Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-phase Model: A Numerical Study

Abdullah Dağdeviren

Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-phase Model: A Numerical Study

Abstract

This study numerically investigated the effects of different nanofluids and the added nanoparticle shapes types (brick, cylindrical, platelet, and spherical) and volumetric concentration (𝜑) on the average Nusselt number (Nuave) under natural convection (NC) conditions in a square enclosure. In case of Ra=103, the Nuave increased for all nanofluids (NFs) and shape types. The highest increase was observed with a 56.0% enhancement in the platelet shape of the GO/H2O NF in the 𝜑=5.0%. For all Ra values except Ra=103, the Nuave was generally observed to decrease as 𝜑 increased. For all Ra values and NP shapes, the SiO2/H2O NF exhibited the lowest Nuave values compared to the other NFs. It was emphasized that the use of spherical Al2O3, Fe3O4 and GO NPs provided significant improvements in heat transfer performance in systems operating at high Ra, and it was stated that SiO2-based NFs should be avoided in such applications.

Keywords

References

[1] B. K. Saha, J. I. Jihan, G. Barai, N. J. Moon, G. Saha, and S. C. Saha, “Exploring natural convection and heat transfer dynamics of Al2O3-H2O nanofluid in a modified tooth-shaped cavity configuration,” International Journal of Thermofluids, vol. 25, p. 101005, Jan. 2025. doi: 10.1016/J.IJFT.2024.101005
[2] A. Borrelli, G. Giantesio, and M. C. Patria, “Fully developed flow of a higher-gradient nanofluid in a vertical channel: Mixed and natural convection,” European Journal of Mechanics - B/Fluids, vol. 109, pp. 344–353, Jan. 2025. doi: 10.1016/J.EUROMECHFLU.2024.10.013
[3] M. S. Alam, M. N. Huda, M. M. Rahman, and M. M. Billah, “Statistical and numerical analysis of magnetic field effects on laminar natural convection heat transfer of nanofluid in a hexagonal cavity,” International Journal of Thermofluids, vol. 24, p. 100856, Nov. 2024. doi: 10.1016/J.IJFT.2024.100856
[4] K. B. Saleem, R. J. Mohammed, and G. F. Smaisim, “Natural convective Cu-water nanofluid flow in isosceles triangular cavity with forced free stream cooled sides and localized heated base,” International Journal of Thermofluids, vol. 23, p. 100766, Aug. 2024. doi: 10.1016/J.IJFT.2024.100766
[5] H. Liu, S. Guo, C. Liu, F. Du, B. Li, and J. Hong, “Case study of natural convection topology optimization based on finite volume method,” Case Studies in Thermal Engineering, vol. 66, p. 105697, Feb. 2025. doi: 10.1016/J.CSITE.2024.105697
[6] H. Ghodsinezhad, M. Sharifpur, and J. P. Meyer, “Experimental investigation on cavity flow natural convection of Al2O3–water nanofluids,” International Communications in Heat and Mass Transfer, vol. 76, pp. 316–324, 2016. doi: 10.1016/j.icheatmasstransfer.2016.06.005
[7] A. R. Rahmati and A. A. Tahery, “Numerical study of nanofluid natural convection in a square cavity with a hot obstacle using lattice Boltzmann method,” Alexandria Engineering Journal, vol. 57, no. 3, pp. 1271–1286, 2018. doi: 10.1016/j.aej.2017.03.030
[8] A. Brusly Solomon, J. van Rooyen, M. Rencken, M. Sharifpur, and J. P. Meyer, “Experimental study on the influence of the aspect ratio of square cavity on natural convection heat transfer with Al2O3/Water nanofluids,” International Communications in Heat and Mass Transfer, vol. 88, no. October, pp. 254–261, 2017. doi: 10.1016/j.icheatmasstransfer.2017.09.007

