Research Article

Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers

Volume: 6 Number: 3 October 3, 2022
EN

Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers

Abstract

In this study, it is aimed to reduce the vibration transmitted to the chassis by using vibration dampers in the connection between the vehicle engine and chassis. A theoretical and experimental study was examined. The vibration damper is an elastic material. In the structure of this material, spring and damping are combined with the suspension system. In this study, insulation ratios between the two were compared using new and old dampers. As the engine speed changes in the vehicles, the vibration size it produces also changes. This causes severe discomfort to the driver and passengers in the vehicle. It was observed that the vibration magnitude passing from the engine to the chassis decreased by 50%. When the old and new dampers are compared, it is seen that the vibration isolation of old dampers is very weak. Therefore, it was concluded that the appropriate damper should be selected according to the mass and operating conditions of the engine. Also, it was observed that vibration amplitude increases at low engine speeds, and vibration amplitude decreases at high engine speeds. It has been found that the new vibration damper is a better insulating material than the worn damper.

Keywords

References

  1. Korkmaz İ. Araçlarda Motor Askı Sistemlerinin İncelenmesi, Yüksek Lisans Tezi. İ.T.Ü. Fen Bilimleri Enstitüsü. İstanbul. 2007.
  2. Gültekin G, Mayda M, ve Milit M. Benzin ve Dizel Motorlarda Devir Sayısının Titreşime Olan Etkisinin İncelenmesi. BEÜ Fen Bilimleri Dergisi. 2017; 6: 39-43.
  3. Coşkun G. Kauçuk Gövdeli Motor Takozunun Sonlu Elemanlar Yöntemiyle Modelleme, Simülasyon ve Testleri. Yüksek Lisans Tezi. İ.T.Ü. Fen Bilimleri Enstitüsü. İstanbul. 2004.
  4. Şengün G. Kauçuk Motor Takozlarının Yorulma Ömürleri. Yüksek Lisans Tezi. Boğaziçi Üniversitesi Fen Bilimleri Enstitüsü. İstanbul. 2005.
  5. Rao S.S. Mechanical Vibrations. Pearson Education. Miami, USA. 2011.
  6. Ünlüsoy YS, Bilal H, ve Çalışkan K, Motor Destek Takozlarının Optimizasyonu. Bursa 5. Otomotiv Teknolojileri Kongresi. Bursa. 07-08 Haziran 2010: 253-266.
  7. Akkuş İ. Araç Motorlarının Şasiye Bağlantı Takozlarının Titreşim Sönümleme Etkisinin İncelenmesi. Yüksek Lisans Tezi. Afyon Kocatepe Üniversitesi Fen Bilimleri Enstitüsü. Afyonkarahisar. 2019.

Details

Primary Language

English

Subjects

Mechanical Engineering

Journal Section

Research Article

Publication Date

October 3, 2022

Submission Date

April 4, 2022

Acceptance Date

September 4, 2022

Published in Issue

Year 2022 Volume: 6 Number: 3

APA
Karabulut, A., Şahman, H., & Korkmaz, B. Ş. (2022). Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers. International Journal of Automotive Science And Technology, 6(3), 302-308. https://doi.org/10.30939/ijastech..1098514
AMA
1.Karabulut A, Şahman H, Korkmaz BŞ. Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers. IJASTECH. 2022;6(3):302-308. doi:10.30939/ijastech.1098514
Chicago
Karabulut, Abdurrahman, Hakan Şahman, and Bahri Şamil Korkmaz. 2022. “Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers”. International Journal of Automotive Science And Technology 6 (3): 302-8. https://doi.org/10.30939/ijastech. 1098514.
EndNote
Karabulut A, Şahman H, Korkmaz BŞ (October 1, 2022) Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers. International Journal of Automotive Science And Technology 6 3 302–308.
IEEE
[1]A. Karabulut, H. Şahman, and B. Ş. Korkmaz, “Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers”, IJASTECH, vol. 6, no. 3, pp. 302–308, Oct. 2022, doi: 10.30939/ijastech..1098514.
ISNAD
Karabulut, Abdurrahman - Şahman, Hakan - Korkmaz, Bahri Şamil. “Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers”. International Journal of Automotive Science And Technology 6/3 (October 1, 2022): 302-308. https://doi.org/10.30939/ijastech. 1098514.
JAMA
1.Karabulut A, Şahman H, Korkmaz BŞ. Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers. IJASTECH. 2022;6:302–308.
MLA
Karabulut, Abdurrahman, et al. “Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers”. International Journal of Automotive Science And Technology, vol. 6, no. 3, Oct. 2022, pp. 302-8, doi:10.30939/ijastech. 1098514.
Vancouver
1.Abdurrahman Karabulut, Hakan Şahman, Bahri Şamil Korkmaz. Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers. IJASTECH. 2022 Oct. 1;6(3):302-8. doi:10.30939/ijastech. 1098514

Cited By


International Journal of Automotive Science and Technology (IJASTECH) is published by Society of Automotive Engineers Turkey

by.png