Araştırma Makalesi
BibTex RIS Kaynak Göster

Effect of polymer and surfactant concentrations on PVP nanofibers morphology

Yıl 2020, Cilt: 4 Sayı: 2, 99 - 105, 15.08.2020
https://doi.org/10.35860/iarej.692080

Öz

In this study, biocompatible polyvinylpyrrolidone (PVP) based nanofiber production was carried out with various polymer and surfactant concentrations. Firstly; various concentrations of PVP (6, 8, 10, 12, 14, 16 wt %) polymer solutions were prepared, solution properties (conductivity, viscosity, surface tension, pH and density) were determined and nanofiber production was achieved under the optimum process parameters. 12 wt % PVP concentration was chosen as an optimum in terms of nanofiber morphology and fiber fineness. Then, polymer concentration was kept constant at 12 wt % and various concentrations of surfactant (1, 2, 3, 4, 5, 6 wt %) added into the polymer solutions. According to the solution properties and Scanning Electron Microscope (SEM) images; conductivity, viscosity and average fiber diameter increased with polymer and surfactant concentrations increasement and ultra-fine, bead free and uniform nanofibers were obtained. On the other hand, surface tension and pH values were affected by polymer concentration changing, however, surface tension decreased significantly and pH decreased slightly with the addition of surfactant to the PVP polymer solution. Moreover, the density of polymer solutions increased with both polymer solution and surfactant concentration increasement.

Destekleyen Kurum

Suleyman Demirel University Scientific Researches Project

Proje Numarası

FDK-2019-6761

Teşekkür

This work was supported by Suleyman Demirel University Scientific Researches Project Unit under Research Project (project no: FDK-2019-6761). Part of this study was presented at International Conference on Technology and Science organized on 14-16 November, 2019 in Burdur Mehmet Akif Ersoy University.