[9] E. Büyük Öǧüt, “Natural convection of water-based nanofluids in an inclined enclosure with a heat source,” International Journal of Thermal Sciences, vol. 48, no. 11, pp. 2063–2073, Nov. 2009. doi: 10.1016/J.IJTHERMALSCI.2009.03.014
[10] F. Garoosi, G. Bagheri, and F. Talebi, “Numerical simulation of natural convection of nanofluids in a square cavity with several pairs of heaters and coolers (HACs) inside,” Int J Heat Mass Transf, vol. 67, pp. 362–376, Dec. 2013. doi: 10.1016/J.IJHEATMASSTRANSFER.2013.08.034
[11] M. Guestal, M. Kadja, and M. Ton Hoang, “Study of heat transfer by natural convection of nanofluids in a partially heated cylindrical enclosure,” Case Studies in Thermal Engineering, vol. 11, pp. 135–144, Mar. 2018. doi: 10.1016/J.CSITE.2018.01.008
[12] A. Dağdeviren, E. Gedik, A. Keçebaş, H. K. Pazarlıoğlu, K. Arslan, and A. I. Alsabery, “ Effect of Al 2 O 3 –SiO 2 /Water Hybrid Nanofluid Filled in a Square Enclosure on the Natural Convective Heat Transfer Characteristics: A Numerical Study ,” Journal of Nanofluids, vol. 11, no. 5, pp. 772–781, 2022. doi: 10.1166/jon.2022.1881
[13] H. K. Pazarlıoğlu and M. Tekir, “Impact of Fe3O4/water on Natural Convection in Square Enclosure,” European Journal of Science and Technology, no. 28, pp. 675–683, 2021. doi: 10.31590/ejosat.1010066
[14] M. A. Ismael, E. Abu-Nada, and A. J. Chamkha, “Mixed convection in a square cavity filled with CuO-water nanofluid heated by corner heater,” Int J Mech Sci, vol. 133, pp. 42–50, Nov. 2017. doi: 10.1016/J.IJMECSCI.2017.08.029
[15] A. H. Bhuiyana, M. S. Alam, and M. A. Alim, “Natural Convection of Water-based Nanofluids in a Square Cavity with Partially Heated of the Bottom Wall,” Procedia Eng, vol. 194, pp. 435–441, Jan. 2017 doi: 10.1016/J.PROENG.2017.08.168
[16] I. D. Garbadeen, M. Sharifpur, J. M. Slabber, and J. P. Meyer, “Experimental study on natural convection of MWCNT-water nanofluids in a square enclosure,” International Communications in Heat and Mass Transfer, vol. 88, pp. 1–8, Nov. 2017. doi: 10.1016/J.ICHEATMASSTRANSFER.2017.07.019
[17] M. A. Sheremet and I. Pop, “Natural Convection in a Square Porous Cavity with Sinusoidal Temperature Distributions on Both Side Walls Filled with a Nanofluid: Buongiorno’s Mathematical Model,” Transp Porous Media, vol. 105, no. 2, pp. 411–429, 2014. doi: 10.1007/s11242-014-0375-7
[18] M. A. Sheremet, C. Revnic, and I. Pop, “Natural convective heat transfer through two entrapped triangular cavities filled with a nanofluid: Buongiorno’s mathematical model,” Int J Mech Sci, vol. 133, pp. 484–494, Nov. 2017. doi: 10.1016/J.IJMECSCI.2017.09.010
[19] S. Y. Motlagh and H. Soltanipour, “Natural convection of Al2O3-water nanofluid in an inclined cavity using Buongiorno’s two-phase model,” International Journal of Thermal Sciences, vol. 111, pp. 310–320, Jan. 2017. doi: 10.1016/J.IJTHERMALSCI.2016.08.022
[20] C. J. Ho, W. K. Liu, Y. S. Chang, and C. C. Lin, “Natural convection heat transfer of alumina-water nanofluid in vertical square enclosures: An experimental study,” International Journal of Thermal Sciences, vol. 49, no. 8, pp. 1345–1353, Aug. 2010. doi: 10.1016/J.IJTHERMALSCI.2010.02.013
[21] M. Siavashi, R. Yousofvand, and S. Rezanejad, “Nanofluid and porous fins effect on natural convection and entropy generation of flow inside a cavity,” Advanced Powder Technology, vol. 29, no. 1, pp. 142–156, 2018. doi: 10.1016/j.apt.2017.10.021
[22] M. Sannad, B. Abourida, and E. H. Belarche, “Numerical study of the effect of the nanofluids type and the size of the heating sections on heat transfer for cooling electronic components,” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, vol. 75, no. 2, pp. 168–184, 2020. doi: 10.37934/ARFMTS.75.2.168184
[23] M. Sannad, A. Btissam, and B. Lahoucine, “Numerical simulation of the natural convection with presence of the nanofluids in cubical cavity,” Math Probl Eng, vol. 2020, 2020. doi: 10.1155/2020/8375405
[24] M. Hemmat Esfe, R. Barzegarian, and M. Bahiraei, “A 3D numerical study on natural convection flow of nanofluid inside a cubical cavity equipped with porous fins using two-phase mixture model,” Advanced Powder Technology, vol. 31, no. 6, pp. 2480–2492, Jun. 2020. doi: 10.1016/J.APT.2020.04.012
[25] F. Selimefendigil and H. F. Öztop, “Control of natural convection in a CNT-water nanofluid filled 3D cavity by using an inner T-shaped obstacle and thermoelectric cooler,” Int J Mech Sci, vol. 169, p. 105104, Mar. 2020. doi: 10.1016/J.IJMECSCI.2019.105104
[26] R. Ellahi, M. Hassan, and A. Zeeshan, “Shape effects of nanosize particles in Cu–H2O nanofluid on entropy generation,” Int J Heat Mass Transf, vol. 81, pp. 449–456, Feb. 2015. doi: 10.1016/J.IJHEATMASSTRANSFER.2014.10.041
[27] O. Ghaffarpasand, “Numerical study of MHD natural convection inside a sinusoidally heated lid-driven cavity filled with Fe3O4-water nanofluid in the presence of Joule heating,” Appl Math Model, vol. 40, no. 21–22, pp. 9165–9182, 2016. doi: 10.1016/j.apm.2016.05.038
[28] S. M. Hashem Zadeh, S. A. M. Mehryan, M. Ghalambaz, M. Ghodrat, J. Young, and A. Chamkha, “Hybrid thermal performance enhancement of a circular latent heat storage system by utilizing partially filled copper foam and Cu/GO nano-additives,” Energy, vol. 213, p. 118761, 2020. doi: 10.1016/j.energy.2020.118761
[29] Z. T. Al-Sharify, A. K. Hussein, A. I. Alsabery, H. A. Alrazen, I. Hashim, and S. M. Abbas, “Natural convection in a 3D trapezoidal cavity with nanofluid and internal cylinders,” J Therm Anal Calorim, no. 0123456789, 2025. doi: 10.1007/s10973-024-13931-w
[30] A. I. Alsabery, E. Gedik, A. J. Chamkha, and I. Hashim, “Effects of two-phase nanofluid model and localized heat source/sink on natural convection in a square cavity with a solid circular cylinder,” Comput Methods Appl Mech Eng, vol. 346, pp. 952–981, 2019. doi: 10.1016/j.cma.2018.09.041
[31] M. Hatami, F. H. Ali, A. I. Alsabery, S. Hu, D. Jing, and F. H. Ali, “Mixed Convection Heat Transfer of Sio2-Water and Alumina-Pao Nano-Lubricants Used in a Mechanical Ball Bearing,” Journal of Thermal Engineering, vol. 7, no. 2, pp. 134–161, 2021. doi: 10.18186/THERMAL.871348
[32] G. A. Sheikhzadeh, M. Dastmalchi, and H. Khorasanizadeh, “Effects of nanoparticles transport mechanisms on Al2O 3-water nanofluid natural convection in a square enclosure,” International Journal of Thermal Sciences, vol. 66, pp. 51–62, 2013. doi: 10.1016/j.ijthermalsci.2012.12.001
[33] C. H. Chon, K. D. Kihm, S. P. Lee, and S. U. S. Choi, “Empirical correlation finding the role of temperature and particle size for nanofluid (Al 2O 3) thermal conductivity enhancement,” Appl Phys Lett, vol. 87, no. 15, pp. 1–3, 2005. doi: 10.1063/1.2093936
[34] M. Corcione, M. Cianfrini, and A. Quintino, “Two-phase mixture modeling of natural convection of nanofluids with temperature-dependent properties,” International Journal of Thermal Sciences, vol. 71, pp. 182–195, 2013. doi: 10.1016/j.ijthermalsci.2013.04.005
[35] A. I. Alsabery, M. A. Sheremet, A. J. Chamkha, and I. Hashim, “Conjugate natural convection of Al2O3–water nanofluid in a square cavity with a concentric solid insert using Buongiorno’s two-phase model,” Int J Mech Sci, vol. 136, no. November 2017, pp. 200–219, 2018. doi: 10.1016/j.ijmecsci.2017.12.025

