başlangıç yalpa genliğine bağlı olduğundan doğrusal değildir. Bu çalışmada yalpa genliği, geminin ileri hızı ve dalga frekansının etkileri Ikeda ve Himeno tarafından geliştirilen ampirik formüllerle incelenmiştir. Önerilen makalenin güvenilirliğini göstermek için bazı senaryolarda yalpa hareketinin frekans düzlem analizleri de yapılmıştır. Tüm kodlamalar MATLAB kullanılarak yapılmıştır ve YTÜ DEEP Gemi Hareket Programına gömülecektir.
Anahtar Kelimeler
Yalpa Hareketi Yalpa Sönümü Himeno Metodu YTU DEEP Gemi Hareket Programı
Destekleyen Kurum
TÜBİTAK
Proje Numarası
123M482
Kaynakça
- Sir Wescostt, A., (1955). The papers of William Froude M.A LL.D F.R., A Memoir. The Institution of Naval Architects, 11-13.
- Ikeda, Y., Himeno, Y., Tanaka, N., (1978a). Components of roll damping of ship at forward speed. Report No.00404, Department of Naval Architecture, University of Osaka Prefecture, Osaka, Japan.
- Ikeda, Y., Himeno, Y., Tanaka, N., (1978b). A prediction method for ship roll damping. Report No. 00405, Department of Naval Architecture, University of Osaka Prefecture, Osaka, Japan.
- Chakrabarti, S., (2001). Empirical calculation of roll damping for ships and barges. Ocean Engineering, 28, 915–932.
- Himeno, Y., (1981). Prediction of ship roll damping state of the art.,Report No. 239, Department of Naval Architecture and Marine Engineering, The University of Michigan, Ann Arbor, MI. September
- Schmitke, R.T., (1978). Ship Sway, Roll, and Yaw Motions in Oblique Seas. Transactions Society of Naval Arch and Marine Eng.,86.
- Kato, H., (1965). Effects of bilge keels on the rolling of ships. J. Society of Naval Architecture of Japan 117(in Japanese).
- Falzarano, J.M, Somayajula, A. (2015). An Overview of the Prediction Methods for Roll Damping of Ships, Ocean Systems Engineering, 5, 55-76, DOI: 10.12989/ose.2015.5.2.055.
- Olmez A., Cakici F., (2022). Theoretical manual of ‘YTU DEEP’ Ship motion program, 266,112451, Doi: 10.1016/j.oceaneng.2022.112451.
- Submitted by Japan and Report of correspondence group part 2, IMO document (2016). Finalization Of Second Generation Intact Stability Criteria, SDC 4/5/1/Add.1 Annex 2, page 18.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Gemi İnşaatı |
| Bölüm | Araştırma Makalesi |
| Yazarlar | |
| Proje Numarası | 123M482 |
| Yayımlanma Tarihi | 31 Ocak 2024 |
| Yayımlandığı Sayı | Yıl 2023 Sayı: 224 |
- Makale Dosyaları