Kaynakça

  • 1. Subbiah, T., et al., Electrospinning of nanofibers. Journal of applied polymer science, 2005. 96(2): p. 557-569.
  • 2. Tucker, N., et al., The history of the science and technology of electrospinning from 1600 to 1995. Journal of engineered fibers and fabrics, 2012. 7(2_suppl): p. 155892501200702S10.
  • 3. Bhardwaj, N., and S.C. Kundu, Electrospinning: a fascinating fiber fabrication technique. Biotechnology advances, 2010. 28(3): p. 325-347.
  • 4. Dhandayuthapani, B., U.M. Krishnan, and S. Sethuraman, Fabrication and characterization of chitosan‐gelatin blend nanofibers for skin tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2010. 94(1): p. 264-272.
  • 5. Salles, T.H.C., C.B. Lombello, and M.A. d'Ávila, Electrospinning of gelatin/poly (vinyl pyrrolidone) blends from water/acetic acid solutions. Materials Research, 2015. 18(3): p. 509-518.
  • 6. Deitzel, J.M., et al., The effect of processing variables on the morphology of electrospun nanofibers and textiles. Polymer, 2001. 42(1): p. 261-272.
  • 7. Lubasova, D. and L. Martinova, Controlled morphology of porous polyvinyl butyral nanofibers. Journal of Nanomaterials, 2011.
  • 8. Shao, H., et al., Effect of electrospinning parameters and polymer concentrations on mechanical-to-electrical energy conversion of randomly-oriented electrospun poly (vinylidene fluoride) nanofiber mats. RSC advances, 2015. 5(19): p. 14345-14350.
  • 9. Tarus, B., et al., Effect of polymer concentration on the morphology and mechanical characteristics of electrospun cellulose acetate and poly (vinyl chloride) nanofiber mats. Alexandria Engineering Journal, 2016. 55(3): p. 2975-2984.
  • 10. Thompson, C., et al., Effects of parameters on nanofiber diameter determined from electrospinning model. Polymer, 2007. 48(23): p. 6913-6922.
  • 11. Veleirinho, B., M.F. Rei, and J. Lopes‐DA‐Silva, Solvent and concentration effects on the properties of electrospun poly (ethylene terephthalate) nanofiber mats. Journal of Polymer Science Part B: Polymer Physics, 2008. 46(5): p. 460-471.
  • 12. He, J.-H., et al., Electrospun nanofibres and their applications. 2008: ISmithers Shawbury, UK.
  • 13. Ramakrishna, S., et al., An introduction to electrospinning and nanofibers. 2005. Singapura: World Scientific Publishing Company.
  • 14. Rachmawati, H., et al., The in vitro–in vivo safety confirmation of peg-40 hydrogenated castor oil as a surfactant for oral nanoemulsion formulation. Scientia Pharmaceutica, 2017. 85(2): p. 18.
  • 15. Fallahi, D., M. Rafizadeh, N. Mohammadi, and B.Vahidi, Effect of LiCl and non-ionic surfactant on morphology of polystyrene electrospun nanofibers. e-Polymers, 2008. 8(1). p. 1-9.
  • 16. Deng, L., et al., Effects of surfactants on the formation of gelatin nanofibres for controlled release of curcumin. Food chemistry, 2017, 231, p. 70-77.
  • 17. Abutaleb, Ahmed, et al. Effects of surfactants on the morphology and properties of electrospun polyetherimide fibers. Fibers, 2017. 5(3) 33.
  • 18. Cengiz, F. and O. Jirsak, The effect of salt on the roller electrospinning of polyurethane nanofibers. Fibers and Polymers, 2009. 10(2): p. 177-184.
  • 19. Sarac, A.S., Nanofibers of conjugated polymers. 2017: Jenny Stanford Publishing.
  • 20. Sarhan, W.A., H.M. Azzazy, and I.M. El-Sherbiny, The effect of increasing honey concentration on the properties of the honey/polyvinyl alcohol/chitosan nanofibers. Materials Science and Engineering: C, 2016. 67: p. 276-284.
  • 21. Ogino, K., N. Tsubaki, and M. Abe, Solution properties of mixed surfactant system (II): Electric properties of anionic-nonionic surfactants in aqueous solutions. Journal of colloid and interface science, 1984. 98(1): p. 78-83.
  • 22. Santibenchakul, S., S. Chaiyasith, and W. Pecharapa, Effect of PVP concentration on microstructure and physical properties of electrospun SnO2 nanofibers. Integrated Ferroelectrics, 2016, 175(1), p. 130-137.
  • 23. Lee, H., et al., Control of the morphology of cellulose acetate nanofibers via electrospinning. Cellulose, 2018, 25(5), p. 2829-2837.
  • 24. Kuchi, C., and P. S. Reddy, Effect of polymer concentration and annealing temperature on TiO2-PVP composite nanofiber mats prepared with homemade electrospinning. In AIP Conference Proceedings AIP Publishing LLC, 2018, 1953(1): p. 030241.
  • 25. Chang, W., Nanofibers: Fabrication, Performance, and Applications. 2009: Nova Science Publishers, Incorporated.
  • 26. Hu, J., M. P. Prabhakaran, X. Ding, and S. Ramakrishna, Emulsion electrospinning of polycaprolactone: influence of surfactant type towards the scaffold properties. Journal of Biomaterials Science, polymer edition, 2015, 26(1), p. 57-75.
  • 27. Zheng, J. Y., et al., The effect of surfactants on the diameter and morphology of electrospun ultrafine nanofiber. Journal of Nanomaterials, 2014, p. 1-9.
Yıl 2020, Cilt: 4 Sayı: 2, 99 - 105, 15.08.2020
https://doi.org/10.35860/iarej.692080

