Mercury Removal from Glycine Leach Solutions Using Sodium Sulfide (Na2S) Precipitation
Abstract
Amino acid leaching has been considered an environmentally friendly alternative for gold recovery; however, the dissolution of mercury (Hg) during the leaching of amalgamation tailings remains a major challenge. This study is a novelty study that focuses on Hg removal by passing the Hg-containing tailings, previously processed by amalgamation, into solution via glycine (NH2CH2COOH) leaching. In this regard, a precipitation method using sodium sulfide (Na₂S) was developed to remove Hg from solutions obtained after glycine leaching. The effects of precipitation time, pH, Na2S dosage, and temperature were investigated. The effects of pH, precipitation time, and temperature were found to be limited within the investigated ranges. The results showed that Na₂S dosage was the most effective parameter in mercury removal. The initial Hg concentration of 12,160 ppb was reduced to 223 ppb at a Na₂S:Hg molar ratio of 60, corresponding to approximately 98% removal efficiency under the selected operating conditions. Increasing the Na₂S:Hg ratio to 80 resulted in a slightly higher removal efficiency (~99%) with a final Hg concentration of 144 ppb; however, a ratio of 60 was considered optimal in terms of reagent consumption and process efficiency. The outcomes indicate that Hg removal with Na₂S is a rapid and effective process under alkaline conditions, while Au remains in solution and Cu and Ag are partially removed, indicating limited selectivity and the need for further optimization. Therefore, this study provides a basis for developing more environmentally friendly processes for amalgamation tailings.
Keywords
Supporting Institution
Project Number
References
- Han C, Wang W, Xie F, Zhang T. Mechanism and kinetics of mercuric sulfide leaching with cuprous-thiosulfate solutions. Sep Purif Technol. 2017;177:223–32.
- United Nations Environment Programme, Arctic Monitoring and Assessment Program. Global Mercury Assessment 2018: Review Draft 2018. 2018;1–81. Available at: https://wedocs.unep.org/bitstream/handle/20.500.11822/25462/GMA 2018-ReviewDraft_250518_CLEAN_SEC. pdf?sequence=1&isAllowed=y
- Keane S, Bernaudat L, Davis KJ, Stylo M, Mutemeri N, Singo P, et al. Mercury and artisanal and small-scale gold mining: Review of global use estimates and considerations for promoting mercury-free alternatives. Ambio. 2023;52(5):833–52.
- Simpson WW, Staker WL, Sandberg RG. Calcium Sulfide Precipitation of Mercury. Bur Mines Rep Investig. 1986;8.
- Nakano K, Shoki K, Yamasue E, Takaoka M. Recycling or chemical stabilization? Greenhouse gas emissions from treatment of waste containing mercury under the Minamata Convention. J Mater Cycles Waste Manag [Internet]. 2023;25(5):2668–80. Available at: https://doi.org/10.1007/s10163-023-01714-8
- De Andrade Lima LRP, Bernardez L, Barbosa LAD. Characterization and treatment of artisanal gold mine tailings. J Hazard Mater. 2008;150:747–53.
- Kantarcı S, Alp İ, Youpoungam AA. Potassium Amyl Xanthate (PAX) as an alternative organic reactive for mercury removal from cyanidation process of amalgamation tailing. Environ Geochem Health. 2024;46(1)(28).
- UNEP. Guidance document on the management of artisanal and small-scale gold mining tailings. 2021;
Details
Primary Language
English
Subjects
Chemical-Biological Recovery Techniques and Ore Dressing , Mining Engineering (Other)
Journal Section
Research Article
Authors
Sadiye Kantarcı
*
0000-0002-1024-0812
Türkiye
İbrahim Alp
0000-0002-6032-3528
Türkiye
Salih Sıvırcık
0009-0002-4207-385X
Türkiye
Publication Date
September 30, 2026
Submission Date
April 3, 2026
Acceptance Date
June 1, 2026
Published in Issue
Year 2026 Volume: 13 Number: 3