Usage Of Electroless Ni Plated WC-Ti Powders In Ceramic –Metal Composite

Yıl 2018, Cilt: 5 Sayı: 3, 113 - 123, 28.09.2018

Ayhan Erol

Öz

Metal matrix composites are employed in manufacturing applications such
as cutting disks and tips. Ni-Ti metal matrix composites, that is used as an aerospace
alloy, have been fabricated by tube furnace sintering at various temperatures
with a reinforcing agent of WC. A mixture of %50Ni, %46.66WC and %3.33Ti
powders was sintered in a tube furnace under Ar shroud and electroless plating
technique was employed to deposit a uniform layer of Ni. One of the benefits
that electroless plating provides is that it allows increased density by closer
surface contact. A temperature range of 1000-1400C was used to sinter powders,
which resulted in a composite consisting of a ceramic phase, WC in a metal
matrix of WCNi, NiTi. Several characterization techniques have been used to
reveal the mechanical and physical properties of specimens, such as X-Ray
diffraction, SEM (Scanning Electron Microscope), density and hardness
measurements. Experimental results suggest that the highest sintering
temperature resulted in a hardness of 429.1HV at 1400C. Electroless plating of
%50Ni, %46.66WC and 3.33Ti powders provided a better bonding than conventional
techniques and is a promising technique to produce ceramic reinforced NiWCTi composites.

Anahtar Kelimeler

Ceramic-Metal Composites, Electroless Nickel Coatings

Kaynakça

• 1. C.G. Fink, Trans. Am. Electrochem. Soc. 54 (1928) 315.2. A. Edwards, Prod. Finish. 2 (1959) 66.3. A.E. Grazen, Iron Age. 183 (1959) 944.4. F.J. Sautter, Electrochem. Soc. 110 (1963) 575.5. P.W. Martin, Metal Finish. J 11 (1965) 3396.6. R.V. Williams, Electroplat. Metal Finish. 19 (1966) 927.7. V.P. Greco, W. Baldauf, Plating 55 (1968) 2508.8. Gaard A., Krakhmalev P., Bergstrom J. “Microstructural characterization and wear behavior of (Fe,Ni)–TiC MMC prepared by DMLS”, Journal of Alloys and Compounds, 421 p166–171., 20069. V. Richter and M.V. Ruthendorf, J. Ref. Met. and Mater. 17, pp.141-152., 199910. E. Bergmann, H. Kaufmann, R. Schmid and J. Vogel, Surf.& Coat. Technol. 42, pp.237-251, 199011. S. Zhang, Mater. Sci. Eng. A163, pp.141-148., 199312. Dong-Won Lee, Ji-Hoon. Yu, Jung-Yeul Yun, Farkhod R.Turaev, Tae-Hwan Lim and Taesuk Jang, “Preparation of TiC-Ni nanocomposite powder by a metallothermic chloride reduction”, Journal of Ceramic Processing Research. Vol. 9, No. 4, pp. 407-410, 200813. Frage N., Froumin N., Dariel M.P., “Wetting of TiC by non-reactive liquid metals”, Acta Materialia, 2002, 237–24514. Weimer A. W., 1997, “Carbide, Nitride and Boride Materials Synthesis and Processing”, Springer, ISBN 0412540606, P671.15. Zhang Q., Wu1, M., and Z. Wen ‘Electroless nickel plating on hollow glass microspheres’ ‘Surface & Coatings Technology’ 192 (2005) 213– 21916. Trojanová Z., Lukáˇc P., Ferkel H.and Riehemann W., 2004, “Internal Friction in Microcrystalline and Nanocrystalline Mg”, Materials Science and Engineering A 370, P154-157.17. Erol A., Yönetken A., ‘MW sintering ‘the economic way’ to ceramic reinforced nickel aluminide composites’ , Metal Powder Report, 2009 Vol 64, page 18-25, vol.201,no.8,pp.4694–4701,15 January 2007,