Öz

Proje Numarası

FDK-2019-6761

Kaynakça

  • 1. Subbiah, T., et al., Electrospinning of nanofibers. Journal of applied polymer science, 2005. 96(2): p. 557-569.
  • 2. Tucker, N., et al., The history of the science and technology of electrospinning from 1600 to 1995. Journal of engineered fibers and fabrics, 2012. 7(2_suppl): p. 155892501200702S10.
  • 3. Bhardwaj, N., and S.C. Kundu, Electrospinning: a fascinating fiber fabrication technique. Biotechnology advances, 2010. 28(3): p. 325-347.
  • 4. Dhandayuthapani, B., U.M. Krishnan, and S. Sethuraman, Fabrication and characterization of chitosan‐gelatin blend nanofibers for skin tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2010. 94(1): p. 264-272.
  • 5. Salles, T.H.C., C.B. Lombello, and M.A. d'Ávila, Electrospinning of gelatin/poly (vinyl pyrrolidone) blends from water/acetic acid solutions. Materials Research, 2015. 18(3): p. 509-518.
  • 6. Deitzel, J.M., et al., The effect of processing variables on the morphology of electrospun nanofibers and textiles. Polymer, 2001. 42(1): p. 261-272.
  • 7. Lubasova, D. and L. Martinova, Controlled morphology of porous polyvinyl butyral nanofibers. Journal of Nanomaterials, 2011.
  • 8. Shao, H., et al., Effect of electrospinning parameters and polymer concentrations on mechanical-to-electrical energy conversion of randomly-oriented electrospun poly (vinylidene fluoride) nanofiber mats. RSC advances, 2015. 5(19): p. 14345-14350.
  • 9. Tarus, B., et al., Effect of polymer concentration on the morphology and mechanical characteristics of electrospun cellulose acetate and poly (vinyl chloride) nanofiber mats. Alexandria Engineering Journal, 2016. 55(3): p. 2975-2984.
  • 10. Thompson, C., et al., Effects of parameters on nanofiber diameter determined from electrospinning model. Polymer, 2007. 48(23): p. 6913-6922.
  • 11. Veleirinho, B., M.F. Rei, and J. Lopes‐DA‐Silva, Solvent and concentration effects on the properties of electrospun poly (ethylene terephthalate) nanofiber mats. Journal of Polymer Science Part B: Polymer Physics, 2008. 46(5): p. 460-471.
  • 12. He, J.-H., et al., Electrospun nanofibres and their applications. 2008: ISmithers Shawbury, UK.
  • 13. Ramakrishna, S., et al., An introduction to electrospinning and nanofibers. 2005. Singapura: World Scientific Publishing Company.
  • 14. Rachmawati, H., et al., The in vitro–in vivo safety confirmation of peg-40 hydrogenated castor oil as a surfactant for oral nanoemulsion formulation. Scientia Pharmaceutica, 2017. 85(2): p. 18.
  • 15. Fallahi, D., M. Rafizadeh, N. Mohammadi, and B.Vahidi, Effect of LiCl and non-ionic surfactant on morphology of polystyrene electrospun nanofibers. e-Polymers, 2008. 8(1). p. 1-9.
  • 16. Deng, L., et al., Effects of surfactants on the formation of gelatin nanofibres for controlled release of curcumin. Food chemistry, 2017, 231, p. 70-77.
  • 17. Abutaleb, Ahmed, et al. Effects of surfactants on the morphology and properties of electrospun polyetherimide fibers. Fibers, 2017. 5(3) 33.
  • 18. Cengiz, F. and O. Jirsak, The effect of salt on the roller electrospinning of polyurethane nanofibers. Fibers and Polymers, 2009. 10(2): p. 177-184.
  • 19. Sarac, A.S., Nanofibers of conjugated polymers. 2017: Jenny Stanford Publishing.
  • 20. Sarhan, W.A., H.M. Azzazy, and I.M. El-Sherbiny, The effect of increasing honey concentration on the properties of the honey/polyvinyl alcohol/chitosan nanofibers. Materials Science and Engineering: C, 2016. 67: p. 276-284.
  • 21. Ogino, K., N. Tsubaki, and M. Abe, Solution properties of mixed surfactant system (II): Electric properties of anionic-nonionic surfactants in aqueous solutions. Journal of colloid and interface science, 1984. 98(1): p. 78-83.
  • 22. Santibenchakul, S., S. Chaiyasith, and W. Pecharapa, Effect of PVP concentration on microstructure and physical properties of electrospun SnO2 nanofibers. Integrated Ferroelectrics, 2016, 175(1), p. 130-137.
  • 23. Lee, H., et al., Control of the morphology of cellulose acetate nanofibers via electrospinning. Cellulose, 2018, 25(5), p. 2829-2837.
  • 24. Kuchi, C., and P. S. Reddy, Effect of polymer concentration and annealing temperature on TiO2-PVP composite nanofiber mats prepared with homemade electrospinning. In AIP Conference Proceedings AIP Publishing LLC, 2018, 1953(1): p. 030241.
  • 25. Chang, W., Nanofibers: Fabrication, Performance, and Applications. 2009: Nova Science Publishers, Incorporated.
  • 26. Hu, J., M. P. Prabhakaran, X. Ding, and S. Ramakrishna, Emulsion electrospinning of polycaprolactone: influence of surfactant type towards the scaffold properties. Journal of Biomaterials Science, polymer edition, 2015, 26(1), p. 57-75.
  • 27. Zheng, J. Y., et al., The effect of surfactants on the diameter and morphology of electrospun ultrafine nanofiber. Journal of Nanomaterials, 2014, p. 1-9.
Toplam 27 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Research Articles
Yazarlar

