Investigation of friction performance and surface integrity of cryogenically treated AISI 430 ferritic stainless steel

Yıl 2021, Cilt: 5 Sayı: 2, 194 - 201, 15.08.2021

Şenol Şirin Sıtkı Akıncıoğlu

https://doi.org/10.35860/iarej.859730

Cited By: 3

Öz

In this study, the effect of shallow cryogenic treatment on the friction coefficient of AISI 430 ferritic stainless steel was investigated. The friction coefficient experiments were carried out in a ball-on-disc wear tester under 5 N load at 400 rpm. As a result of the tests, the study examined the surface topography of the wear traces, the abrasion profile, microscopic images of the wear traces, and the hardness change of the wear traces. After applying shallow cryogenic treatment, the friction coefficient of the samples was increased by 7.5%. The micro hardness value around the wear traces of the cryogenic (Cryo) samples was 28.4% higher than the value for the commercial samples. The width of the wear trace of the Cryo samples was reduced by 44%. The average roughness value of the wear trace was 33.3% improved in the Cryo sample compared to the commercial sample.

Anahtar Kelimeler

AISI 430 ferric stainless steel, Ball-on-disk test, Friction coefficient, Shallow cryogenic treatment

Kaynakça

• 1. Labiapari, W.S., Ardila, M.A.N., Costa, H.L. and de Mello, J.D.B., Micro abrasion-corrosion of ferritic stainless steels. Wear, 2017. 376: p. 1298-1306.
• 2. Mermi, G. 2012. Paslanmaz çelik malzemenin iç mimari uygulamalarında sürdürülebilirlik açısından değerlendirilmesi. Yüksek Lisans Tezi, Haliç Üniversitesi, Fen Bilimleri Enstitüsü, 85s, İstanbul.
• 3. Akıncıoğlu, S., Sığ kriyojenik işlemin AISI 410 paslanmaz çeliğin fiziksel özelliklerine etkisinin araştırılması. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 2019. 7(3): p. 985-993.
• 4. Çelik, E., Kıvak, T. ve Şirin, Ş., Dubleks paslanmaz çeliğinin farklı soğutma/yağlama yöntemleri altında tornalanmasında kesme sıcaklığının optimizasyonu. in ISMS2019: Ankara. p. 15-17.
• 5. Pekşen, H. 2020. AISI 430 paslanmaz çeliğinin işlenebilirliğinin deneysel olarak incelenmesi. Yüksek Lisans Tezi, Karabük Üniversitesi, Fen Bilimleri Enstitüsü, 78s, Karabük.
• 6. Landolt, D., Mischler, S., Stemp, M. and Barril, S., Third body effects and material fluxes in tribocorrosion systems involving a sliding contact. Wear, 2004. 256(5): p. 517-524.
• 7. Çiçek, A., Kara, F., Kıvak, T. and Ekici, E., Evaluation of machinability of hardened and cryo-treated AISI H13 hot work tool steel with ceramic inserts. International Journal of Refractory Metals and Hard Materials, 2013. 41: p. 461-469.
• 8. Akıncıoğlu, S., Gökkaya, H. and Uygur, İ., The effects of cryogenic-treated carbide tools on tool wear and surface roughness of turning of Hastelloy C22 based on Taguchi method. The International Journal of Advanced Manufacturing Technology, 2016. 82(1-4): 303-314.
• 9. Sundaram, M.M., Yildiz, Y. and Rajurkar K.P., Experimental study of the effect of cryogenic treatment on the performance of electro discharge machining. in MSEC2009: Indiana, USA. p. 4-7.
• 10. Kızılkaya, E. and Ovalı, İ., AISI 4140 çeliğine uygulanan sığ kriyojenik işleminin mekanik özellikler üzerindeki etkisi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2018. 6(1): p. 137-148.
• 11. Şirin, Ş., Akıncıoğlu, S. and Gül, H., Kriyojenik işlem zamanının AISI 430 çeliğinin mekanik özelliklerine etkisi. İleri Teknoloji Bilimleri Dergisi, 2018. 7(3): p.66-71.
• 12. Yamanoğlu, O. 2015. Soğuk iş takım çeliklerinin aşınma direnci üzerinde kriyojenik işlemin etkisi. Yüksek Lisans Tezi, Fen Bilimleri Enstitüsü, Gazi Üniversitesi, 97s, Ankara.
• 13. Sert, A., AISI M2 takım çeliğinin mikroyapısı ve mekanik davranışları üzerine derin kriyojenik ısıl işlemin ve temperlemenin etkisi. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, 2020. 22(66): p. 801-811.
• 14. Baldissera, P., Deep cryogenic treatment of aısı 302 stainless steel: Part I–hardness and tensile properties. Materials & Design, 2010. 31(10): p. 4725-4730.
• 15. Akıncıoğlu, S., Gökkaya, H. and Uygur, İ., A review of cryogenic treatment on cutting tools. The International Journal of Advanced Manufacturing Technology, 2015. 78(9-12): p. 1609-1627.
• 16. Meng, F., Tagashira, K., Azuma, R. and Sohma, H., Role of eta-carbide precipitations in the wear resistance improvements of Fe-12Cr-Mo-V-1.4 C tool steel by cryogenic treatment. ISIJ international, 1994. 34(2): p. 205-210.
• 17. Tyshchenko, A.I., Theisen, W., Oppenkowski, A., Siebert, S., Razumov, O. N., Skoblik, A.P., Sirosh, V.A., Petrov, Yu.N. and Gavriljuk, V.G., Low-temperature martensitic transformation and deep cryogenic treatment of a tool steel. Materials Science and Engineering: A, 2010. 527(26), p. 7027-7039.
• 18. Li, S., Deng, L., Wu, X., Wang, H., Min, Y. and Min, N., Effect of deep cryogenic treatment on internal friction behaviors of cold work die steel and their experimental explanation by coupling model. Materials Science and Engineering: A, 2010. 527(29-30): p. 7950-7954.
• 19. Kalsi, N.S., Sehgal, R. and Sharma, V.S., Cryogenic treatment of tool materials: a review. Materials and Manufacturing Processes, 2010. 25(10): p. 1077-1100.
• 20. Yang, H.S., Jun, W., Bao-Luo, S., Hao-Huai, L., Sheng-Ji, G. and Si-Jiu, H., Effect of cryogenic treatment on the matrix structure and abrasion resistance of white cast iron subjected to destabilization treatment. Wear, 2006. 261(10): p. 1150-1154.
• 21. Akhbarizadeh, A., Shafyei, A. and Golozar, M.A., Effects of cryogenic treatment on wear behavior of D6 tool steel. Materials & Design, 2009. 30(8): p. 3259-3264.
• 22. Bensely, A., Prabhakaran, A., Lal, D.M. and Nagarajan, G., Enhancing the wear resistance of case carburized steel (En 353) by cryogenic treatment. Cryogenics, 2005. 45(12): p. 747-754.
• 23. Molinari, A., Pellizzari, M., Gialanella, S., Straffelini, G. and Stiasny, K.H., Effect of deep cryogenic treatment on the mechanical properties of tool steels. Journal of materials processing technology, 2001. 118(1-3): p. 350-355.