Details

Primary Language

English

Subjects

Energy Generation, Conversion and Storage (Excl. Chemical and Electrical), Numerical Methods in Mechanical Engineering

Journal Section

Research Article

Authors

Abdullah Dağdeviren ^*
0000-0002-5418-4445
Türkiye

Publication Date

April 30, 2026

Submission Date

July 26, 2025

Acceptance Date

January 11, 2026

Published in Issue

Year 2026 Volume: 12 Number: 1

IZ

https://izlik.org/JA87WR44YT

Cite

RIS / Bibtex

APA

Dağdeviren, A. (2026). Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-phase Model: A Numerical Study. Gazi Journal of Engineering Sciences, 12(1), 1-14. https://izlik.org/JA87WR44YT

AMA

1.Dağdeviren A. Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-phase Model: A Numerical Study. GJES. 2026;12(1):1-14. https://izlik.org/JA87WR44YT

Chicago

Dağdeviren, Abdullah. 2026. “Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-Phase Model: A Numerical Study”. Gazi Journal of Engineering Sciences 12 (1): 1-14. https://izlik.org/JA87WR44YT.

EndNote

Dağdeviren A (April 1, 2026) Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-phase Model: A Numerical Study. Gazi Journal of Engineering Sciences 12 1 1–14.

IEEE

[1]A. Dağdeviren, “Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-phase Model: A Numerical Study”, GJES, vol. 12, no. 1, pp. 1–14, Apr. 2026, [Online]. Available: https://izlik.org/JA87WR44YT

ISNAD

Dağdeviren, Abdullah. “Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-Phase Model: A Numerical Study”. Gazi Journal of Engineering Sciences 12/1 (April 1, 2026): 1-14. https://izlik.org/JA87WR44YT.

JAMA

1.Dağdeviren A. Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-phase Model: A Numerical Study. GJES. 2026;12:1–14.

MLA

Dağdeviren, Abdullah. “Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-Phase Model: A Numerical Study”. Gazi Journal of Engineering Sciences, vol. 12, no. 1, Apr. 2026, pp. 1-14, https://izlik.org/JA87WR44YT.

Vancouver

1.Abdullah Dağdeviren. Influence of Nanoparticles Shape on Natural Convection Mechanism In a Square Enclosure Using Single-phase Model: A Numerical Study. GJES [Internet]. 2026 Apr. 1;12(1):1-14. Available from: https://izlik.org/JA87WR44YT