Hülya Kesici Güler 0000-0002-5793-7772

Funda Cengiz Çallıoğlu 0000-0002-6614-3616

Proje Numarası FDK-2019-6761
Yayımlanma Tarihi 15 Ağustos 2020
Gönderilme Tarihi 21 Şubat 2020
Kabul Tarihi 2 Mayıs 2020
Yayımlandığı Sayı Yıl 2020 Cilt: 4 Sayı: 2

Kaynak Göster

APA Kesici Güler, H., & Cengiz Çallıoğlu, F. (2020). Effect of polymer and surfactant concentrations on PVP nanofibers morphology. International Advanced Researches and Engineering Journal, 4(2), 99-105. https://doi.org/10.35860/iarej.692080
AMA Kesici Güler H, Cengiz Çallıoğlu F. Effect of polymer and surfactant concentrations on PVP nanofibers morphology. Int. Adv. Res. Eng. J. Ağustos 2020;4(2):99-105. doi:10.35860/iarej.692080
Chicago Kesici Güler, Hülya, ve Funda Cengiz Çallıoğlu. “Effect of Polymer and Surfactant Concentrations on PVP Nanofibers Morphology”. International Advanced Researches and Engineering Journal 4, sy. 2 (Ağustos 2020): 99-105. https://doi.org/10.35860/iarej.692080.
EndNote Kesici Güler H, Cengiz Çallıoğlu F (01 Ağustos 2020) Effect of polymer and surfactant concentrations on PVP nanofibers morphology. International Advanced Researches and Engineering Journal 4 2 99–105.
IEEE H. Kesici Güler ve F. Cengiz Çallıoğlu, “Effect of polymer and surfactant concentrations on PVP nanofibers morphology”, Int. Adv. Res. Eng. J., c. 4, sy. 2, ss. 99–105, 2020, doi: 10.35860/iarej.692080.
ISNAD Kesici Güler, Hülya - Cengiz Çallıoğlu, Funda. “Effect of Polymer and Surfactant Concentrations on PVP Nanofibers Morphology”. International Advanced Researches and Engineering Journal 4/2 (Ağustos 2020), 99-105. https://doi.org/10.35860/iarej.692080.
JAMA Kesici Güler H, Cengiz Çallıoğlu F. Effect of polymer and surfactant concentrations on PVP nanofibers morphology. Int. Adv. Res. Eng. J. 2020;4:99–105.
MLA Kesici Güler, Hülya ve Funda Cengiz Çallıoğlu. “Effect of Polymer and Surfactant Concentrations on PVP Nanofibers Morphology”. International Advanced Researches and Engineering Journal, c. 4, sy. 2, 2020, ss. 99-105, doi:10.35860/iarej.692080.
Vancouver Kesici Güler H, Cengiz Çallıoğlu F. Effect of polymer and surfactant concentrations on PVP nanofibers morphology. Int. Adv. Res. Eng. J. 2020;4(2):99-105.



Creative Commons License

Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.