Design and Co-Analysis of A Permanent Magnet Brushless DC Motor By Using Clonal Selection Principle Based Wound Healing Algorithm and Ansys-Maxwell

Yıl 2023, Cilt: 10 Sayı: 4, 499 - 510, 31.12.2023

Yıldırım Özüpak , Mehmet Çınar

https://doi.org/10.54287/gujsa.1371904

Öz

This paper presents the design and analysis of a 550 W Permanent Magnet (PM) Brushless DC motor (BLDC). The finite element method (FEM) was employed to assess the motor's performance characteristics. The design and dynamic performance analysis were conducted using ANSYS/Rmxprt, while electromagnetic studies were carried out using ANSYS/Maxwell-2D. Additionally, optimization of the DC motor was achieved through a Wound Healing Algorithm (WHA). A PID controller was designed for this purpose. The paper also elaborates on the detailed design equations for creating a BLDC motor. BLDC motors are known for their high dynamic responses, efficiency, extended operating life, wide speed change intervals, and noise-free operation. The motor's geometry was modeled in the ANSYS-Maxwell-Rmxprt software tool and later imported into the Maxwell-2D environment for further analysis. The designed motor was observed to operate with 93% efficiency, meeting the specified torque value. The results of the optimization process were interpreted by comparing them with the values obtained from the ANSYS software.

Anahtar Kelimeler

BLDC, WHA, Optimization, PID Controller

Kaynakça

• Bala, M. J., Roy, D. & Sengupta, A. (2020, 5-6 September). The Performance Enhancement of BLDC Motor Using Halbach Array Rotor. In: Proceedings of the 2020 IEEE 1st International Conference for Convergence in Engineering (ICCE), (pp. 405-409), Kolkata, India. https://www.doi.org/10.1109/ICCE50343.2020.9290642
• Bapayya, N. K., & Venkata, R. K. (2020). Direct instantaneous torque control of Brushless DC motor using firefly Algorithm based fractional order PID controller. Journal of King Saud University- Motorering Sciences, 32(2), 133-140. https://www.doi.org/10.1016/j.jksues.2018.04.007
• Dusane, P. M. (2016). Simulation of a Brushless DC Motor in ANSYS- Maxwell 3D, Prague. MSc Thesis, Czech Technical University in Prague.
• Ibrahim, H. E. A., Hassan, F. N., & Anas, O. (2014). Optimal PID control of a brushless DC motor using PSO and BF techniques. Ain Shams Motorering Journal, 5(2), 391-398. https://www.doi.org/10.1016/j.asej.2013.09.013
• Kannojia, P., & Chinmaya, K. A. (2023, 3-5 January). Comparative Review and Finite Element Analysis of Energy Efficient Motors. In: Proceedings of the International Conference on Power Electronics and Energy (ICPEE), Bhubaneswar, India. https://www.doi.org/10.1109/ICPEE54198.2023.10059611
• Kumar, R., Kumar, P., Kumar, B., Singh, P., Kumar, R., & Kumar, A. (2022, 24-25 June). Design and Analysis of High performance of a BLDC Motor for Electric Vehicle. In: Proceedings of the 2nd International Conference on Emerging Frontiers in Electrical and Electronic Technologies (ICEFEET), Patna, India. https://www.doi.org/10.1109/ICEFEET51821.2022.984830
• Kumar, A., Gandhi, R., Wilson, R. & Roy, R. (2020, 18-21 October). The impact of different slot design of BLDC motor in a complete drive system. In: Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, Singapore. https://www.doi.org/10.1109/IECON43393.2020.9255391
• Özüpak, Y., & Aslan, E. (2023). Researching Inductive Power Transfer For Next Generation Electric Vehicles. Ejons International Journal, 7(2), 220-232. https://www.doi.org/0.5281/zenodo.8265795