Araştırma Makalesi
BibTex RIS Kaynak Göster

Ejektör Geometrisinin Ejektörlü Absorpsiyonlu Soğutma Sistemi Performansına Etkisi

Yıl 2015, Cilt: 1 Sayı: 1, 119 - 141, 01.03.2015

Öz

Bu çalışmada, amonyak/sui le çalışan ejektörlü absorpsiyonlu soğutma sisteminde ejector
geometrisinin system performansı üzerine tkileri araştırılmıştır. Ejektör kullanılmasıyla, elde
edilen absorber basıncı eveparotor basıncından daha yüksek olur ve böylece system üçlü basınçla
çalışır. Ejektörün dört fonksiyonu vardır: (I) eveparotördeki basıncın iyileştirilmesine yardım eder,
(ii) eveparotörden gelen amonyakça zayıf eriyiğin ön absorplanmasını sağlar ve karışım işlemini
iyileştirir, (iii) absorber sıcaklığını artırır, (iv) ejektördeki ön absorplama sistemin verimini
iyileştirir. Maksimum COP ve ECOP değerlerinde ejector COP değerini %2.3, ECOP değerinde de
%4.7 iyileşme sağlamıştır. Ayrıca CFD analizi ile ejector geometrisinin teorik olarak tanımlanan
fonksiyonlarını görsel olarak yerine getirdiği tespit edilmiştir.

The Effect of Ejector Geometry on Performance of Ejector Absorption Refrigeration System

Yıl 2015, Cilt: 1 Sayı: 1, 119 - 141, 01.03.2015

Öz

In this study, the effect of ejector geometry on performance of an ejector‐absorption
refrigeration system (EARS) operating with the aqua/ammonia was investigated. By using of the
ejector, the obtained absorber pressure becomes higher than the evaporator pressure and thus
the system works with triple‐pressure‐level. The ejector has four functions: it (i) aided pressure
recovery from the evaporator, (ii) upgraded the mixing process and the pre‐absorption by the
weak solution of the ammonia coming from the evaporator, (iii) increased absorber temperature
and (iv) pre‐absorption in the ejector improves the efficiency of the EARS. Performance
improvement by ejector geometry under maximum COP and ECOP conditions is around 2.3% for
COP and 4.7% for ECOP. CFD analysis of the geometry of the ejector also functions defined
in theory has been found to fulfill visually.

Toplam 0 adet kaynakça vardır.

Ayrıntılar

Diğer ID JA62ZK35VM
Bölüm Makaleler
Yazarlar

Mutlu Tarık Çakır Bu kişi benim

Yayımlanma Tarihi 1 Mart 2015
Gönderilme Tarihi 1 Mart 2015
Yayımlandığı Sayı Yıl 2015 Cilt: 1 Sayı: 1

Kaynak Göster

IEEE M. T. Çakır, “Ejektör Geometrisinin Ejektörlü Absorpsiyonlu Soğutma Sistemi Performansına Etkisi”, GMBD, c. 1, sy. 1, ss. 119–141, 2015.

Gazi Journal of Engineering Sciences (GJES) publishes open access articles under a Creative Commons Attribution 4.0 International License (CC BY) 1366_2000-copia-2.jpg