Development of an OPC and PLC Based Remote-Access Laboratory: A Synchronous Motor Control Experiment

Yıl 2015, Cilt: 3 Sayı: 3, 172 - 177, 29.06.2015

Seyfettin Vadi

https://doi.org/10.18100/ijamec.88432

Cited By: 4

Öz

In this study, OPC and PLC based remote-access laboratory has been developed for synchronous motor control experiment. The monitoring and control of the parameters of synchronous motor has been realized using GPRS and Profi-Lab OPC Server through the visual programming language. In addition, S7-1200 CPU 1214 DC/DC/DC series PLC was used for control of the system. The motor parameters monitored in real-time by the user to visually is shown the effect of any change in the parameters of the motor with the help of the user visual interface. This laboratory carried out monitoring and control of a motor rotating motion and more safely by conventional methods. In addition, the experiments are realized GPRS communication method using a synchronous motor without a physical contact between the users. Thanks to the wireless access system, hardware complexity has been eliminated.

Anahtar Kelimeler

Synchronous motor, OPC, GPRS, Remote access, PLC.

Original Research Paper

Öz

Kaynakça

• Kurtkaya, O., Dağ, H., 1600 kW, 6300V Implemented of Synchronous Motor Excitation System with PLC, İstanbul Technic University- Institute of Science, Master Thesis, 2006.
• Ioannides M. G., Design and Implementation of PLC-Based Monitoring Control System for Induction Motor, IEEE Transactions On Energy Conversion, Vol. 19, No. 3, 2004, pp: 469-476.
• Chang, W. F., Wu, F. Y., Chiu, C. W., Development of a web-based remote load supervision and control system, Electrical Power and Energy Systems, Vol. 28, pp: 401–407, 2006.
• Corrado, M., Vito, L. D., Ramos, H., Saliga, J., Hardware and software platform for ADCWAN remote laboratory, Measurement, Vol.45, pp: 795–807, 2012.
• Hua, J., Lin, X., Xu, I., Li, J., Ouyang, M., Bluetooth wireless monitoring, diagnosis and calibration interface for control system of fuel cell bus in Olympic demonstration, Journal of Power Sources, Vol.186, pp:478–484, 2009.
• Huang, L. C., Chang, H. C., Chen, C. C., Kuo, C. C., A ZigBee-based monitoring and protection system for building electrical safety, Energy and Buildings, Vol. 43, pp:1418–1426, 2011.
• Neumann, P., Communication in industrial automation—What is going on?, Control Engineering Practice Vol. 15, pp: 1332–1347, 2007.
• Huida, L., Bingchen, F., Liheng, Y., Yanan, L., RFID-Based Hazardous Waste Management Platform Establishment, Procedia Engineering, Vol.29, pp: 4-8, 2012.
• Ye, H. Z., Peng, J., Design of Wireless Gateway Based on ZigBee and GPRS Technology, Computational Intelligence and Software Engineering International Conference (CiSE 2009), pp:1-4, 2009.
• Li, N., Liu, X., Deng, Z., Su, P., Research for remote management and configuration protocol of RFID Mobile Reader, International Conference on Computer Application and System Modeling (ICCASM 2010), Vol.7-448-451, 2010.
• Wancheng, X., Monitoring System of Power Line Icing Based on GPRS, 2012 International Conference on Medical Physics and Biomedical Engineering, Vol. 33, pp:705 – 711, 2012.
• Gagliarducci, M., Lampasi, D.A., Podesta, L., GSM-based monitoring and control of photovoltaic power generation, Measurement, Vol. 40, pp: 314–321, 2012.
• Bekiroglu, E., Daldal, N., Remote control of an ultrasonic motor by using a GSM mobile phone, Sensors and Actuators A, Vol.120, pp: 536–542, 2005.
• Filibeli, M. C., Ozkasap, O., Civanlar, M. R., Embedded web server-based home appliance networks, Journal of Network and Computer Applications, Vol.30, pp: 499–514, 2007.
• Chunguo, J., Yan, W., Xin, S., Development of an OPC Server for Remote Monitoring and Control Based on GPRS Networks, The Tenth International Conference on Electronic Measurement & Instruments (ICEMI’2011), pp:222-226, 2011.
• Lieping, Z., Aiqun, Z., Yunsheng, Z., On Remote Real-time Communication between MATLAB and PLC Based on OPC Technology, Proceedings of the 26th Chinese Control Conference,pp: 545-548, 2007.
• Sangeetha, A. L., Naveenkumar, B., Balaji Ganesh, A., N. Bharathi, Experimental validation of PID based cascade control system through SCADA–PLC–OPC and internet architectures, Measurement, Vol.45, pp:643–649, 2012.
• Kong, S. C., Yeung, Y. Y., Wu, X. Q., An experience of teaching for learning by observation: Remote-controlled experiments on electrical circuits, Computers & Education, Vol.52, pp: 702–717, 2009.
• Canfora, G., Daponteb, P., Rapuano, S., Remotely accessible laboratory for electronic measurement teaching, Computer Standards & Interfaces, Vol.26, pp:489–499, 2004.
• Xiaorong, C., Zhan, S., Zhenhua, G., Research on Remote Data Acquisition System Based on GPRS, The Eighth International Conference on Electronic Measurement and Instruments(ICEMI’2007), Vol.2, pp:20-23, 2007.
• Wang, J., Zhong, S., Li, X., Wang, F., Development of 20 Liter Spherical Explosion Test Apparatus Based on LabVIEW and OPC Technique", Chinese Control and Decision Conference, pp: 4262-4266, 2010.
• Krejcar, O., Konarik, P., Remote Wireless Low Cost RT Process Control using Windows PLC by MATLAB/Simulink throw the REX Control System, 5th GCC Conference & Exhibition, pp:1-5, 2009.
• Fang, J., Wang,F., Design of Greenhouse Remote Monitoring System based on Labview, Computer Science and Automation Engineering (CSAE), pp: 536-539, 2011.
• Antony, J., Mahato, B., Sharma, S., Chitranshi, G., A Web PLC using distributed web servers for data acquisition and control: Wed based PLC, Information Science and Applications (ICISA), pp: 1-4, 2011.
• Goel, A., Mishra, R. S., Remote Data Acquisition Using Wireless - Scada System, International Journal of Engineering (IJE), Volume (3) : Issue (1), pp: 58-65.
• Al-Khudairy, T. F., Al-Hashemy, B. A. R., Al-Baker M. A. J., Design of a VMEbus-based programmable logic controller(PLC), Microprocessors and Microsystems, Vol.21, pp:329-336, 1998.
• http://www.item.ntnu.no/fag/tm8100/Pensumstoff2004/GPRS_Tutorial.pdf.
• Alagöz, F., Mobile Networks and Data Access Strategies, Kahramanmaraş Sütçü İmam University, Institute of Science, partment of Electrical and Electronics Engineering, Master Thesis, 2005.
• Velagic, J., Kaknjo, J. A., Osmic, N., Dzananovic, T., Networked Based Control and Supervision of Induction Motor Using OPC Server and PLC, 53rd International Symposium ELMAR-2011, pp: 251-255, 2011.
• Anwar, M. R., Anwar, O., Shamim, S. F., Zahid, A. A., Human Machine Interface Using Opc (Ole For Process Control), Engineering, Sciences and Technology, Student Conference,pp:35-40,2004.