Performance analysis in a two-phase interleaved DC-DC boost converter with coupled inductors

Yıl 2022, Cilt: 10 Sayı: 4, 76 - 83, 31.12.2022

Selami Balcı , Kadir Sabancı

https://doi.org/10.18100/ijamec.1195840

Cited By: 1

Öz

In this study, the inductor current ripple and output voltage ripple of a two-phase DC-DC boost converter, circuit performance is investigated according to the direct/inverse coupling effect of the coupled inductors. The coupled inductors are modeled with both power electronics circuit and electromagnetic modeling and by using finite element analysis software (FEA). However, the high frequency inductor designs generally use air-gapped composite ceramic ferrite cores and are designed with powder core (Kool Mu) core structures that eliminate air gap requirements. Thus, the fringe flux, which occurs in the air gaps in ferrite cores and reduces the useful flux, and the bad effects such as overheating and electromagnetic noises (EMI/EMC) in the air gaps in high frequency switching are also reduced. Especially in interleaved power converter designs, the performances of coupled inductors affect the output parameters of the power electronics circuit. Considering energy efficiency and more compact circuit topologies, the modeling and simulation approach of high-frequency inductors using finite element analysis software, which is emphasized in this study, popularly and scientifically guides power electronics circuit designers.

Anahtar Kelimeler

Coupled inductor, boost converter, power electronics, voltage ripple, FEA

Destekleyen Kurum

Karamanoglu Mehmetbey University, Scientific Research Projects Commission

Proje Numarası

09-M-19

Teşekkür

It was supported within the scope of the project numbered 09-M-19, which was accepted by the Scientific Research Projects Commission of Karamanoğlu Mehmetbey University.

Kaynakça

• [1] S. Balcı , "DA-DA Dönüştürücü Devreleri için Çeşitli İndüktör Nüve Şekillerinin Elektromanyetik ve Mekanik Etkileri Üzerine Karşılaştırmalı Bir Benzetim", Düzce Üniversitesi Bilim ve Teknoloji Dergisi, vol. 7, no. 3, pp. 1130-1139, Jul. 2019.
• [2] P. Arıkan, S. Balcı and F. Battal , "Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations", Balkan Journal of Electrical and Computer Engineering, vol. 8, no. 2, pp. 135-141, Apr. 2020.
• [3] S. Balcı, “The Co-Simulation Studies of the Power Electronic Circuits with FEA Software”. 9th Eur. Conf. Ren. Energy Sys. 21-23 April 2021 Istanbul, Turkey.
• [4] A. A. Yarış, “Yüksek Frekanslı Güç Çeviricilerinde Transformatör ve İndüktör Tasarımı”, Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, İstanbul, 2001.
• [5] J. Czogalla, Jieli Li and C. R. Sullivan, "Automotive application of multi-phase coupled-inductor DC-DC converter", 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, Vol. 3, pp. 1524-1529, 2003.
• [6] M. Shi, “Design and analysis of multiphase DA-DA converters with coupled inductors”, MSc Thesis, Texas A&M University. Texas A&M University, 2007.
• [7] Y. Dong, “Investigation of Multiphase Coupled-Inductor Buck Converters in Point-of-Load Applications”, Doctoral Thesis, Virginia Polytechnic Institute and State University, 2009.
• [8] M. T. Ayhan, “Design and Implementation of Coupled Inductor Cuk Converter Operating in Continuous Conduction Mode”, MSc thesis, The Graduate School Of Natural Aand Aplied Sciences Of Middle East Technical University, 2011.
• [9] I. Sefa, F. Battal and S. Balci, "Modeling and implementation of dsPIC based interleaved buck converter," 4th International Conference on Power Engineering, Energy and Electrical Drives, 2013, pp. 1652-1657, doi: 10.1109/PowerEng.2013.6635865.
• [10] F. Evran, “Yüksek Gerilim Kazançlı Kuplajlı Endüktör Kullanılan Z-Girişli DA-DA Dönüştürücü Topolojileri”, Doktora Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Ankara, 2012.
• [11] J. Lee, H. Cha, D. Shin, K. Lee, D. Yoo and J. Yoo, "Analysis and Design of Coupled Inductors for Two-Phase Interleaved DC-DC Converters," Journal of Power Electronics, vol. 13, no. 3, pp. 339-348, 2013.
• [12] M. Frivaldsky, B. Hanko, M. Prazenica, J. Morgos. “High Gain Boost Interleaved Converters with Coupled Inductors and with Demagnetizing Circuits”, Energies, 11(1):130, 2018.
• [13] Magnetics Powder Core Material KoolMu26u datasheet, Erişim: https://www.mag-inc.com/Media/Magnetics/Datasheets/0078074A7.pdf, 2018, 31 December.
• [14] B. Aslan and S. Balcı , "Sonlu Elemanlar Analizi Yazılımı ile IPM Mil Motor Performans Analizi Üzerine Karşılaştırmalı Bir Benzetim Çalışması", Muş Alparslan Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol. 2, no. 2, pp. 81-90, Dec. 2021.
• [15] J.P.A. Bastos and N. Sadowski, “Electromagnetic Modeling by Finite Element Methods”, Universidade Federal de Santa Catarina Florianopolis, Brazil, Copyright by Marcel Dekker. 2003.
• [16] Sabancı K. , Balcı S. , Aslan M. F. Estimation of the switching losses in DC-DC boost converters by various machine learning methods. Journal of Energy Systems. 2020; 4(1): 1-11.
• [17] B. Aslan, S. Balci, A. Kayabasi, and B. Yildiz., “The core loss estimation of a single phase inverter transformer by using adaptive neuro-fuzzy inference system”, Measurement, Volume 179, 2021, 109427.
• [18] S. Balci, N. Altin, H. Komurcugil and I. Sefa, "Performance analysis of interleaved quadratic boost converter with coupled inductor for fuel cell applications," IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, 2016, pp. 3541-3546, doi: 10.1109/IECON.2016.7794045.