Investigation of the Effects of Alcohol-Based Fuel Additive on Engine Performance and Exhaust Emissions in a Spark-Ignition Gasoline Engine

Yıl 2021, Cilt: 5 Sayı: 4, 404 - 411, 31.12.2021

Süleyman Üstün

https://doi.org/10.30939/ijastech..1000603

Öz

Although fossil fuel reserves have been decreasing day by day, the high carbon emissions of fossil-based vehicles and the fact that these carbon emissions trigger global warming cau-se researchers to focus on alternative fuels. CO and HC, which form the exhaust emissions of motor vehicles, called unburned fuel, have been, threatened human health. Efforts to re-duce CO2, which triggers global warming, and NOx emissions, which turn into acid rain, are increasing day by day. It is tried to reduce harmful exhaust emissions by mixing ethanol, methanol, propanol, butanol and their derivatives fuels as alcohol-based fuels in motor fuels in certain proportions. The aim of this study is to investigate the usability of waste fusel oil and plant-based methanol as an alternative fuel in internal combustion engines without the need for any auxiliary system and investigate the effects of fusel oil and methanol fuels added to gasoline on engine performance and emissions. In the experimental study, as engi-ne performance, it was determined that the engine torque decreased by 11.62% in F20 fuel and 6.45% in M20 fuel compared to G fuel.While an increase in BSFC values was detected in both test fuels, there was a decrease in EGT values.According to the emission results, an average decrease of 7.31% in F20 fuel and 13.40% in M20 fuel was detected in CO values compared to G fuel, while an increase in CO2 and NOx values occurred.

Anahtar Kelimeler

Methanol, Alternative fuels, Exhaust emissions, Engine performance

Kaynakça

• [1] Mishra, P. C., Gupta, A., Kumar, A., & Bose, A. (2020). Methanol and petrol blended alternate fuel for future sustainable engine: A performance and emission analysis. Measurement, 155, 107519.
• [2] Turnau, S., Mignot, C. S., Mostert, C., & Bringezu, S. (2020). Material or fuel: comparative cradle-to-grave climate and material footprint analysis for the use of methanol from recycled CO2. Green Chemistry, 22(23), 8423-8443.
• [3] Calam,A., Içingur, Y., Solmaz, H.,& Yamik, H., (2015). A Comparison of Engine Performance and the Emission of Fusel Oil and Gasoline Mixtures at Different Ignition Tim-ings.International Journal of Green Energy,12:8, 767 772.
• [4] Şimşek, S., Saygın, H., & Özdalyan, B. (2020). Improvement of fusel oil features and effect of its use in different compression ratios for an SI engine on performance and emission. Energies, 13(7), 1824.
• [5] Üstün, S. (2021). Investigation of engine performance and emission characteristics of organic-based manganese addition into waste fusel oil-diesel mixture. Journal of the Faculty of Engineering and Architecture of Gazi University, 36(3), 1516-1529.
• [6] İçingür Y., Çalam A., (2012). Fuzel Yağı Benzin Karışımlarının Buji İle Ateşlemeli Bir Motorda Performans ve Emisyonlara Etkisi. Journal of the Faculty of Engineering and Ar-chitecture of Gazi University, 27 (1),143-149.
• [7] Eyidoğan,M., Çanakcı, M., Özsezen, A, N., Alptekin, E., Türkcan, A., Kılıçaslan, İ., (2011). Etanol-Benzin Ve Metanol-Benzin Karışımlarının Buji İle Ateşlemeli Bir Motorun Yanma Parametrelerine Ve Egzoz Emisyonlarına Etkisinin İncelenmesi. Journal of the Faculty of Engineering and Architecture of Gazi University, 26 (3),499-507.
• [8] Danaiah, P., Kumar, P. R., & Kumar, D. V. (2013). Effect of methanol gasoline blended fuels on the performance and emissions of SI engine. International Journal of Ambient Energy, 34(4), 175-180.
• [9] Calam, A., Aydoğan, B., & Halis, S. (2020). The comparison of combustion, engine performance and emission characteristics of ethanol, methanol, fusel oil, butanol, isopropanol and naphtha with n-heptane blends on HCCI engine. Fuel, 266, 117071.
• [10] Elfasakhany, A. (2016). Performance and emissions of spark-ignition engine using ethanol–methanol–gasoline, n-butanol–iso-butanol–gasoline and iso-butanol–ethanol–gasoline blends: a comparative study. Engineering science and technology, an international journal, 19(4), 2053-2059.
• [11] Awad, O. I., Ali, O. M., Mamat, R., Abdullah, A. A., Najafi, G., Kamarulzaman, M. K., ... & Noor, M. M. (2017). Using fusel oil as a blend in gasoline to improve SI engine efficiencies: A comprehensive review. Renewable and Sustainable Energy Reviews, 69, 1232-1242.
• [12] Sharudin, H., Abdullah, N. R., Najafi, G., Mamat, R., & Masjuki, H.H. (2017). Investigation of the effects of iso-butanol additives on spark-ignition engine fuelled with methanol-gasoline blends. Applied Thermal Engineering, 114, 593-600.
• [13] Ağbulut, Ü., Sarıdemir, S., & Karagöz, M. (2020). Experimental investigation of fusel oil (isoamyl alcohol) and diesel blends in a CI engine. Fuel, 267, 117042.
• [14] Şimşek, S., Saygın, H., & Özdalyan, B. (2020). Improvement of fusel oil features and effect of its use in different compression ratios for an SI engine on performance and emission. Energies, 13(7), 1824.
• [15] Miganakallu, N., Yang, Z., Rogóż, R., Kapusta, Ł. J., Christensen, C., Barros, S., & Naber, J. (2020). Effect of water-methanol blends on engine performance at borderline knock conditions in gasoline direct injection engines. Applied Energy, 264, 114750.
• [16] Tüpraş Ürünler, (2021). Erişim : https://tprstaticfilessa.blob.core.windows.net/ assets/uploads/ urunler/TPR_YP_ USP_KURSUNSUZ_BENZIN_0243.pdf
• [17] Waluyo, B., Setiyo, M., & Wardana, I. N. G. (2021). Fuel performance for stable homogeneous gasoline-methanol-ethanol blends. Fuel, 294, 120565.
• [18] Celik, M. B., Özdalyan, B., & Alkan, F. (2011). The use of pure methanol as fuel at high compression ratio in a single-cylinder gasoline engine. Fuel, 90(4), 1591-1598.